ansi标准中文版翻译目录查询
发布-leeglee | 查看- | 发表时间-2011/4/22
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)
ANSI/AWS A5.4-92 | Stainless steel covered electrodes不锈钢焊条 标准中文翻译 |
ANSI H35.2-85 | Seamless aluminium cylinder produced by power spinning旋压无缝铝筒 标准中文翻译 |
ANSI/AAMIST8-1982 | Inspecting method for sterilizing effect of automated autoclave sterilizer压力蒸汽灭菌器灭菌效果检验方法 标准中文翻译 |
ANSI/AWS A5.18-79 | Welding wires for gas shielding arc welding of carbon and low alloy steels气体保护电弧焊用碳钢、低合金钢焊丝 标准中文翻译 |
ANSI/AWWA B604-90 | Granular activated carbon from coal for high adsorption performance高效吸附用煤质颗粒活性炭 标准中文翻译 |
ANSI/AWWA B604-90 | Granular activated carbon from coal for the treatment of water净化水用煤质颗粒活性炭 标准中文翻译 |
ANSI/ D1060-80 | Test method for the determination of scoured yield of greasy wool原毛冼净率试验方法 烘箱法 标准中文翻译 |
ANSI/C573-1976 | Fireclay and high-alumina refractories—Determination of titanium dioxide content—Hydrogen peroxide photometric method粘土、高铝质耐火材料化学分析方法 过氧化氢光度法测定二氧化钛量 标准中文翻译 |
ANSI PH4.11-1964 | Method for determining the coating melting point of photographic materials感光材料涂层熔点测定方法 标准中文翻译 |
ANSI/ 52-1976 | The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 标准中文翻译 |
ANSI/ASHRAE55-2004 | Thermal environmental conditions for human occupancy室内热环境条件 标准中文翻译 |
ANSI/IEEE 338-1987 | Periodic tests and monitoring of the safety system of nuclear power plant核电厂安全系统定期试验与监测 标准中文翻译 |
ANSI/ B33-81 | Tinned round copper wire镀锡圆铜线 标准中文翻译 |
ANSI/AWS A5.6-84 | Coated electrodes for copper and copper alloys铜及铜合金焊条 标准中文翻译 |
ANSI H35.2(M)-1993 | Wrought aluminium and aluminium alloy sheets and strips—Tolerances on forms and dimensions铝及铝合金板、带材的尺寸允许偏差 标准中文翻译 |
ANSI/AWWA C511-1997 | Reduced-pressure type backflow preventer减压型倒流防止器 标准中文翻译 |
ANSI_ANSLG C78.43-2007;IEC 61167:1998 | Ceramic metal-halide lamps—Performance specifications陶瓷金属卤化物灯 性能要求 标准中文翻译 |
JIS K 1475:2006;ANSI/A WWA B 408:2003 | Water treatment chemical—Poly aluminium chloride水处理剂 聚氯化铝 标准中文翻译 |
ANSI X3L1-1995-009X | Geo-spatial data transfer format地球空间数据交换格式 标准中文翻译 |
ANSI/ANS-3.8.7:1998 | Criteria for emergency planning and preparedness for nuclear power plants—Part 12:Planning,development,conduct and evaluation of nuclear emergency drills and exercises核电厂应急计划与准备准则 第12部分:核应急练习与演习的计划、准备、实施与评估 标准中文翻译 |
ANSI/ANS 3.8.6:1995 | Criteria for emergency planning and preparedness for nuclear power plants—Part 11:Criteria for the conduct of offsite radiological assessment for emergency response核电厂应急计划与准备准则 第11部分:应急响应时的场外放射评价准则 标准中文翻译 |
ANSI Z400.1:1993 | Safety data sheet for chemical products—Part 2:Detailed rules for drafting化学品安全资料表 第2部分:编写细则 标准中文翻译 |
ANSI B16.5:1981 | Steel pipe fittings for flanged joint钢制法兰管件 标准中文翻译 |
ANSI B 1335-1978 | General specification for lightweight gas turbine electrical equipment轻型燃气轮机电气设备通用技术要求 标准中文翻译 |
ANSI H 35.1-1993 | Temper designation system for wrought aluminium and aluminium alloy变形铝及铝合金状态代号 标准中文翻译 |
ANSI B 133.3 | General requirements for gas turbine auxiliary equipment燃气轮机辅助设备通用技术要求 标准中文翻译 |
ANSI S3.5-1969 | Acoustics—methods for the calculation of the articulation index of speech声学 语言清晰度指数的计算方法 标准中文翻译 |
ANSI PIC 31-1974 | Boiler water treatment equipments—Terminologies锅炉水处理设备术语 标准中文翻译 |
ANSI B16.11 | Forged steel threaded pipe fittings锻钢制螺纹管件 标准中文翻译 |
ANSI B133.3 | Light weight gas turbines preparation for shipping and installation轻型燃气轮机运输与安装 标准中文翻译 |
