海量最新、最全国外技术标准原文、中文版速递——>点击
首页 > 德国标准 > 正文

DIN 德国标准目录 2014-10

发布-leeglee | 查看- | 发表时间-2015/1/9
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)

 

DIN EN 2267-010 2014.03.01 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard; German and English version EN 2267-010:2013  22pages
 
DIN EN 2665-004 2014.03.01 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard; German and English version EN 2665-004:2013  26pages
 
DIN EN 2665-004 2014.03.01 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard; German and English version EN 2665-004:2013  26pages
 
DIN EN 4156 2014.03.01 Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series; German and English version DIN EN 4156:2013  25pages
 
DIN EN 4156 2014.03.01 Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series; German and English version DIN EN 4156:2013  25pages
 
DIN EN 4632-004 Berichtigung 1 2014.03.01 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels; German version EN 4632-004:2012, Corrigendum to DIN EN 4632-004:2013-11  2pages
 
DIN EN 10049 2014.03.01 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013  14pages
 
DIN EN 12811-4 2014.03.01 Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design  23pages
 
DIN EN 10216-1 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2013  29pages
 
DIN EN 2030 2014.03.01 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm; German and English version EN 2030:2013  18pages
 
DIN EN 10216-3 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2013  38pages
 
DIN EN 10216-4 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2013  32pages
 
DIN EN 10216-5 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2013  46pages
 
DIN EN 10357 2014.03.01 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry; German version EN 10357:2013  12pages
 
DIN EN 12270 2014.03.01 Mountaineering equipment - Chocks - Safety requirements and test methods; German version EN 12270:2013  19pages
 
DIN EN 12270 2014.03.01 Mountaineering equipment - Chocks - Safety requirements and test methods  20pages
 
DIN EN 12276 2014.03.01 Mountaineering equipment - Frictional anchors - Safety requirements and test methods  17pages
 
DIN EN 12276 2014.03.01 Mountaineering equipment - Frictional anchors - Safety requirements and test methods; German version EN 12276:2013  17pages
 
DIN EN 12393-2 2014.03.01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 2: Methods for extraction and cleanup; German version EN 12393-2:2013  44pages
 
DIN EN 12393-2 2014.03.01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 2: Methods for extraction and cleanup  44pages
 
DIN EN 10211 2014.03.01 Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method; German version EN 10211:2013  20pages
 
DIN EN ISO 14819-1 2014.03.01 Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO 14819-1:2013); English version EN ISO 148 57pages
 
DIN EN 13802 2014.03.01 Railway applications - Suspension components - Hydraulic dampers  62pages
 
DIN EN 16400 2014.03.01 Chemicals used for treatment of swimming pool water - Hydrogen peroxide  19pages
 
DIN EN ISO 8637 2014.03.01 Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637:2010, including Amendment 1:2013-04-01)  28pages
 
DIN EN 16399 2014.03.01 Chemicals used for treatment of swimming pool water - Sodium thiosulfate  14pages
 
DIN EN 16381 2014.03.01 Chemicals used for treatment of swimming pool water - Sodium peroxodisulfate  16pages
 
DIN EN 10216-4 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties  32pages
 
DIN EN ISO 8638 2014.03.01 Cardiovascular implants and extracorporeal systems - Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO 8638:2010)  23pages
 
DIN EN 14841 2014.03.01 LPG equipment and accessories - Discharge procedures for LPG rail tankers  10pages
 
DIN EN 15091 2014.03.01 Sanitary tapware - Electronic opening and closing sanitary tapware  53pages
 
DIN EN ISO 8494 2014.03.01 Metallic materials - Tube - Flanging test (ISO 8494:2013)  8pages
 
DIN EN 13727 2014.03.01 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1) (includes Amendment A1:2013)  54pages
 
DIN EN ISO 14238 2014.03.01 Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes (ISO 14238:2012)  20pages
 
DIN EN ISO 5395-2 2014.03.01 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)  43pages
 
DIN EN 12697-41 2014.03.01 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids  14pages
 
DIN EN 16380 2014.03.01 Chemicals used for treatment of swimming pool water - Potassium peroxomonosulfate  16pages
 
DIN EN 16362 2014.03.01 Railway applications - Ground based services - Water restocking equipment  24pages
 
DIN EN ISO 5395-1 2014.03.01 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013)  57pages
 
DIN EN ISO 8980-3 2014.03.01 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2013)  38pages
 
DIN EN 13999-1 2014.03.01 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure  19pages
 
