ISO标准中文翻译目录
发布-leeglee | 查看- | 发表时间-2011/4/29
说明：网站上所展示的为部分标准中文翻译目录，如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)
| ISO/IEC 2382-7:2000 | Information technology—Vocabulary Part 7:Computer programming信息技术 词汇 第7部分：计算机编程 标准中文翻译 |
| ISO/IEC 2382-8:1998 | Information technology—Vocabulary—Part 8:Security信息技术 词汇 第8部分：安全 标准中文翻译 |
| ISO 6142:2001 | Gas analysis—Preparation of calibration gas mixtures—Gravimetric method气体分析 校准用混合气体的制备 称量法 标准中文翻译 |
| ISO 6145-10:2002 | Gas analysis—Preparation of calibration gas mixtures using dynamic volumetric methods—Part 10:Permeation method气体分析 动态体积法制备校准用混合气体 第10部分：渗透法 标准中文翻译 |
| ISO 6349:1979 | Gas analysis—Preparation of calibration gas mixtures—Permeation method分析气体 校准用混合气体的制备 渗透法 标准中文翻译 |
| ISO 7378-1983 | Fasteners—Split pin holes and wireholes紧固件 开口销孔和金属丝孔 标准中文翻译 |
| ISO 7721-2:1990 | Countersunk flat head screws—Part 2:Penetration depth of cross recesses沉头螺钉 第2部分：十字槽插入深度 标准中文翻译 |
| ISO 7721-1983 | Countersunk head screws—Head configuration and gauging沉头螺钉 头部形状和测量 标准中文翻译 |
| ISO 1478:1999 | Tapping screws thread自攻螺钉用螺纹 标准中文翻译 |
| ISO 37:2005 | Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶 拉伸应力应变性能的测定 标准中文翻译 |
| ISO 887:2000 | Plain washers for bolts,screws and nuts—General plan螺栓、螺钉和螺母用平垫圈 总方案 标准中文翻译 |
| ISO 4703:2001 | Slideways grinding machines with two columns—Testing of the accuracy龙门导轨磨床 精度检验 标准中文翻译 |
| ISO 11090-2:1998 | Die sinking electro-discharge machines(EDM)——Testing of accuracy——Part 2:Two column machines(Slide-head type and cross-slide table type)电火花成形机 精度检验 第2部分：双立柱机床(移动主轴头型和十字工作台型) 标准中文翻译 |
| ISO 7619-1:2004 | Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分：邵氏硬度计法(邵尔硬度) 标准中文翻译 |
| ISO 7619-2:2004 | Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 2:IRHD pocket meter method硫化橡胶或热塑性橡胶 压入硬度试验方法 第2部分：便携式橡胶国际硬度计法 标准中文翻译 |
| ISO 7619:1986 | Rubber—Determination of indentation hardness by means of pocket hardness meters橡胶袖珍硬度计压入硬度试验方法 标准中文翻译 |
| ISO 5754-1980 | Sintered metals materials, excluding hardmetals—Unnotched impact test piece烧结金属材料(不包括硬质合金) 无切口冲击试样 标准中文翻译 |
| ISO 3325:1996 | Sintered metal materials, excluding hardmetals—Determination of transverse rupture strength烧结金属材料(不包括硬质合金) 横向断裂强度的测定 标准中文翻译 |
| ISO 36:1993 | Rubber,vulcanized or thermoplastic—Determination of adhesion to textile fabric硫化橡胶或热塑性橡胶与织物粘合强度的测定 标准中文翻译 |
| ISO 36:2005 | Rubber,vulcanized or thermoplastic—Determination of adhesion to textile fabric硫化橡胶或热塑性橡胶与织物粘合强度的测定 标准中文翻译 |
| ISO 862-1984 | Surface active agents—Terms表面活性剂名词术语 标准中文翻译 |
| ISO 862:1984 | Surface active agents—Terms表面活性剂 术语 标准中文翻译 |
| ISO 2131-1972 | Surface active agents—Simplified classification表面活性剂简化分类 标准中文翻译 |
| ISO 2781:2007 | Rubber,vulcanized or thermoplastic—Determination of density硫化橡胶或热塑性橡胶 密度的测定 标准中文翻译 |
| ISO 3803-1976 | Automobile hydraulic pressure test connection for braking equipment汽车制动装置液压试验的连接器 标准中文翻译 |
| ISO 1496-1:1990 | Series 1 freight containers—Specification and testing—Part 1:General cargo containers for general purposes系列1集装箱 技术要求和试验方法 第1部分：通用集装箱 标准中文翻译 |
| ISO 4119:1995 | Pulps—Determination of stock concentration纸浆 浆料浓度的测定 标准中文翻译 |
| ISO 692:1982 | Pulps—Determination of alkali solubility纸浆 碱溶解度的测定 标准中文翻译 |
| ISO 94:1982 | Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames纺织机械与附件 环锭细纱机和环锭捻线机 锭距 标准中文翻译 |