ANSI B133.3 | General requirements for light weight gas turbine auxiliary equipment轻型燃气轮机辅助设备通用技术要求 标准中文翻译 |
ANSI/ANS-45-1980 | Criteria for accident monitoring instrumentations in nuclear power generating stations Criteria for functions核电厂事故监测仪表准则 功能准则 标准中文翻译 |
ANSI C78.389 | Methods of measuring characteristics for discharge lamps (excluding fluorescent lamps)放电灯(荧光灯除外)特性测量方法 标准中文翻译 |
ANSI/IEEE Std 384:1992 | Criteria for independence of class 1E equipment and circuits in nuclear power plants核电厂安全级电气设备和电路独立性准则 标准中文翻译 |
ANSI/ANS 58.3:1992 | Physical protection for safety-related systems and components in nuclear power plants核电厂安全重要系统和部件的实体防护 标准中文翻译 |
ANSI PH1.42-69 | Test method for comparing colour stabilities of colour photographic images彩色照相影像色稳定性对比试验方法 标准中文翻译 |
ANSI B16.34-81 | General requirements for industrial steel valves钢制阀门 一般要求 标准中文翻译 |
ANSI B212-84 | Clamping and resharpening hard metal (carbide) inserts硬质合金机夹可重磨刀片 标准中文翻译 |
ANSI PH2.40-85 | Method for measuring the root-mean-square (RMS) granularity of photographic materials/process combination感光材料均方根颗粒度测定方法 标准中文翻译 |
ANSI/ D696-79 | Determination for coefficient of linear expansion of plastics塑料线膨胀系数测定方法 标准中文翻译 |
ANSI/ANS 55.4-79 | The technical rules about gaseous radioactive waste processing system for light water reactor plants轻水堆核电厂放射性废气处理系统技术规定 标准中文翻译 |
ANSI/ANS 55.6-79 | The technical rules about radioactive waste processing system for light water reactor plants轻水堆核电厂放射性废液处理系统技术规定 标准中文翻译 |
ANSI/ANS55.1-79 | The technical rules about solid radioactive waste processing system for light water reactor plants轻水堆核电厂放射性固体废物处理系统技术规定 标准中文翻译 |
ANSI/AAMI ST8-82 | Specifications for automated autoclave sterilizer自动控制压力蒸汽灭菌器技术条件 标准中文翻译 |
ANSI/SVIA 1-2007 | Caution symbols for all-terrain vehicles全地形车 警示符号 标准中文翻译 |
DIN 68852-2004;JIS D9456-1994;ANSI/BHMA A 156.2-2003;JIS A 1510-1:2001 | General safety technique requirement of locks锁具安全通用技术条件 标准中文翻译 |
ANSIC78.1375~1379 | Single-end metal-halide lamps(175W~1500W Scl3-Nal Series lamps)单端金属卤化物灯(175W~1500W钪钠系列) 标准中文翻译 |
ANSI/NFPA99:1996 | Technical requirements of fire safety in compression chambers加压舱消防安全技术要求 标准中文翻译 |
ANSI N4.3-10-1984 | Criteria for safe design of wet source storage gamma irradiators水池贮源型γ辐照装置设计安全准则 标准中文翻译 |
JIS K 1475:2006;ANSI/ AWWA B 408:2003 | Poly aluminium chloride for treatment of drinking water生活饮用水用聚氯化铝 标准中文翻译 |
ANSI N13.3-1969 | Dosimetry for criticality accidents核临界事故剂量测定 标准中文翻译 |
ANSI/NFPA 33-1989 | Safety code for painting—safety for electrostatic powder spraying process涂装作业安全规程 粉末静电喷涂工艺安全 标准中文翻译 |
ANSI/ANS-8.19-1984 | Nuclear criticality safety for fissile materials outside reactors—Administrative regulation for nuclear criticality safety反应堆外易裂变材料的核临界安全 核临界安全行政管理规定 标准中文翻译 |
ANSI/SMPTE 241-1995 | Reels for 35 mm motion picture projectors—Dimensions35mm电影放映片夹 尺寸 标准中文翻译 |
ANSI/ASHRAE Standard 28-1996(RA 2006) | Method of testing flow capacity of refrigerant capillary tubes制冷剂毛细管流量的试验方法 标准中文翻译 |
ANSI 127:2001 | Unitary air-condtioners for computer and data processing room计算机和数据处理机房用单元式空气调节机 标准中文翻译 |
ANSI/ C515:2001 | Standard specification for chemical-resistant ceramic tower packings耐化学腐蚀陶瓷塔填料技术条件 标准中文翻译 |
ANSI/ANS-8.5-1996 | Nuclear criticality safety for fissile materials outside reactor—Part 6:Borosilicate glass Raschig rings and its application criteria反应堆外易裂变材料的核临界安全 第6部分:硼硅酸盐玻璃拉希环及其应用准则 标准中文翻译 |