DIN EN 936 2014.03.01 Chemicals used for treatment of water intended for human consumption - Carbon dioxide  18pages
 
DIN EN 690 2014.03.01 Agricultural machinery - Manure spreaders - Safety  33pages
 
VG 95234-6 2014.03.01 Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, pressure-water tight, up to 245 A - Part 6: Contacts and contact inserts, detail standard; Text in German and English  43pages
 
VG 95378-11 2014.03.01 Electromagnetic compatibility (EMC) - Electromagnetic compatibility of electroexplosive devices (EED) - Part 11: Test procedure for proof of immunity to disturbance of EED towards pulses of electrostatic discharge; Text in German and English  17pages
 
VG 95379-212 2014.03.01 Electromagnetic compatibility (EMC) - Electromagnetic compatibility of firing circuits with electro-explosive devices (EED) in systems - Part 212: Test procedures for the determination of immunity margins of firing circuits in passive conditio 22pages
 
DIN EN 13999-2 2014.03.01 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds  15pages
 
DIN EN ISO 17489 2014.03.01 Leather - Chemical tests - Determination of tan content in synthetic tanning agents (ISO 17489:2013)  12pages
 
DIN EN ISO 11064-4 2014.03.01 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013)  45pages
 
DIN EN ISO 5395-3 2014.03.01 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)  51pages
 
DIN EN 474-1 2014.03.01 Earth-moving machinery - Safety - Part 1: General requirements (includes Amendment A4:2013)  67pages
 
DIN EN 14471 2014.03.01 Chimneys - System chimneys with plastic flue liners - Requirements and test methods  97pages
 
DIN EN ISO 8311 2014.03.01 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013)  48pages
 
DIN EN 13277-3 2014.03.01 Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors  11pages
 
DIN EN 16409 2014.03.01 Chemicals used for treatment of water intended for human consumption - Dolomitic lime  18pages
 
DIN EN ISO 20482 2014.03.01 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)  11pages
 
DIN EN ISO 8492 2014.03.01 Metallic materials - Tube - Flattening test (ISO 8492:2013)  7pages
 
DIN EN 1097-9 2014.03.01 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test  14pages
 
DIN EN ISO 20483 2014.03.01 Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2013)  20pages
 
DIN EN ISO 10517 2014.03.01 Powered hand-held hedge trimmers - Safety (ISO 10517:2009 + AMD 1:2013) (includes Amendment :2013)  60pages
 
DIN EN ISO 17304 2014.03.01 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013)  18pages
 
DIN EN 1948-4 2014.03.01 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs (includes Amendment A1:2013)  67pages
 
DIN EN 1997-1 2014.03.01 Eurocode 7: Geotechnical design - Part 1: General rules  175pages
 
DIN 6847-2 2014.03.01 Medical electron accelerators - Part 2: Rules for construction of structural radiation protection  48pages
 
DIN EN 10357 2014.03.01 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry  13pages
 
DIN EN 10216-2 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties  47pages
 
DIN EN ISO 15548-2 2014.03.01 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2013)  32pages
 
DIN EN ISO 306 2014.03.01 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)  24pages
 
DIN ISO 23480 2014.03.01 Tools for pressing - Sliding plates (ISO 23480:2013)  9pages
 
DIN EN 1870-12 2014.03.01 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines  49pages
 
DIN SPEC 32534-4 2014.03.01 Numerical welding simulation - Execution and documentation - Part 4: Example of arc welding process simulation  16pages
 
DIN EN ISO 10360-8 2014.03.01 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)  59pages
 
DIN EN 1634-1 2014.03.01 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows  76pages
 
DIN EN ISO 14889 2014.03.01 Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2013)  15pages
 
DIN ISO 4649 2014.03.01 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)  24pages
 
DIN EN 1996-1-1/NA/A1 2014.03.01 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures; Amendment A1  6pages
 
DIN EN ISO 13734 2014.03.01 Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)  18pages
 
DIN EN 1996-3/NA/A1 2014.03.01 National Annex - Nationally determined parameters - Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures; Amendment A1  8pages
 
DIN EN 10216-5 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes  48pages
 
DIN EN 13278 2014.03.01 Open fronted gas-fired independent space heaters  107pages
 
DIN EN ISO 14119 2014.03.01 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)  78pages
 
DIN EN 10216-3 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes  38pages
 
DIN CEN ISO/TS 8062-2 2014.03.01 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013)  65pages
 
DIN EN 1999-1-1 2014.03.01 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules  226pages
 