| ISO 1182:1990 | Non-combustibility test method of building materials建筑材料不燃性试验方法 标准中文翻译 |
| ISO 1182:2002 | Non-combustibility test method for building materials建筑材料不燃性试验方法 标准中文翻译 |
| ISO 295:2004 | Plastics—Compression moulding of test specimens of thermosetting materials塑料 热固性塑料试样的压塑 标准中文翻译 |
| ISO 9352:1995 | Plastics—Test method for wear by rolling塑料 滚动磨损试验方法 标准中文翻译 |
| ISO 21415-2:2006 | Wheat and wheat flour—Gluten content—Part 2:Determination of wet gluten by mechanical means小麦和小麦粉 面筋含量 第2部分：仪器法测定湿面筋 标准中文翻译 |
| ISO 21415-3:2006 | Wheat and wheat flour—Gluten content—Part 3:Determination of dry gluten from wet gluten by an oven drying method小麦和小麦粉 面筋含量 第3部分：烘箱干燥法测定干面筋 标准中文翻译 |
| ISO 21415-4:2006 | Wheat and wheat flour—Gluten content—Part 4:Determination of dry gluten from wet gluten by a rapid drying method小麦和小麦粉 面筋含量 第4部分：快速干燥法测定干面筋 标准中文翻译 |
| ISO 20483:2006 | Cereals and pulses—Determination of the nitrogen content and calculation of the crude protein content—Kjeldahl method谷物和豆类 氮含量测定和粗蛋白质含量计算 凯氏法 标准中文翻译 |
| ISO 6865:2000 | Inspection of grain and oils—Determination of crude fibre content in grain—Method with intermediate filtration粮油检验 粮食中粗纤维素含量测定 介质过滤法 标准中文翻译 |
| ISO 5555:2001 | Animal and vegetable fats and oils—Sampling动植物油脂 扦样 标准中文翻译 |
| ISO 6320:2000 | Animal and vegetable fats and oils—Determination of refractive index动植物油脂 折光指数的测定 标准中文翻译 |
| ISO 662:1998 | Animal and vegetable fats and oils—Determination of moisture and volatile matter content动植物油脂 水分及挥发物含量测定 标准中文翻译 |
| ISO 660:1996 | Animal and vegetable fats and oils—Determination of acid value and acidity动植物油脂 酸值和酸度测定 标准中文翻译 |
| ISO 3657:1988 | Animal and vegetable oils and fats—Determination of saponification value动植物油脂皂化值的测定 标准中文翻译 |
| ISO 3596:2000 | Animal and vegetable fats and oils—Determination of unsaponifiable matter—Part 1:Method using diethyl ether extraction动植物油脂 不皂化物测定 第1部分：乙醚提取法 标准中文翻译 |
| ISO 18609:2000 | Animal and vegetable fats and oils—Determination of unsaponifiable matter—Part 2:Method using hexane extraction动植物油脂 不皂化物测定 第2部分：己烷提取法 标准中文翻译 |
| ISO 3960:2001 | Animal and vegetable fats and oils—Determination of peroxide value动植物油脂 过氧化值测定 标准中文翻译 |
| ISO 2268:1972 | Nonionic surface active agents—Determination of polyethylene glycols and non-ionic active matter(adducts)—Weilbull method非离子表面活性剂 聚乙二醇含量和非离子活性物(加成物)含量的测定 Weilbull法 标准中文翻译 |
| ISO 1402: 1994 | Rubber and plastics hoses and hose assemblies—Hydrostatic testing橡胶和塑料软管及软管组合件 静液压试验方法 标准中文翻译 |
| ISO 4672:1997 | Rubber and plastics hoses—Subambient temperature flexibility tests橡胶和塑料软管 低温曲挠试验 标准中文翻译 |
| ISO 1746:1998 | Rubber or plastics hoses and tubing—Bending tests橡胶或塑料增强软管和非增强软管 弯曲试验 标准中文翻译 |
| ISO 7233:1991 | Rubber and plastics hoses and hose assemblies—Determination of suction resistance橡胶和塑料软管及软管组合件 耐吸扁性能的测定 标准中文翻译 |
| ISO 6803:1994 | Rubber or plastics hoses and hose assemblies—Hydraulic impulse test without flexing橡胶或塑料软管及软管组合件 无挠曲液压脉冲试验 标准中文翻译 |
| ISO 1629:1995 | Rubbers and latices—Nomenclature橡胶和胶乳 命名法 标准中文翻译 |
| ISO 611:1994 | Road vehicles—Braking of automotive vehicles and their trailers—Vocabulary道路车辆 汽车和挂车 制动名词术语及其定义 标准中文翻译 |
| ISO 5199:2002 | Technical specification for centrifugal pumps—ClassⅡ离心泵 技术条件(Ⅱ类) 标准中文翻译 |
| ISO 3661-77 | End-suction centrifugal pumps—Baseplate and installation dimensions轴向吸入离心泵底座尺寸和安装尺寸 标准中文翻译 |