ANSI PH4.35-1972 | Method for determining the resistance of photographic films to abrasion during processing感光胶片冲洗过程中抗划伤力测定方法 标准中文翻译 |
ANSI/AWS A5.13 | Hardfacing electrodes for shielded metal arc welding堆焊焊条 标准中文翻译 |
ANSI/IEEC Std.352:1987 | General principles of reliability analysis for nuclear power plant safety systems核电厂安全系统可靠性分析一般原则 标准中文翻译 |
ANSI/ASHRAE:1997 | Number designation and safety classification of refrigerants制冷剂编号方法和安全性分类 标准中文翻译 |
ANSI PH2.22-78 | Method for determining safety times of darkroom illumination确定暗室照明安全时间的方法 标准中文翻译 |
ANSI/AWS A5.17:1989 | Carbon steel electrodes and fluxs for submerged arc welding埋弧焊用碳钢焊丝和焊剂 标准中文翻译 |
ANSI/AWS A5.5-81 | Low alloy steel covered electrodes低合金钢焊条 标准中文翻译 |
ANSI/AWS A5.1-91 | Carbon steel covered electrodes碳钢焊条 标准中文翻译 |
ANSI/AWWA B501-1993 | Sodium hydroxide for industrial use—Determination of sodium hydroxide and sodium carbonate content工业用氢氧化钠中氢氧化钠和碳酸钠含量的测定 标准中文翻译 |
ANSI/IPC-EG-140:1997 | E-glass fabric woven for printed boards印制板用E玻璃纤维布 标准中文翻译 |
ANSI/AWS A5.22-95 | Stainless steel flux cored wires不锈钢药芯焊丝 标准中文翻译 |
ANSI/ D1769 | Cotton fibre—Determination of linear density—Array method棉纤维 线密度试验方法 排列法 标准中文翻译 |
ANSI/TIA/EIA530-A:1992 | High speed 25-position interface for data terminal equipment and data circuit-terminating equipment,including alternative 26-position connector数据终端设备和数据电路终接设备用的高速25插针接口暨可替换的26插针连接器 标准中文翻译 |
ANSI H35.1-1993 | Wrought aluminium and aluminium alloy—Designation system变形铝及铝合金牌号表示方法 标准中文翻译 |
ANSI/AWS A5.1-91 | Nickel and nickel alloy welding wires镍及镍合金焊丝 标准中文翻译 |
ANSI/ANS 8.5-1986 | Nuclear criticality safety for fissile materials outside reactor—Borosilicate glass Raschig rings and its application criteria反应堆外易裂变材料的核临界安全 硼硅酸盐玻璃拉希环及其应用准则 标准中文翻译 |
ANSI/IEEE Std 384-1992 | Criteria for independence of class IE equipment and circuits in nuclear power plants核电厂安全级电气设备和电路独立性准则 标准中文翻译 |
ANSI/ANS-6.3.1-1987 | Program for testing radiation shields in light water reactors (LWR)轻水堆核电厂辐射屏蔽检测大纲 标准中文翻译 |
ANSI/ C696-1980 | Uranium dioxide powder and pellets—Determination of fluorine-Pyrohydrolysis ion-selective electrode method二氧化铀粉末和芯块中氟的测定 高温水解-离子选择性电极法 标准中文翻译 |
ANSI/AWS A5.20:1995 | Carbon steel flux cored electrodes for arc welding碳钢药芯焊丝 标准中文翻译 |
ANSI/AWS Z49.1 | Safety in welding and cutting焊接与切割安全 标准中文翻译 |
ANSI/ANS 8.6-1983 | Nuclear criticality safety for fissile materials outside reactors—Safety controls in conducting subcritical neutron multiplication measurements in situ反应堆外易裂变材料的核临界安全 次临界中子增殖就地测量安全规定 标准中文翻译 |
ANSI/ANS 8.12-1987 | Nuclear criticality safety for fissile materials outside reactors—Nuclear criticality control criteria and subcritical limits for plutonium-natural uranium mixtures反应堆外易裂变材料的核临界安全 钚-天然铀混合物的核临界控制准则和次临界限值 标准中文翻译 |
ANSI/ANS 8.9-1987 | Nuclear criticality safety for fissile materials outside reactor—Nuclear criticality safety criteria for steel-pipe intersections containing aqueous solutions of fissile material反应堆外易裂变材料的核临界安全 含易裂变物质水溶液的钢质管道交接的核临界安全准则 标准中文翻译 |
ANSI/ANS 8.1-1983 | Nuclear criticality safety for fissile materials outside reactor—Basic technical criteria and subcritical limits for handling, processing and operations of fissile materials反应堆外易裂变材料的核临界安全 易裂变材料操作、加工、处理的基本技术准则与次临界限值 标准中文翻译 |
或许你还对下面的文章感兴趣
- ansi标准中文翻译目录(2011-4-22 18:17:54)
- ANSI标准数据库参考目录 4(2010-6-30 17:3:3)
- ANSI标准数据库参考目录 3(2010-6-30 17:0:44)
- ANSI标准数据库参考目录 2(2010-6-30 16:59:43)
- ANSI标准数据库参考目录 1(2010-6-30 16:58:54)
- ANSI标准数据库参考目录 (2010-6-30 16:57:24)