DIN EN 301489-35 2014.02.01 Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 35: Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 4 2pages
 
DIN EN 301444 2014.02.01 Satellite Earth Stations and Systems (SES) - Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering the essential requirements of article 3.2 of the R& 2pages
 
DIN EN 301025-3 2014.02.01 Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC) - Part 3: Harmonized EN covering the essential requ 2pages
 
DIN EN 15317 2014.02.01 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment  23pages
 
DIN EN 15383 2014.02.01 Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers (includes Amendment A1:2013)  31pages
 
DIN EN 15587 2014.02.01 Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) (includes Amendment A1:2013)  28pages
 
DIN EN 301025-2 2014.02.01 Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC) - Part 2: Harmonized EN covering the essential requ 2pages
 
DIN EN 301025-1 2014.02.01 Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC) - Part 1: Technical characteristics and methods of 2pages
 
DIN EN 15683-2 2014.02.01 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard  37pages
 
DIN EN 300019-2-4 2014.02.01 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (Endorsement of the English v 2pages
 
DIN EN 12098-3 2014.02.01 Controls for heating systems - Part 3: Control equipment for electrical heating systems; German version EN 12098-3:2013  31pages
 
DIN EN 16318 2014.02.01 Fertilizers - Determination of trace elements - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013  20pages
 
DIN EN ISO 28888 2014.02.01 Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013); German version EN ISO 28888:2013  12pages
 
DIN 16742 Berichtigung 1 2014.02.01 Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English, Cori gendum to DIN 16742:2013-10  2pages
 
DIN EN 438-9 2014.02.01 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates  16pages
 
DIN CEN/TR 13259 2014.02.01 Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes; German version CEN/TR 13259:2013  30pages
 
DIN 33899-1 2014.02.01 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications  29pages
 
DIN 33899-2 2014.02.01 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters  23pages
 
DIN 16742 Berichtigung 1 2014.02.01 Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English, Cori gendum to DIN 16742:2013-10  2pages
 
DIN 51517-1 2014.02.01 Lubricants - Lubricating oils - Part 1: Lubricating oils C, Minimum requirements  10pages
 
DIN 14921 2014.02.01 Canvas bag for multi purpose lines for fire brigades  8pages
 
DIN IEC/TS 62239-1 2014.02.01 Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan (IEC/TS 62239-1:2012)  50pages
 
DIN 51130 2014.02.01 Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test  12pages
 
DIN 51131 2014.02.01 Testing of floor coverings - Determination of the anti-slip property - Method for measurement of the sliding friction coefficient  15pages
 
DIN 13182 2014.02.01 Medical instruments - Gall duct forceps type Lahey and Gray  6pages
 
DIN EN ISO 25178-603 2014.02.01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013  34pages
 
DIN 19569-12 2014.02.01 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 12: Conveying equipment  9pages
 
DIN 85031 2014.02.01 Ships and marine technology - Steel expansion joints  15pages
 
DIN 46395 2014.02.01 Machine spools  5pages
 
DIN 25463-2 2014.02.01 Calculation of the decay power in nuclear fuels of light water reactors - Part 2: Mixed-uranium-plutonium oxide (MOX) nuclear fuel for pressurized water reactors  45pages
 
DIN CEN/TS 13149-8 2014.02.01 Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication; English version CEN/TS 13149-8:2013  18pages
 
DIN CEN/TS 16498 2014.02.01 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining; German version CEN/TS 16498:2013  13pages
 
DIN CEN/TS 16499 2014.02.01 Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood; German version CEN/TS 16499:2013  23pages
 
DIN 25463-1 2014.02.01 Calculation of the decay power in nuclear fuels of light water reactors - Part 1: Uranium oxide nuclear fuel for pressurized water reactors  51pages
 
DIN CEN/TS 13149-8 2014.02.01 Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication; English version CEN/TS 13149-8:2013  18pages
 
DIN CEN/TR 16589 2014.02.01 Laboratory installations - Capture devices with articulated extract arm; German version CEN/TR 16589:2013  11pages
 
DIN 18160-60 2014.02.01 Chimneys - Part 60: Assessment of fire resistance for chimneys and components of chimneys - Definitions, requirements and test methods  12pages
 
DIN 20317 2014.02.01 Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design  4pages
 
