ISO国际标准中文翻译查询2
发布-leeglee | 查看- | 发表时间-2011/4/26
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)
ISO 814:2007 | Rubber,vulcanized or thermoplastic—Determination of adhesion to metal—Two-plate method硫化橡胶或热塑性橡胶 与金属粘合强度的测定 二板法 标准中文翻译 |
ISO 979:1974 | Sodium hydroxide for chemical fiber—Determination method of mass fraction化纤用氢氧化钠含量的测定方法(甲法) 标准中文翻译 |
ISO 3197:1975 | Sodium hydroxide for chemical fiber use—Determination of sodium chloride content—Spectrometric method化纤用氢氧化钠中氯化钠含量的测定 分光光度法 标准中文翻译 |
ISO 6840-1982 | Cationic surface active agents (hydrochlorides and hydrobromides)—Determination of critical micellization concentration—Method by measurement of counter ion activity阳离子表面活性剂(氢氯化物和氢溴化物)临界胶束浓度的测定 反离子活度测量法 标准中文翻译 |
ISO 4320-1977 | Surface active agents—Non-ionic surface active agents—Determination of cloud point index (water number)—Volumetric method表面活性剂 非离子表面活性剂 浊点指数(水数)的测定 容量法 标准中文翻译 |
ISO 4343:2000 | Industrial automation systems—Numerical control of machines—NC processor output—Post processor commands工业自动化系统 机床数值控制 NC处理器输出 后置处理命令 标准中文翻译 |
ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines—Measurements on rotating shafts and evaluation criteria—Part 1:General guidelines旋转机械转轴径向振动的测量和评定 第1部分:总则 标准中文翻译 |
ISO 7919-5:1997 | Mechanical vibration of non-reciprocating machines—Measurements on rotating shafts and evaluation criteria—Part 5:Machine sets in hydraulic power generating and pumping plants旋转机械转轴径向振动的测量和评定 第5部分:水力发电厂和泵站机组 标准中文翻译 |
ISO 7919-5:2005 | Mechanical vibration—Evaluation of machine vibration by measurements on rotating shafts—Part 5:Machine sets in hydraulic power generating and pumping plants旋转机械转轴径向振动的测量和评定 第5部分:水力发电厂和泵站机组 标准中文翻译 |
ISO 7626-1:1986 | Vibration and shock—Experimental determination of mechanical mobility—Part 1:Basic definitions and transducers振动与冲击 机械导纳的试验确定 第1部分:本定义与传感器 标准中文翻译 |
ISO 7626-2:1990 | Vibration and shock—Experimental determination of mechanical mobility—Part 2:Measurements using single-point translation excitation with an attached vibration exciter振动与冲击 机械导纳的试验确定 第2部分:用激振器作单点平动激励测量 标准中文翻译 |
ISO 7626-5:1994 | Vibration and shock—Experimental determination of mechanical mobility—Part 3:Measurement using impact excitation振动与冲击 机械导纳的试验确定 第3部分:冲击激励法 标准中文翻译 |
ISO 5292-1980 | V-belt drives—Calculation of power ratingsV带传动 额定功率的计算 标准中文翻译 |
ISO 4543:1981,IDT | Metallic and other inorganic coatings—General rules for corrosion tests applicable for storage conditions金属和其他无机覆盖层储存条件下腐蚀试验的一般规则 标准中文翻译 |
ISO 4518:1980 | Metallic coatings—Measurement of costing thickness—Profilometric method金属覆盖层 覆盖层厚度测量 轮廓仪法 标准中文翻译 |
ISO 6158:2004 | Metallic coatings—Electroplated coatings of chromium for engineering purposes金属覆盖层 工程用铬电镀层 标准中文翻译 |