| ISO 3069-1974 | End-suction centrifugal pumps—Dimensions of cavities for mechanical seals and for soft packing轴向吸入离心泵机械密封和软填料用的空腔尺寸 标准中文翻译 |
| ISO 2858-75 | End-suction centrifugalpumps (rating 16 bar)—Designation, nominal duty point and dimensions轴向吸入离心泵(16bar) 标记、性能和尺寸 标准中文翻译 |
| ISO 4993:1987 | Radiographic testing for steel castings铸钢件射线照相检测 标准中文翻译 |
| ISO 7590:2001 | Steel cord conveyor belts—Methods for the determination of total thickness and cover thickness钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法 标准中文翻译 |
| ISO 7622-2:1984 | Steel cord conveyor belts—Longitudinal traction test—Part 2:Measurement of tensile strength钢丝绳芯输送带 纵向拉伸试验 第2部分：拉伸强度的测定 标准中文翻译 |
| ISO 6157-1:1988 | Fasteners—Surface discontinuities—Bolts,screws and studs for general requirements紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求 标准中文翻译 |
| ISO 6157-2:1995 | Fasteners—Surface discontinuities—Nuts紧固件表面缺陷 螺母 标准中文翻译 |
| ISO 6157-3:1988 | Fasteners—Surface discontinuities—Bolts,screws and studs for special requirements紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求 标准中文翻译 |
| ISO 3512:1992 | Heavy-duty cranked-link transmission roller chains and chain wheels重载传动用弯板滚子链和链轮 标准中文翻译 |
| ISO 7241-1:1987 | Hydraulic fluid power—Quick-action couplings Dimensions and requirements液压快换接头 尺寸和要求 标准中文翻译 |
| ISO 7241-2:2000 | Hydraulic fluid power—Quick action couplings—Test methods液压快换接头 试验方法 标准中文翻译 |
| ISO 5675:1992 | Agricultural tractors and machinery—General purpose quick-action hydraulic couplers农用拖拉机和机具 通用液压快换接头 标准中文翻译 |
| ISO 15744:2002 | Hand-held non-electric power tools—Noise measurement code—Engineering method(grade 2)手持式非电类动力工具 噪声测量方法 工程法(2级) 标准中文翻译 |
| ISO 4310-1981 | Cranes—Test code and procedures起重机试验规范和程序 标准中文翻译 |
| ISO 2416:1992 | Passenger car—Mass distribution轿车 质量分布 标准中文翻译 |
| ISO 4309:1990,IDT | Wire ropes for cranes—Code of practice for examination and discard起重机用钢丝绳检验和报废实用规范 标准中文翻译 |
| ISO 4309:2004 | Cranes—Wire ropes—Care,maintenance,installation,examination and discard起重机 钢丝绳 保养、维护、安装、检验和报废 标准中文翻译 |
| ISO 3918:1996 | Milking machine installations—Vocabulary挤奶设备 词汇 标准中文翻译 |
| ISO 1893:1989 | Refractory products—Determination of Refractoriness-under-load—Differential-with rising temperature耐火制品荷重软化温度试验方法 示差-升温法 标准中文翻译 |
| ISO 1893:2005 | Refractory products—Determination of refractoriness-under-load—Differential method with rising temperature耐火材料 荷重软化温度试验方法 示差升温法 标准中文翻译 |
| ISO 8114:1990 | Textile machinery terminology—Spindles for ring-spinning and doubling machines—List of equivalent terms纺织机械术语 环锭纺纱、捻线锭子 等效术语一览表 标准中文翻译 |
| ISO 7839:1984 | Textile machinery terminology—Classification and vocabulary for knitting machines纺织机械术语 针织机分类和术语 标准中文翻译 |
| ISO 3342:1995 | Test method for glass mats Part 2:Determination of tensile breaking force玻璃纤维毡试验方法 第2部分：拉伸断裂强力的测定 标准中文翻译 |
| ISO 48:1994 | Rubber,vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100IRHD)硫化橡胶或热塑性橡胶硬度的测定(10～100IRHD) 标准中文翻译 |
| ISO 1432:1988 | Rubber,vulcanized or thermoplastic—Determination of low temperature stiffening(Gehman test)硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验) 标准中文翻译 |
| ISO 3274:1996 | Geometrical Product Specifications (GPS)—Surface texture:Profile method—Nominal characteristic of contact (stylus) instruments产品几何技术规范(GPS)表面结构轮廓法接触(触针)式仪器的标称特性 标准中文翻译 |