DIN EN 438-9 2014.02.01 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates; German version EN 438-9:2010+A1:2013  18pages
 
DIN 52115-2 2014.02.01 Test methods for aggregates - Part 2: Impact test on crushed and broken aggregates larger than 32 mm  6pages
 
DIN EN 81-77 2014.02.01 Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions; German version EN 81-77:2013  31pages
 
DIN ISO 6987 2014.02.01 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions (ISO 6987:2012)  28pages
 
DIN ISO 5834-2 2014.02.01 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2011)  9pages
 
DIN EN 280 2014.02.01 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests; German version EN 280:2013  103pages
 
DIN 18896 2014.02.01 Fireplaces fired by solid fuel - Technical specifications for installation  44pages
 
DIN EN ISO 19932-2 2014.02.01 Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013); German version EN ISO 19932-2:2013  31pages
 
DIN ISO 14289-1 2014.02.01 Document management applications - Electronic document file format enhancement for accessibility - Part 1: Use of ISO 32000-1 (PDF/UA-1) (ISO 14289-1:2012)  22pages
 
DIN EN ISO 15798 2014.02.01 Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2013); German version EN ISO 15798:2013  28pages
 
DIN 56928 2014.02.01 Event technology - Technical ceilings and grids - Safety requirements  20pages
 
DIN 10764-2 2014.02.01 Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 2: Method using vacuum oven (routine method)  8pages
 
DIN 4003-174 2014.02.01 Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming  20pages
 
DIN 86066 2014.02.01 Cast steel welding elbows for storm valves - DN 50 to DN 150, flangeconnecting dimensions according to PN 10  7pages
 
DIN 4003-1 2014.02.01 Concept for the design of 3D models based on properties according to DIN 4000 - Part 1: Overview and fundamental principles  14pages
 
DIN 58299 2014.02.01 Toothings (Serrations) for surgical instruments - Profile angles, groove distances  4pages
 
DIN 4000-174 2014.02.01 Tabular layouts of properties - Part 174: Inserts for reaming  13pages
 
DIN 4127 2014.02.01 Earthworks and foundation engineering - Test methods for supporting fluids used in the construction of diaphragm walls and their constituent products  28pages
 
DIN EN 1124-4 2014.02.01 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2013  32pages
 
DIN 4000-76 2014.02.01 Tabular layouts of properties - Part 76: Inserts, indexable  20pages
 
DIN EN 1124-4 2014.02.01 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships  33pages
 
DIN EN 280 2014.02.01 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests  102pages
 
DIN 55404 2014.02.01 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials  5pages
 
DIN SPEC 23605 2014.02.01 Technical prduct specification (TPS) - Application guidance - Structured and commented overview of ISO- and DIN-Standards for technical product dokumentation (TPD) and geometrical product specification (GPS)  62pages
 
DIN EN 81-77 2014.02.01 Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions  31pages
 
DIN 51517-3 2014.02.01 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements  12pages
 
DIN 8472-2 2014.02.01 Basket trolleys - Part 2: Requirements and tests for basket trolleys with base trays with or without a child carrying facility, intended to be used on passenger conveyors  8pages
 
DIN 52033 2014.02.01 Bitumen and bituminous binders - Determination of the stickiness of rapid curing cut-backs  5pages
 
DIN 51517-2 2014.02.01 Lubricants - Lubricating oils - Part 2: Lubricating oils CL, Minimum requirements  12pages
 
DIN 51637 2014.02.01 Liquid petroleum products - Determination of the bio-based hydrocarbon content in diesel fuels and middle distillates using liquid scintillation method  19pages
 
DIN EN ISO 19232-3 2014.02.01 Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013); German version EN ISO 19232-3:2013  16pages
 
DIN EN ISO 18265 2014.02.01 Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013  90pages
 
DIN 58300 2014.02.01 Joints for surgical instruments  8pages
 
VG 95231-5 2014.02.01 Electrical terminal elements - Part 5: Terminal strips, detail standard; Text in German and English  12pages
 
VG 95234-4 2014.02.01 Electrical connectors and plug-and-socket devices, connectors with bayonet coupling, pressure-water tight, up to 245 A - Part 4: Mating dimensions, detail standard; Text in German and English  10pages
 