ISO 4873-1986 | Information processing-8-bit code for information interchange—Structure and rules for implementation信息处理 信息交换用八位代码结构和编码规则 标准中文翻译 |
ISO 2747:1998 | Vitreous and porcelain enamels—Enamelled cooking utensils—Determination of resistance to thermal shock搪瓷炊具 耐温急变性测定方法 标准中文翻译 |
ISO 3293:1975 | Morse taper shank countersinks for angles 60° and 90°,120°inclusive60°、90°、120°莫氏锥柄锥面锪钻 标准中文翻译 |
ISO 6624-2:2003 | Internal combustion engines—Piston rings—Part 11:Half keystone rings made of cast iron内燃机 活塞环 第11部分:楔形铸铁环 标准中文翻译 |
ISO 6621-4:2003 | Internal combustion engines—Piston rings—Part 1:General specifications内燃机 活塞环 第1部分:通用规则 标准中文翻译 |
ISO 6625:1986 | Internal combustion engines—Piston rings—Part 13:Oil control rings内燃机 活塞环 第13部分:油环 标准中文翻译 |
ISO 6626:1989 | Internal combustion engines—Piston rings—Part 14:Coil-spring-loaded oil control rings内燃机 活塞环 第14部分:螺旋撑簧油环 标准中文翻译 |
ISO 6621-1:2007 | Internal combustion engines—Piston rings—Part 2:Vocabulary内燃机 活塞环 第2部分:术语 标准中文翻译 |
ISO 6621-3:2000 | Internal combustion engines—Piston rings—Part 3:Material specifications内燃机 活塞环 第3部分:材料规范 标准中文翻译 |
ISO 6621-5:2005 | Internal combustion engines—Piston rings—Part 4:Quality requirements内燃机 活塞环 第4部分:质量要求 标准中文翻译 |
ISO 6621-2:2003 | Internal combustion engines—Piston rings—Part 5:Inspection measuring principles内燃机 活塞环 第5部分:检验方法 标准中文翻译 |
ISO 6623:2004 | Internal combustion engines—Piston rings—Part 6:Scraper rings made of cast iron内燃机 活塞环 第6部分:铸铁刮环 标准中文翻译 |
ISO 6622-1:2003 | Internal combustion engines—Piston rings—Part 7:Rectangular rings made of cast iron内燃机 活塞环 第7部分:矩形铸铁环 标准中文翻译 |
ISO 6622-2:2003 | Internal combustion engines—Piston rings—Part 8:Rectangular rings made of steel内燃机 活塞环 第8部分:矩形钢环 标准中文翻译 |
ISO 6624-1:2001 | Internal combustion engines—Piston rings—Part 9:Keystone rings made of cast iron内燃机 活塞环 第9部分:梯形铸铁环 标准中文翻译 |
ISO 5-2:2001 | Photography—Density measurement—Part 2:Geometric conditions for transmission density摄影 密度测量 第2部分:透射密度的几何条件 标准中文翻译 |
ISO 5-3:1995 | Photography—Density measurement—Part 3:Spectral conditions摄影 密度测量 第3部分:光谱条件 标准中文翻译 |
ISO 7609:1985 | Essential oil—Analysis by gas chromatography on capillary columns—General method精油 毛细管柱气相色谱分析 通用法 标准中文翻译 |
ISO 7359:1985 | Fragrance/Flavor substances—Analysis by gas chromatography on packed columns—General method香料 填充柱气相色谱分析 通用法 标准中文翻译 |
ISO 899-1:2003 | Plastic—Determination of creep behaviour—Part 1:Tensile creep塑料 蠕变性能的测定 第1部分:拉伸蠕变 标准中文翻译 |
ISO 899-1981 | Plastics—Determination of tensile creep塑料拉伸蠕变测定方法 标准中文翻译 |
ISO 8099:2000 | Small craft—Toilet waste retention systems小艇 厕所废水集存系统 标准中文翻译 |
ISO 4566:1992 | Small craft with inboard engine—Propeller shaft ends and bosses with 1:10 taper舷内机小艇 锥度为1:10的螺旋桨轴端和桨毂 标准中文翻译 |