DIN EN 10211 2014.03.01 Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method  20pages
 
DVS 2916-1 2014.03.01 Testing of resistance welded joints - Destructive testing, quasi static  12pages
 
DIN EN 16139 2014.03.01 Furniture - Strength, durability and safety - Requirements for non-domestic seating (includes Corrigendum :2013)  19pages
 
DIN EN ISO 15548-1 2014.03.01 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2013)  33pages
 
DIN EN 13279-2 2014.03.01 Gypsum binders and gypsum plasters - Part 2: Test methods  25pages
 
DIN EN 10049 2014.03.01 Measurement of roughness average Ra and peak count RPc on metallic flat products  14pages
 
DIN EN ISO 29461-1 2014.03.01 Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013)  74pages
 
DIN EN ISO 16474-3 2014.03.01 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)  24pages
 
DIN EN 10216-1 2014.03.01 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties  29pages
 
DIN EN 16240 2014.03.01 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods  47pages
 
DIN EN ISO/IEC 19788-3 2014.03.01 Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)  34pages
 
DIN ISO 14289-1 2014.02.01 Document management applications - Electronic document file format enhancement for accessibility - Part 1: Use of ISO 32000-1 (PDF/UA-1) (ISO 14289-1:2012)  20pages
 
DIN EN 12720 2014.02.01 Furniture - Assessment of surface resistance to cold liquids; German version EN 12720:2009+A1:2013  16pages
 
DIN EN 12721 2014.02.01 Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009+A1:2013  14pages
 
DIN EN 12722 2014.02.01 Furniture - Assessment of surface resistance to dry heat; German version EN 12722:2009+A1:2013  14pages
 
DIN EN ISO 10581 2014.02.01 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specification (ISO 10581:2011); German version EN ISO 10581:2013  14pages

DIN EN 10269 2014.02.01 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties  51pages
 
DIN EN 12004 2014.02.01 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation (includes Amendment A1:2012)  35pages
 
DIN EN 12098-3 2014.02.01 Controls for heating systems - Part 3: Control equipment for electrical heating systems  30pages
 
DIN EN ISO 7218 2014.02.01 Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations (ISO 7218:2007 + Amd 1:2013); German version EN ISO 7218:2007 + A1:2013  101pages
 
DIN EN 12496 2014.02.01 Galvanic anodes for cathodic protection in seawater and saline mud  29pages
 
DIN EN 12622 2014.02.01 Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)  64pages
 
DIN EN 12668-3 2014.02.01 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment  12pages
 
DIN EN 15383 2014.02.01 Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers; German version EN 15383:2012+A1:2013  31pages
 
DIN EN 12721 2014.02.01 Furniture - Assessment of surface resistance to wet heat (includes Amendment A1:2013)  14pages
 
DIN EN 12580 2014.02.01 Soil improvers and growing media - Determination of a quantity; German version EN 12580:2013  16pages
 
DIN ISO 6987 2014.02.01 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions (ISO 6987:2012)  27pages
 
DIN ISO 5834-2 2014.02.01 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2011)  9pages
 
DIN EN 12722 2014.02.01 Furniture - Assessment of surface resistance to dry heat (includes Amendment A1:2013)  14pages
 
DIN EN ISO 4892-3 2014.02.01 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2013); German version EN ISO 4892-3:2013  22pages
 
DIN EN 13757-4 2014.02.01 Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands); German version EN 13757-4:2013  74pages
 
DIN EN ISO 28888 2014.02.01 Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013)  12pages
 
DIN EN 14025 2014.02.01 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2013  59pages
 
DIN EN 14025 2014.02.01 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction  58pages
 
DIN EN ISO 25178-603 2014.02.01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)  34pages
 
DIN EN ISO 19232-3 2014.02.01 Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013)  16pages
 
DIN EN ISO 15798 2014.02.01 Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2013)  26pages
 
DIN EN 13757-4 2014.02.01 Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)  69pages
 
DIN EN 1728 2014.02.01 Furniture - Seating - Test methods for the determination of strength and durability; German version EN 1728:2012 + AC:2013  55pages
 
DIN EN 12720 2014.02.01 Furniture - Assessment of surface resistance to cold liquids (includes Amendment A1:2013)  16pages
 
DIN EN 10269 2014.02.01 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:2013  50pages
 
DIN EN 1870-11 2014.02.01 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws); German version EN 1870-11:2013  46pages
 
DIN EN 1870-11 2014.02.01 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)  47pages
 
DIN EN 2833-005 2014.02.01 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate; German and English version EN 2833-005:2013  19pages
 