VG 96918-1 2014.02.01 Electrical connectors for energy supply, bayonet coupling, pressure-water tight - Part 1: Requirements, tests, detail standard; Text in German and English  13pages
 
WL 5.7000 bis 5.7999 2014.02.01 Aerospace series - Non-metallic materials - Paints, survey sheet  6pages
 
VG 96918-6 2014.02.01 Electrical connectors for energy supply, bayonet coupling, pressure-water tight - Part 6: Contacts and contact inserts, detail standard; Text in German and English  15pages
 
VG 96929-4 2014.02.01 Electrical connectors and plug-and-socket devices - High-current connectors with bayonet coupling, pressure-water tight - Part 4: Dimensions, mass, detail standard; Text in German and English  16pages
 
DIN EN ISO 148-1 Beiblatt 1 2014.02.01 Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces  6pages
 
DIN 46395 2014.02.01 Machine spools  5pages
 
DIN 25435-7 2014.01.01 In-service inspections for primary coolant circuit components of light water reactors - Part 7: Radiographic testing  49pages
 
DIN CEN/TR 15449-2 2014.01.01 Geographic information - Spatial data infrastructures - Part 2: Best practices; German version CEN/TR 15449-2:2012  49pages
 
DIN 55423-5 2014.01.01 Transportation chain for meat and meat products - Part 5: Pallet made from polyethylene, 800 mm × 1200 mm × 160 mm; Dimensions, weights  6pages
 
DIN EN 16116-2 2014.01.01 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons; German version EN 16116-2:2013  31pages
 
DIN EN 15503 2014.01.01 Garden equipment - Garden blowers, vacuums and blowers/vacuums - Safety; German version EN 15503:2009+A1:2013  40pages
 
DIN 25435-6 2014.01.01 In-service inspections for primary coolant circuit components of light water reactors - Part 6: Eddy current testing of steam generator heating tubes  20pages
 
DIN EN 16116-2 2014.01.01 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons  32pages
 
DIN 58946-7 2014.01.01 Sterilization - Steam sterilizers - Part 7: Edificial preconditions, requirements for the services and the operation of steam sterilizers used in health care facilities  60pages
 
DIN ISO 9277 2014.01.01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)  28pages
 
DIN 52161-7 2014.01.01 Testing of wood preservatives - Detection of wood preservatives in wood - Part 7: Determination of the content of copper bearing wood preservatives  9pages
 
DIN EN 15503 2014.01.01 Garden equipment - Garden blowers, vacuums and blowers/vacuums - Safety (includes Amendment A1:2013)  38pages
 
DIN EN 16116-1 2014.01.01 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, luggage vans and locomotives; German version EN 16116-1:2013  24pages
 
DIN 55423-6 2014.01.01 Transportation chain for meat and meat products - Part 6: Pallet made from polyethylene, 800 mm × 1200 mm × 160 mm; Construction, requirements and test  12pages
 
DIN 25435-4 2014.01.01 In-service inspections for primary collant circuit components of light water reactors - Part 4: Visual testing  17pages
 
DIN CEN/TR 15449-1 2014.01.01 Geographic information - Spatial data infrastructures - Part 1: Reference model; German version CEN/TR 15449-1:2012  40pages
 
DIN EN 16116-1 2014.01.01 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, luggage vans and locomotives  24pages
 
DIN SPEC 91295 2014.01.01 Data and Process Reference Model for the configuration of producer-distributor-interface in mechanical and plant engineering  25pages
 
DIN EN 13852-1 2014.01.01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2013  104pages
 
DIN EN 15683-1 2014.01.01 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description; German version EN 15683-1:2013  20pages
 
DIN EN 15683-1 2014.01.01 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description  20pages
 
DIN CEN/TR 15449-3 2014.01.01 Geographic information - Spatial data infrastructures - Part 3: Data centric view; German version CEN/TR 15449-3:2012  34pages

DIN 5129 2014.01.01 Splitting hammers  6pages
 
DIN EN 60704-2-14 2014.01.01 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers (IEC 60704-2-14:2013); German ver 15pages
 
DIN ISO 9277 2014.01.01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)  30pages
 