ISO 8665:1994 | Small craft—Marine propulsion engines and systems—Power measurements and declarations小艇 船用推进发动机和推进装置 功率的测定和标定 标准中文翻译 |
ISO 8665:2006 | Small craft—Marine propulsion reciprocating internal combustion engines—Power measurements and declarations小艇 船用推进往复式内燃机 功率的测定和标定 标准中文翻译 |
ISO 9239-1:2002 | Reaction to fire tests for floorings—Determination of the burning behaviour using a radiant heat source铺地材料的燃烧性能测定 辐射热源法 标准中文翻译 |
ISO 1101:2004 | Geometrical Product Specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out产品几何技术规范(GPS) 几何公差 形状、方向、位置和跳动公差标注 标准中文翻译 |
ISO 2398:1995 | Rubber hoses, textile-reinforced, for compressed air—Specification压缩空气用织物增强橡胶软管 标准中文翻译 |
ISO 5814:1984 | Water quality—Determination of dissolved oxygen—Electrochemical probe method水质 溶解氧的测定 电化学探头法 标准中文翻译 |
ISO 9101-1987 | Surface active agents—Determination of interfacial tension—Drop volume method表面活性剂 界面张力的测定 滴体积法 标准中文翻译 |
ISO 3167:2002 | Plastic—Multipurpose test specimens塑料 多用途试样 标准中文翻译 |
ISO 1163-1:1995 | Plastics—Unplasticized poly(vinyl chloride)(PVC-U) moulding and extrusion materials—Part 1:Designation system and basis for specifications塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分:命名系统和分类基础 标准中文翻译 |
ISO 1163-2:1995 | Plastics—Unplasticized poly(vinyl chloride)(PVC-U) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分:试样制备和性能测定 标准中文翻译 |
ISO 307:2007 | Plastics—Polyamides—Part 1:Determination of viscosity number塑料 聚酰胺 第1部分:黏数测定 标准中文翻译 |
ISO 15023-1:2001 | Plastics—Poly(vinyl alcohol)(PVAL) materials—Part 1:Designation system and basis for specifications塑料 聚乙烯醇(PVAL)材料 第1部分:命名系统和分类基础 标准中文翻译 |
ISO 11501:1995 | Plastics—Film and sheeting—Determination of dimensional change on heating塑料 薄膜和薄片 加热尺寸变化率试验方法 标准中文翻译 |
ISO 1073/1-1976 | Alphanumeric character sets for optical recognition—Part 1:Character set OCR-A—Shapes and dimensions of the printed image光学识别用字母数字字符集 第一部分:OCR-A字符集印刷图象的形状和尺寸 标准中文翻译 |
ISO 4341-1978 | Information processing—Magnetic tape cassette and cartridge labelling and file structure for information interchange信息处理 信息交换用的盒式磁带和卡式磁带的标号和文卷结构 标准中文翻译 |
ISO 6548(1984) | Data processing—Description of interface between process computing system and technical process数据处理 过程计算系统和技术过程之间接口的说明 标准中文翻译 |
ISO 9513:1999 | Calibration of extensometers used in uniaxial testing单轴试验用引伸计的标定 标准中文翻译 |
ISO 4037-1:1996 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 1:Radiation characteristics and production methods用于校准剂量仪和剂量率仪及确定其能量响应的X和Υ参考辐射 第1部分:辐射特性及产生方法 标准中文翻译 |
ISO 4037-2:1997 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy—Part 2:Dosimetry for radiation protection over the energy ranges 8keV to 1.3 MeV and 4MeV to 9MeV用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第2部分:辐射防护用的能量范围为8keV~1.3MeV和4MeV~9MeV的参考辐射的剂量测定 标准中文翻译 |
