海量最新、最全国外技术标准原文、中文版速递——>点击
首页 > 英国标准 > 正文

BSI BS 标准数据库标准目录 2014-7-8

发布-leeglee | 查看- | 发表时间-2015/1/19
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)

 

BSI PD IEC/TS 62132-9 2014.09.30 Integrated circuits — Measurement of electromagnetic immunity Part 9: Measurement of radiated immunity — Surface scan method  32pages
 
BSI PD ISO/TR 15144-1 2014.09.30 Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles  46pages
 
BSI PD ISO/TS 17929 2014.09.30 Biomechanical effects on amusement ride passengers  34pages
 
BSI PD 62305-2 2014.09.30 Flash density map 2014 – Supplement to BS EN 62305-2:2012 – Protection against lightning Part 2: Risk management  6pages
 
BSI BS EN ISO 16610-71 2014.09.30 Geometrical product specifications (GPS) — Filtration Part 71: Robust areal filters: Gaussian regression filters  32pages
 
BSI BS EN ISO 18541-3 2014.09.30 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirements  24pages
 
BSI BS EN ISO 18541-2 2014.09.30 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements  42pages
 
BSI BS IEC 62715-1-1 2014.09.30 Flexible display devices Part 1-1: Terminology and letter symbols  14pages
 
BSI BS EN ISO 18541-1 2014.09.30 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) Part 1: General information and use case definition  52pages
 
BSI BS EN ISO 16635-2 2014.09.30 Dentistry — Dental rubber dam instruments Part 2: Clamp forceps  16pages
 
BSI BS EN 61534-22 2014.09.30 Powertrack systems — Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation  28pages
 
BSI BS ISO 1887 2014.09.30 Textile Glass - Determination of Combustible-Matter Content  14pages
 
BSI BS ISO 26623-2 2014.08.31 Polygonal taper interface with flange contact surface Part 2: Dimensions and designation of receivers  14pages
 
BSI BS 8892 2014.08.31 Transition management of facility-related services – Code of Practice  52pages
 
BSI BS ISO 26623-1 2014.08.31 Polygonal taper interface with flange contact surface Part 1: Dimensions and designation of shanks  20pages
 
BSI BS EN 1017 2014.08.31 Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite  20pages
 
BSI BS EN 328 2014.08.31 Heat exchangers — Forced convection unit air coolers for refrigeration — Test procedures for establishing the performance  50pages
 
BSI BS EN 1048 2014.08.31 Heat exchangers — Air cooled liquid coolers (dry coolers) — Test procedures for establishing the performance  22pages
 
BSI BS EN 327 2014.08.31 Heat Exchangers - Forced Convection Air Cooled Refrigerant Condensors - Test Procedure for Establishing Performance  40pages
 
BSI BS EN 694 2014.08.31 Fire-fighting hoses - Semi-rigid hoses for fixed systems  18pages
 
BSI BS EN 81-20 2014.08.31 Safety rules for the construction and installation of lifts — Lifts for the transport of persons and goods Part 20: Passenger and goods passenger lifts  168pages
 
BSI BS EN 2032-001 2014.08.31 Aerospace series — Metallic materials Part 001: Conventional designation  34pages
 
BSI BS IEC 62396-2 2014.08.31 Process management for avionics - Atmospheric radiation effects Part 2: Guidelines for single event effects testing for avionics systems  42pages
 
BSI BS ISO 28560-1 2014.08.31 Information and documentation - RFID in libraries Part 1: Data elements and general guidelines for implementation  40pages
 
BSI BS 5534 2014.08.31 Slating and tiling for pitched roofs and vertical cladding – Code of practice  172pages
 
BSI BS 5499-10 2014.08.31 Guidance for the selection and use of safety signs and fire safety notices  58pages
 
BSI BS 4163 2014.08.31 Health and safety for design and technology in educational and similar establishments – Code of practice  146pages
 
BSI BS ISO 28560-2 2014.08.31 Information and documentation - RFID in libraries Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962  54pages
 
BSI BS ISO 28560-3 2014.08.31 Information and documentation - RFID in libraries Part 3: Fixed length encoding  36pages
 
BSI BS EN ISO 2758 2014.08.31 Paper - Determination of bursting strength  24pages
 
BSI BS EN ISO 3218 2014.08.31 Essential oils - Principles of nomenclature  12pages
 
BSI BS EN 81-50 2014.08.31 Safety rules for the construction and installation of lifts — Examinations and tests Part 50: Design rules, calculations, examinations and tests of lift components  98pages
 
BSI BS IEC/IEEE 65700-19-03 2014.08.31 Bushings for DC application  56pages
 
BSI BS EN 15458 2014.08.31 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae  16pages
 
BSI BS EN 15457 2014.08.31 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi  16pages
 
BSI BS EN 14190 2014.08.31 Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods  36pages
 
BSI BS ISO 17942 2014.08.31 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders  72pages
 
BSI BS ISO 17947 2014.08.31 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders  44pages
 
BSI BS ISO 18184 2014.08.31 Textiles — Determination of antiviral activity of textile products  54pages
 