DIN EN ISO 19902 2014.01.01 Petroleum and natural gas industries - Fixed steel offshore structures (ISO 19902:2007 + Amd 1:2013); English version EN ISO 19902:2007 + A1:2013, only on CD-ROM  653pages
 
DIN CWA 16667 2014.01.01 Reference Architecture 2.0 for eBusiness harmonisation in Textile/Clothing and Footwear sectors; English version CWA 16667:2013, only on CD-ROM  383pages
 
DIN 7294 2014.01.01 Axes  7pages
 
DIN 7287 2014.01.01 Steel axes and hatchets - Technical specifications  7pages
 
DIN 7200 2014.01.01 Hollow punches  7pages
 
DIN 5131 2014.01.01 Hatchets  6pages
 
DIN EN 60679-3 2014.01.01 Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections (IEC 60679-3:2012); German version EN 60679-3:2013  26pages
 
DIN EN ISO 19902 2014.01.01 Petroleum and natural gas industries - Fixed steel offshore structures (ISO 19902:2007 + Amd 1:2013); English version EN ISO 19902:2007 + A1:2013, only on CD-ROM  653pages
 
DIN 13164 2014.01.01 First aid material - First aid box B  9pages
 
DIN EN 4263 2014.01.01 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ R _m ≤ 960 MPa; German and English version EN 4263:2013  18pages
 
DIN EN 4263 2014.01.01 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ R _m ≤ 960 MPa; German and English version EN 4263:2013  18pages
 
DIN EN 4262 2014.01.01 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ R _m ≤ 880 MPa; German and English version EN 4262:2013  18pages
 
DIN EN 4262 2014.01.01 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ R _m ≤ 880 MPa; German and English version EN 4262:2013  18pages
 
DIN 4019 2014.01.01 Soil - Analysis of settlement  28pages
 
DIN EN 62563-1 2014.01.01 Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods (IEC 62563-1:2009); German version EN 62563-1:2010  63pages
 
DIN SPEC 4885 2014.01.01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English  28pages
 
DIN SPEC 4885 2014.01.01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English  28pages
 
DIN 5130 2014.01.01 Copper hammers - Dimensions and technical specifications  8pages
 
DIN EN 13852-1 2014.01.01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes  100pages
 
DIN 22102-2 2014.01.01 Conveyor belts with textile plies for bulk goods - Part 2: Testing  7pages
 
DIN 13164 2014.01.01 First aid material - First aid box B  9pages
 
DIN 13167 2014.01.01 First aid material to be carried on motorcycles  6pages
 
DIN 22102-1 2014.01.01 Conveyor belts with textile plies for bulk goods - Part 1: Dimensions, specifications, marking  9pages
 
DIN 8743 2014.01.01 Packaging machines and packaging lines - Key figures to characterise operation behaviour and requirements for data collection in an acceptance test  26pages
 
DIN 25435-1 2014.01.01 In-service inspections for primary coolant circuit components of light water reactors - Part 1: Automated ultrasonic testing  35pages
 
DIN 13167 2014.01.01 First aid material to be carried on motorcycles  6pages
 
DIN 22102-3 2014.01.01 Conveyor belts with textile plies for bulk goods - Part 3: Permanent joints  14pages
 
DIN EN 81-21 Berichtigung 1 2014.01.01 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing buildings; German version EN 81-21:2009+A1:2012; Corrigendum to DIN EN 81 2pages
 
DIN 19695 2014.01.01 Transport and storage of pipes, fittings and prefabricated manhole components made of concrete and steel reinforced concrete  8pages
 
DIN 25435-2 2014.01.01 In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing  16pages
 
DIN EN 12393-3 2014.01.01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 3: Determination and confirmatory tests  22pages
 
DIN EN 12393-3 2014.01.01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 3: Determination and confirmatory tests; German version EN 12393-3:2013  22pages
 
DIN EN 12393-1 2014.01.01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 1: General considerations; German version EN 12393-1:2013  19pages
 
DIN EN 12393-1 2014.01.01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 1: General considerations  19pages
 
DIN IEC/PAS 62814 2014.01.01 Dependability of software products containing reusable components - Guidance for functionality and tests (IEC/PAS 62814:2012)  54pages
 