ISO 4037-3:1999 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy—Part 3:Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第3部分:场所剂量仪和个人剂量计的校准及其能量响应和角响应的测定 标准中文翻译 |
ISO 4037-4:2004 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy—Part 4:Calibration of area and personal dosemeters in low energy X reference radiation fields用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分:低能X射线参考辐射场中场所和个人剂量仪的校准 标准中文翻译 |
ISO 6980-1:2006 | Reference beta radiations—Part 1:Methods of productionβ参考辐射 第1部分:产生方法 标准中文翻译 |
ISO 3592-78 | Numerical control of machines—NC processor output— Logical structure数子控制机床的数控处理程序输出 逻辑结构 标准中文翻译 |
ISO 3592:2000 | Industrial automation systems—Numerical control of machines—NC processor output—File structure and language format工业自动化系统 机床数值控制 NC处理器输出 文件结构和语言格式 标准中文翻译 |
ISO 1004-1977 | Information processing—Magnetic ink character recognition—Print specifications信息处理 磁墨水字符识别 印刷规范 标准中文翻译 |
ISO 1004:1995 | Information processing—Magnetic ink character recognition—Print specifications信息处理 磁墨字符识别 印制规范 标准中文翻译 |
ISO 5209-1977 | General purpose industrial valves—Marking通用阀门 标志 标准中文翻译 |
ISO 6704-1982 | Automatic steam traps—Classification蒸汽疏水阀 分类 标准中文翻译 |
ISO 8587:2006 | Sensory analysis—Methodology—Ranking感官分析 方法学 排序法 标准中文翻译 |
ISO 4526:2004 | Metallic coatings—Electroplated coatings of nickel for engineering purposes金属覆盖层 工程用镍电镀层 标准中文翻译 |
ISO 2064:1996 | Metallic and other inorganic coatings—Definitions and conventions concerning the measurement of thickness金属和其他非有机覆盖层 关于厚度测量的定义和一般规则 标准中文翻译 |
ISO 5801:1997 | Industrial fans—Performance testing using standardized airways工业通风机 用标准化风道进行性能试验 标准中文翻译 |
ISO 4217:1995 | Codes for the representation of currencies and funds表示货币和资金的代码 标准中文翻译 |
ISO 4217:2001 | Codes for the representation of currencies and funds表示货币和资金的代码 标准中文翻译 |
ISO 14602:1998 | Non-active surgical implants—Osteosynthesis and joint replacement implants—Part 1:Particular requirements for osteosynthesis implants无源外科植入物 骨接合与关节置换植入物 第1部分:骨接合植入物特殊要求 标准中文翻译 |
ISO 21534:2002 | Non-active surgical implants—Osteosynthesis and joint replacement implants—Part 2:Particular requirements for joint replacement implants无源外科植入物 骨接合与关节置换植入物 第2部分:关节置换植入物特殊要求 标准中文翻译 |
ISO 606:2004 | Short-pitch transmission precision roller and bush chains,attachments and associated chain sprockets传动用短节距精密滚子链、套筒链、附件和链轮 标准中文翻译 |
ISO 8072-1986 | Information processing systems—Open systems interconnection—Transport service definition信息处理系统 开放系统互连 运输服务定义 标准中文翻译 |
ISO 4646:1989 | Rubber or plastics coated fabrics—Low-temperature impact test橡胶或塑料涂覆织物 低温冲击试验 标准中文翻译 |
ISO 4646:1989 | Rubber-or plastics-coated fabrics—Low-temperature impact test橡胶或塑料涂覆织物 低温冲击试验 标准中文翻译 |