| ISO 3046-1:1995 | Reciprocating internal combustion engines—Performance—Part 1:Standard reference conditions,declarations of power,fuel and lubricating oil consumptions,and test methods往复式内燃机 性能 第1部分：标准基准状况, 功率、燃料消耗和机油消耗的标定及试验方法 标准中文翻译 |
| ISO 3046-1:2002 | Reciprocating internal combustion engines—Performance—Part 1:Declarations of power,fuel and lubricating oil consumptions and test methods—Additional requirements for engines for general use往复式内燃机 性能 第1部分：功率、燃料消耗和机油消耗的标定及试验方法通用发动机的附加要求 标准中文翻译 |
| ISO 3046-3:1989 | Reciprocating internal combustion engines—Performance—Part 3:Test measurements往复式内燃机 性能 第3部分：试验测量 标准中文翻译 |
| ISO 3046-3:2006 | Reciprocating internal combustion engines—Performance—Part3:Test measurements往复式内燃机 性能 第3部分：试验测量 标准中文翻译 |
| ISO 3046-4:1997 | Reciprocating internal combustion engines—Performance—Part 4:Speed governing往复式内燃机 性能 第4部分：调速 标准中文翻译 |
| ISO 3046-5:2001 | Reciprocating internal combustion engines—Performance—Part 5:Torsional vibrations往复式内燃机性能 第5部分：扭转振动 标准中文翻译 |
| ISO 3046-6:1990 | Reciprocating internal combustion engines—Performance—Part 6:Overspeed protection往复式内燃机 性能 第6部分：超速保护 标准中文翻译 |
| ISO 3046-7:1995 | Reciprocating internal combustion engines—Performance—Part 7:Codes for engine power往复式内燃机 性能 第7部分：发动机功率代号 标准中文翻译 |
| ISO 4347:2004 | Leaf chains, clevises and sheaves—Dimensions, measuring forces and tensile strengths板式链、连接环和槽轮 尺寸、测量力和抗拉强度 标准中文翻译 |
| ISO 10816-1:1995 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 1:General guidelines在非旋转部件上测量和评价机器的机械振动 第1部分：总则 标准中文翻译 |
| ISO 10816-2:1996 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 2:Large land-based steam turbine generator sets in excess of 50MW在非旋转部件上测量和评价机器的机械振动 第2部分：50MW以上陆地安装的大型汽轮发电机组 标准中文翻译 |
| ISO 10816-2:2001 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 2:Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min,1 800 r/min,3 000 r/min and 3 600 r/min在非旋转部件上测量和评价机器的机械振动 第2部分：50MW以上,额定转速1500r/min、1800r/min、3000r/min、3600r/min陆地安装的汽轮机和发电机 标准中文翻译 |
| ISO 10816-3:1998 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ在非旋转部件上测量和评价机器的机械振动 第3部分：额定功率大于15kW额定转速在120r/min至15000r/min之间的在现场测量的工业机器 标准中文翻译 |
| ISO 10816-4:1998 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 4:Gas turbine driven sets excluding aircraft derivatives在非旋转部件上测量和评价机器的机械振动 第4部分：不包括航空器类的燃气轮机驱动装置 标准中文翻译 |
| ISO 10816-5:2000 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 5:Machine sets in hydraulic power generating and pumping plants在非旋转部件上测量和评价机器的机械振动 第5部分：水力发电厂和泵站机组 标准中文翻译 |
| ISO 10816-6:1995 | Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 6:Reciprocating machines with power ratings above 100kW在非旋转部件上测量和评价机器的机械振动 第6部分：功率大于100kW的往复式机器 标准中文翻译 |
| ISO 1395:1977 | Short pitch transmission precision bush chains and chain wheels短节距传动用精密套筒链和链轮 标准中文翻译 |
| ISO 2540:1973 | Centre drills—Part 2:Centre drills for centre holes with protecting chamfers—Type B—Dimensions中心钻 第2部分：带护锥的中心钻-B型 型式和尺寸 标准中文翻译 |
或许你还对下面的文章感兴趣
- ISO标准中文翻译目录(2011-4-29 16:1:57)
- ISO标准中文翻译目录(2011-4-29 16:1:1)
- ISO标准中文翻译目录(2011-4-29 16:0:24)
- ISO标准中文翻译目录(2011-4-29 15:59:36)
- ISO标准中文翻译目录(2011-4-29 15:58:51)
- ISO标准中文翻译目录(2011-4-29 15:58:13)
- ISO标准中文翻译目录(2011-4-29 15:57:21)
- ISO标准中文翻译目录(2011-4-29 15:56:36)
- ISO标准中文翻译目录(2011-4-29 15:55:54)
- ISO标准中文翻译目录(2011-4-29 15:54:49)