DIN EN ISO 28881 2014.01.01 Machine tools - Safety - Electro-discharge machines (ISO 28881:2013 + Cor. 1:2013) (includes Corrigendum :2013)  60pages
 
DIN EN ISO 28881 2014.01.01 Machine tools - Safety - Electro-discharge machines (ISO 28881:2013 + Cor. 1:2013); German version EN ISO 28881:2013 + AC:2013  67pages
 
DIN CWA 16667 2014.01.01 Reference Architecture 2.0 for eBusiness harmonisation in Textile/Clothing and Footwear sectors; English version CWA 16667:2013, only on CD-ROM  383pages
 
VG 96921-3 2014.01.01 Electrical connectors and plug-and-socket devices - Connectors, 2 poles, concentric - Part 3: Dimensions, mass, detail standard; Text in German and English  15pages
 
VG 96921-2 2014.01.01 Electrical connectors and plug-and-socket devices - Connectors, 2 poles, concentric - Part 2: Mounting instructions, detail standard; Text in German and English  6pages
 
VG 96921-1 2014.01.01 Electrical connectors and plug-and-socket devices - Connectors, 2 poles, concentric - Part 1: Requirements, tests, detail standard; Text in German and English  10pages
 
VG 95518 2014.01.01 Tent peg with pin; Text in German and English  7pages
 
DIN 8743 2014.01.01 Packaging machines and packaging lines - Key figures to characterise operation behaviour and requirements for data collection in an acceptance test  25pages
 
VG 95370-26 Beiblatt 1 2014.01.01 Electromagnetic compatibility (EMC) - Electromagnetic compatibility of and in systems - Part 26: Limits for interference voltages at receiving antennas; Supplement 1: Comments; Text in German and English  15pages
 
VG 95342-7 2014.01.01 Electrical connectors and plug-and-socket devices - Connectors with thread coupling, water-protected, up to 245 A - Part 7: Accessories, detail standard; Text in German and English  15pages
 
VG 96927-110 2014.01.01 Electrical cable assemblies - Part 110: Cable and insulated wires for the air-defence system "LeFlaSys", detail standard; Text in German and English  13pages
 
VG 96950-3 2014.01.01 Electric power distribution equipment - Part 3: Assembly of power distribution equipment sets, basic standard; Text in German and English  13pages
 
VG 96950-10 2014.01.01 Electric power distribution equipment - Part 10: Assemblies for construction sites (ACS), 125 A, 230/400 V, 50 Hz, 70 kVA, portable, detail standard; Text in German and English  24pages
 
VG 96922-5 2014.01.01 Land vehicles and systems - Representation and maintenance of operational readiness in networked systems - Part 5: Data record requirements, Registration Authority; Text in German and English  123pages
 
DVS 2243 2014.01.01 Laserstrahlschweissen thermoplastischer Kunststoffe  14pages
 
DIN SPEC 77226 2013.12.01 Interfaces between service legislation and standards - Guidelines for standardisation  11pages
 
DIN ISO 12219-4 2013.12.01 Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method (ISO 12219-4:2013)  25pages
 
DIN ISO 24394 2013.12.01 Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components (ISO 24394:2008 + Amd. 1:2013)  38pages
 
DIN ISO 17155 2013.12.01 Soil quality - Determination of abundance and activity of soil microflora using respiration curves (ISO 17155:2012)  17pages
 
DIN EN ISO 1833-25 2013.12.01 Textiles - Quantitative chemical analysis - Part 25: Mixtures of polyester and certain other fibres (method using trichloracetic acid and chloroform) (ISO 1833-25:2013)  12pages
 
DIN EN 419211-2 2013.12.01 Protection profiles for secure signature creation device - Part 2: Device with key generation  44pages
 
DIN EN 419211-2 2013.12.01 Protection profiles for secure signature creation device - Part 2: Device with key generation; German version EN 419211-2:2013  47pages
 
DIN EN ISO 1833-25 2013.12.01 Textiles - Quantitative chemical analysis - Part 25: Mixtures of polyester and certain other fibres (method using trichloracetic acid and chloroform) (ISO 1833-25:2013); German version EN ISO 1833-25:2013  12pages
 
DIN EN ISO 11137-1 2013.12.01 Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006 + Amd 1:2013) (includes Amendment A1:2013)  50pages
 