ISO 6179:1998 | Rubber,vulcanized or thermoplastic—Rubber sheet and rubber-coated fabric—Determination rate of volatile liquids(gravimetic technique)硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定(质量法) 标准中文翻译 |
ISO 7854:1995 | Rubber-or plastics-coated fabrics—Determination of resistance to damage by flexing橡胶或塑料涂覆织物 耐屈挠破坏性的测定 标准中文翻译 |
ISO 5473:1997 | Rubber-or plastics-coated fabrics—Determination of crush resistance橡胶或塑料涂覆织物 抗压裂性的测定 标准中文翻译 |
ISO 6451:1982 | Plastics coated fabrics—Polyvinyl chloride Coatings—Rapid method for checking fusion塑料涂覆织物 聚氯乙烯涂覆层 融合程度快速检验法 标准中文翻译 |
ISO 4525-85 | Metallic coatings—Electroplated coatings of copper plus nickel plus chromium on plastics materials金属覆盖层 塑料上铜+镍+铬电镀层 标准中文翻译 |
ISO 4525:2003 | Metallic coatings—Electroplated coatings of nickel plus chromium on plastics materials金属覆盖层 塑料上镍+铬电镀层 标准中文翻译 |
ISO 5577:2000 | Non-destructive testing—Terminology—Terms used in ultrasonic testing无损检测 术语 超声检测 标准中文翻译 |
ISO 5576:1997 | Non-destructive testing—Terminology—Terms used in radiographic testing无损检测 术语 射线照相检测 标准中文翻译 |
ISO 12706:2000 | Non-destructive testing—Terminology—Terms used in penetrant testing无损检测 术语 渗透检测 标准中文翻译 |
ISO 12716:2001 | Non-destructive testing—Terminology—Terms used in acoustic emisson testing无损检测 术语 声发射检测 标准中文翻译 |
ISO 4519-80 | Electrodeposited metallic coatings and related finishes—Sampling procedures for inspection by attributes电沉积金属覆盖层和有关精饰计数抽样检查程序 标准中文翻译 |
ISO 4519:1980 | Electrodeposited metallic coatings and related finishes—Sampling procedures for inspection by attributes电沉积金属覆盖层和相关精饰计数检验抽样程序 标准中文翻译 |
ISO 3547-1:1999 | Plain bearings—Wrapped bushes—Part 1:Dimensions滑动轴承 卷制轴套 第1部分:尺寸 标准中文翻译 |
ISO 3547-2:1999 | Plain bearings—Wrapped bushes—Part 2:Test data for outside and inside diameter滑动轴承 卷制轴套 第2部分:外径和内径的检测数据 标准中文翻译 |
ISO 3547-3:1999 | Plain bearings—Wrapped bushes—Part 3:Lubrication holes,lubrication grooves and lubrication indentations滑动轴承 卷制轴套 第3部分:润滑油孔、润滑油槽和润滑油穴 标准中文翻译 |
ISO 3547-4:1999 | Plain bearings—Wrapped bushes—Part 4:Materials滑动轴承 卷制轴套 第4部分:材料 标准中文翻译 |
ISO 9425-89 | Hard fibreboard—Determination of moisture content硬质纤维板 含水率的测定 标准中文翻译 |
ISO 3119-1976 | Boric acid for industrial use—Determination of chromium content工业硼酸 铬含量的测定 标准中文翻译 |
ISO 5932-1980 | Boric acid for industrial use—Determination of cobalt content工业硼酸 钴含量的测定 标准中文翻译 |
ISO 1918-1972 | Boric acid for industrial use—Determination of sulphate content by reduction and titrimetry工业硼酸 硫酸盐含量的测定 还原滴定法 标准中文翻译 |
ISO 2214-1972 | Boric acid for industrial use—Determination of manganese content工业硼酸 锰含量的测定 标准中文翻译 |
或许你还对下面的文章感兴趣
- ISO国际标准中文翻译查询1(2011-4-26 11:11:10)
- ISO国际标准中文翻译查询(2011-4-26 11:0:13)
- iso 技术标准中文目录(2010-10-23 16:46:59)
- ISO标准目录 3(2010-6-28 10:53:23)
- ISO标准目录 2(2010-6-28 10:10:12)
- ISO标准数据库(2010-6-28 10:6:43)