DIN EN 2833-005 2014.02.01 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate; German and English version EN 2833-005:2013  19pages
 
DIN EN ISO 14582 2014.02.01 Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013); German version EN ISO 14582:2013  13pages
 
DIN EN 1728 2014.02.01 Furniture - Seating - Test methods for the determination of strength and durability (includes Corrigendum :2013)  59pages
 
DIN EN ISO 14581 2014.02.01 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013); German version EN ISO 14581:2013  13pages
 
DIN EN 3866 2014.02.01 Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple; German and English version EN 3866:2013  17pages
 
DIN EN 3866 2014.02.01 Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple; German and English version EN 3866:2013  17pages
 
DIN EN 3983 2014.02.01 Aerospace series - Aluminium alloy AL-P7050 - T7651 - Plate - 6 mm < a ≤ 160 mm; German and English version EN 3983:2013  18pages
 
DIN EN 3983 2014.02.01 Aerospace series - Aluminium alloy AL-P7050 - T7651 - Plate - 6 mm < a ≤ 160 mm; German and English version EN 3983:2013  18pages
 
DIN EN 4537-2 2014.02.01 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series; German and English version EN 4537-2:2009  41pages
 
DIN EN 12668-3 2014.02.01 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment; German version EN 12668-3:2013  13pages
 
DIN EN ISO 14113 2014.02.01 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013); German version EN ISO 14113:2013  20pages
 
DIN EN 12622 2014.02.01 Safety of machine tools - Hydraulic press brakes; German version EN 12622:2009+A1:2013  69pages
 
DIN EN 12004 2014.02.01 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation; German version EN 12004:2007+A1:2012  36pages
 
DIN EN ISO 18265 2014.02.01 Metallic materials - Conversion of hardness values (ISO 18265:2013)  93pages
 
DIN EN ISO 11252 2014.02.01 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013); German version EN ISO 11252:2013  21pages
 
DIN EN 16318 2014.02.01 Fertilizers - Determination of trace elements - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)  20pages
 
DIN 51517-3 2014.02.01 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements  12pages
 
DIN 51517-2 2014.02.01 Lubricants - Lubricating oils - Part 2: Lubricating oils CL, Minimum requirements  12pages
 
DIN 51517-1 2014.02.01 Lubricants - Lubricating oils - Part 1: Lubricating oils C, Minimum requirements  10pages
 
DIN EN 12496 2014.02.01 Galvanic anodes for cathodic protection in seawater and saline mud; German version EN 12496:2013  31pages
 
DIN EN 12579 2014.02.01 Soil improvers and growing media - Sampling  16pages
 
DIN EN 12579 2014.02.01 Soil improvers and growing media - Sampling; German version EN 12579:2013  16pages
 
DIN EN 12580 2014.02.01 Soil improvers and growing media - Determination of a quantity  16pages
 
DIN EN ISO 14582 2014.02.01 Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)  14pages
 
DIN EN 4537-2 2014.02.01 Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series; German and English version EN 4537-2:2009  41pages
 
DIN EN 61968-1 2014.02.01 Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations (IEC 61968-1:2012); German version EN 61968-1:2013  73pages
 
DIN EN 16402 2014.02.01 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing; German version EN 16402:2013  44pages
 
DIN EN 16423 2014.02.01 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013  27pages
 
DIN EN 60286-3 2014.02.01 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:2013); German version EN 60286-3:2013  39pages
 
DIN EN 60444-6 2014.02.01 Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 60444-6:2013); German version EN 60444-6:2013  21pages
 
DIN EN 60469 2014.02.01 Transitions, pulses and related waveforms - Terms, definitions and algorithms (IEC 60469:2013); German version EN 60469:2013  71pages
 
DIN EN 60810 2014.02.01 Lamps for road vehicles - Performance requirements (IEC 60810:2003 + A1:2008 + A2:2013); German version EN 60810:2003 + A1:2008 + A2:2013  47pages
 
DIN EN 61189-11 2014.02.01 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 11: Measurement of melting temperature or melting temperature ranges of solder alloys (IEC 61189-11:2013); German version EN 61189 17pages
 
DIN EN 61191-1 2014.02.01 Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:2013); German version EN 61191-1:2013  51pages
 
DIN EN 61191-2 2014.02.01 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (IEC 61191-2:2013); German version EN 61191-2:2013  28pages
 
DIN EN 61300-2-44 2014.02.01 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2013); German version EN 61300-2-44:2013  10pages
 