DIN EN ISO 10675-1 2013.12.01 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008); German version EN ISO 10675-1:2013  18pages
 
DIN EN ISO 12571 2013.12.01 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2013); German version EN ISO 12571:2013  23pages
 
DIN EN ISO 12571 2013.12.01 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2013)  23pages
 
DIN EN ISO 12209 2013.12.01 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013)  25pages
 
DIN EN ISO 19932-1 2013.12.01 Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013); German version EN 19932-1:2013  24pages
 
DIN EN ISO 12209 2013.12.01 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013); German version EN ISO 12209:2013  26pages
 
DIN EN ISO 13015 2013.12.01 Woven fabrics - Distortion - Determination of skew and bow (ISO 13015:2013); German version EN ISO 13015:2013  16pages
 
DIN EN ISO 19932-1 2013.12.01 Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)  24pages
 
DIN EN ISO 13856-3 2013.12.01 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013); German version EN ISO 13856-3:2013  72pages
 
DIN EN ISO 11137-1 2013.12.01 Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006 + Amd 1:2013); German version EN ISO 11137-1:2006 + A1:20 53pages
 
DIN EN ISO 11120/A1 2013.12.01 Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing - Amendment 1: Requirements for design of tubes for embrittling gases (ISO 11120:1999/Am 6pages
 
DIN EN ISO 10675-2 2013.12.01 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2010)  15pages
 
DIN EN ISO 10675-2 2013.12.01 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2010); German version EN ISO 10675-2:2013  17pages
 
DIN EN ISO 10675-1 2013.12.01 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008)  17pages
 
DIN ISO 12219-4 2013.12.01 Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method (ISO 12219-4:2013)  25pages
 
DIN EN ISO 11997-2 2013.12.01 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013  18pages
 
DIN EN ISO 16187 2013.12.01 Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013)  22pages
 
DIN EN ISO 15528 2013.12.01 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013)  20pages
 
DIN EN ISO 15626 2013.12.01 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2011)  16pages
 
DIN EN ISO 14732 2013.12.01 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)  22pages
 
DIN EN ISO 14732 2013.12.01 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013); German version EN ISO 14732:2013  24pages
 
DIN EN ISO 14688-2 2013.12.01 Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2004 + Amd 1:2013); German version EN ISO 14688-2:2004 + A1:2013  23pages
 
DIN EN ISO 14688-1 2013.12.01 Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002 + Amd 1:2013) (includes Amendment A1:2013)  19pages
 
DIN EN ISO 13015 2013.12.01 Woven fabrics - Distortion - Determination of skew and bow (ISO 13015:2013)  16pages
 
DIN EN ISO 16187 2013.12.01 Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013); German version EN ISO 16187:2013  24pages
 
DIN EN ISO 10088 2013.12.01 Small craft - Permanently installed fuel systems (ISO 10088:2013)  17pages
 
DIN EN ISO 16495 2013.12.01 Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)  60pages
 
DIN EN ISO 16495 2013.12.01 Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013); German version EN ISO 16495:2013  59pages
 
DIN EN ISO 16498 2013.12.01 Dentistry - Minimal dental implant data set for clinical use (ISO 16498:2013); German version EN ISO 16498:2013  11pages
 
DIN EN ISO 16498 2013.12.01 Dentistry - Minimal dental implant data set for clinical use (ISO 16498:2013)  11pages
 
DIN EN ISO 14253-1 2013.12.01 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specifications (ISO 14253-1:2013)  21pages
 
DIN EN ISO 13856-3 2013.12.01 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)  67pages
 
DIN EN ISO 14688-1 2013.12.01 Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002 + Amd 1:2013); German version EN ISO 14688-1:2002 + A1:2013  20pages
 
DIN EN ISO 4126-1 2013.12.01 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013); German version EN ISO 4126-1:2013  23pages
 
DIN ISO 2285 2013.12.01 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013)  17pages
 
DIN EN ISO 4833-1 2013.12.01 Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 1: Colony-count at 30 degrees C by the pour plate technique (ISO 4833-1:2013)  16pages
 
DIN EN ISO 4126-7 2013.12.01 Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)  39pages
 
DIN EN ISO 4126-7 2013.12.01 Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013); German version EN ISO 4126-7:2013  41pages