DIN EN 61300-3-50 2014.02.01 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches (IEC 61300-3-50:2013); German version EN 61300-3-50:2013  14pages
 
DIN EN 61747-2-1 2014.02.01 Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification (IEC 61747-2-1:2013); German version EN 61747-2-1:2013  15pages
 
DIN EN 15317 2014.02.01 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013  23pages
 
DIN EN 61850-10 2014.02.01 Communication networks and systems for power utility automation - Part 10: Conformance testing (IEC 61850-10:2012); English version EN 61850-10:2013  93pages
 
DIN EN 300019-2-3 2014.02.01 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations (Endorsement of the English versi 2pages
 
DIN EN 61968-11 2014.02.01 Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution (IEC 61968-11:2013); English version EN 61968-11:2013  271pages
 
DIN EN 61968-11 2014.02.01 Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution (IEC 61968-11:2013); English version EN 61968-11:2013  271pages
 
DIN EN 62127-3 2014.02.01 Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz (IEC 62127-3:2007 + A1:2013); German version EN 62127-3:2007 + A1:2013  23pages
 
DIN EN 16423 2014.02.01 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection  26pages
 
DIN EN 62287-2 2014.02.01 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques (IEC 62287-2:2013); English 93pages
 
DIN EN 16402 2014.02.01 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing  44pages
 
DIN EN 16401 2014.02.01 Chemicals used for treatment of swimming pool water - Sodium chloride used for electrochlorinator systems  15pages
 
DIN EN 62287-2 2014.02.01 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques (IEC 62287-2:2013); English 93pages
 
DIN EN 62683 2014.02.01 Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2013); German version EN 62683:2013  58pages
 
DIN EN 62739-1 2014.02.01 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing (IEC 62739-1:2013); German version EN 62739-1:2013  19pages
 
DIN EN 300019-2-2 2014.02.01 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2: Specification of environmental tests; Transportation (Endorsement of the English version EN 300 019-2-2 V2.3.1 (2013 2pages
 
DIN EN 16319 2014.02.01 Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution  19pages
 
DIN EN 61850-10 2014.02.01 Communication networks and systems for power utility automation - Part 10: Conformance testing (IEC 61850-10:2012); English version EN 61850-10:2013  93pages
 
DIN EN 301908-3 2014.02.01 IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) (Endorsement of the English Version EN 301 908-3 V6.2.1 (2013-10) as 2pages
 
DIN EN ISO 14581 2014.02.01 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)  14pages
 
DIN EN 15587 2014.02.01 Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.); German version EN 15587:2008+A1:2013  26pages
 
DIN EN ISO 14113 2014.02.01 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)  20pages
 
DIN EN 15683-2 2014.02.01 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 15683-2:2013  35pages
 
DIN EN ISO 11252 2014.02.01 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)  21pages
 
DIN EN ISO 148-1 Beiblatt 1 2014.02.01 Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces  6pages
 
DIN EN ISO 10581 2014.02.01 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specification (ISO 10581:2011)  14pages
 
DIN EN 303213-6-1 2014.02.01 Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 6: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for deployed surface movement radar sensors - Sub-part 1: X-band sensors usin 2pages
 
DIN EN 302636-2 2014.02.01 Intelligent Transport Systems (ITS) - Vehicular Communications - GeoNetworking - Part 2: Scenarios (Endorsement of the English version EN 302 636-2 V1.2.1 (2013-11) as German standard)  2pages
 
DIN EN 301908-14 2014.02.01 IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) (Endorsement of the English version EN 301 90 2pages
 
DIN EN 301908-13 2014.02.01 IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) (Endorsement of the English version EN 301 9 2pages
 
DIN EN 16254 2014.02.01 Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements; German version EN 16254:2013  22pages
 
DIN EN 16401 2014.02.01 Chemicals used for treatment of swimming pool water - Sodium chloride used for electrochlorinator systems; German version EN 16401:2013  14pages
 
DIN EN 16319 2014.02.01 Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution; German version EN 16319:2013  18pages
 
DIN EN 16254 2014.02.01 Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements  22pages
 
DIN EN 301908-2 2014.02.01 IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) (Endorsement of the English version EN 301 908-2 V6.2.1 (2013-10) a 2pages
 
DIN EN ISO 4892-3 2014.02.01 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2013)  20pages
 

分享到:
或许你还对下面的文章感兴趣
最新文章
最热关注
本月排行
Copyright 2000-2016 标准信息网. Some Rights Reserved | DESIGN BY [A]