BSI BS ISO 18227 2014.08.31 Soil quality — Determination of elemental composition by Xray fluorescence  50pages
 
BSI BS EN 62841-2-5 2014.08.31 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety Part 2-5: Particular requirements for hand-held circular saws  48pages
 
BSI BS ISO 18333 2014.08.31 Pallets for materials handling - Quality of new wooden components for flat pallets  18pages
 
BSI BS IEC 62396-5 2014.08.31 Process management for avionics — Atmospheric radiation effects Part 5: Assessment of thermal neutron fluxes and single event effects in avionics systems  26pages
 
BSI BS ISO 18436-2 2014.08.31 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel Part 2: Vibration condition monitoring and diagnostics  48pages
 
BSI BS ISO/IEC 8484 2014.08.31 Information technology - Magnetic stripes on savingsbooks  26pages
 
BSI BS EN 12645 2014.08.31 Tyre pressure measuring instruments — Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles — Metrology, requirements and testing  40pages
 
BSI BS IEC 62860-1 2014.08.31 Test methods for the characterization of organic transistor-based ring oscillators  26pages
 
BSI BS IEC 62860 2014.08.31 Test methods for the characterization of organic transistors and materials  28pages
 
BSI BS ISO 21573-1 2014.08.31 Building construction machinery and equipment — Concrete pumps Part 1: Terminology and commercial specifications  32pages
 
BSI BS IEC 62705 2014.08.31 Nuclear power plants — Instrumentation and control important to safety — Radiation monitoring systems (RMS): Characteristics and lifecycle  26pages
 
BSI BS EN ISO 844 2014.08.31 Rigid cellular plastics - Determination of compression properties  20pages
 
BSI BS EN 3774-004 2014.08.31 Aerospace series — Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A Part 004: UNC thread terminals — Product standard  16pages
 
BSI PD CEN ISO/TR 16060 2014.08.31 Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination  40pages
 
BSI BS ISO 23551-6 2014.08.31 Safety and control devices for gas burners and gas-burning appliances — Particular requirements Part 6: Thermoelectric flame supervision controls  30pages
 
BSI BS ISO 249 2014.08.31 Rubber, raw natural — Determination of dirt content  20pages
 
BSI PD ISO/TS 17383 2014.08.31 Determination of the triacylglycerol composition of fats and oils — Determination by capillary gas chromatography  22pages
 
BSI PD ISO/TR 8124-8 2014.08.31 Safety of toys Part 8: Age determination guidelines  38pages
 
BSI PD ISO/TR 11233 2014.08.31 Space systems — Orbit determination and estimation — Process for describing techniques  30pages
 
BSI PD ISO/TR 13392 2014.08.31 Health and safety in welding and allied processes — Arc welding fume components  14pages
 
BSI BS EN ISO 8330 2014.08.31 Rubber and plastics hoses and hose assemblies - Vocabulary  54pages
 
BSI PD ISO/TR 15686-11 2014.08.31 Buildings and constructed assets — Service life planning Part 11: Terminology  38pages
 
BSI BS EN ISO 8871-5 2014.08.31 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 5: Functional requirements and testing  22pages
 
BSI BS EN ISO 17463 2014.08.31 Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique  26pages
 
BSI PD ISO/TR 19244 2014.08.31 Guidance on transition periods for standards developed by ISO/TC 84 — Devices for administration of medicinal products and catheters  14pages
 
BSI BS EN ISO 3994 2014.08.31 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification  26pages
 
BSI PD ISO/TS 17242 2014.08.31 Quasi-static calibration procedure for belt force transducers  20pages
 
BSI BS EN ISO 8029 2014.08.31 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification  28pages
 
BSI BS EN 62522 2014.08.31 Calibration of tuneable laser sources  42pages
 
BSI PD ISO/TS 18571 2014.08.31 Road vehicles — Objective rating metric for non-ambiguous signals  74pages
 
BSI PD ISO/TS 18870 2014.08.31 Lifts (elevators) — Requirements for lifts used to assist in building evacuation  32pages
 
BSI BS EN ISO 16808 2014.08.31 Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems  36pages
 
BSI BS EN ISO 16559 2014.08.31 Solid biofuels — Terminology, definitions and descriptions  44pages
 
BSI BS EN ISO 11979-2 2014.08.31 Ophthalmic Implants - Intraocular Lenses Part 2: Optical Properties and Test Methods  34pages
 
BSI BS EN ISO 16251-1 2014.08.31 Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor  22pages
 
BSI BS EN ISO 15841 2014.08.31 Dentistry — Wires for use in orthodontics  22pages
 
BSI BS ISO 5610-13 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 13: Style T  18pages
 
BSI PD ISO/TS 15007-2 2014.08.31 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems Part 2: Equipment and procedures  26pages
 
BSI PD CEN/TS 16637-2 2014.08.31 Construction products — Assessment of release of dangerous substances Part 2: Horizontal dynamic surface leaching test  62pages
 
BSI BS EN 15752-1 2014.08.31 Glass in building — Adhesive backed polymeric film Part 1: Definitions and requirements  40pages
 
BSI BS ISO/IEC 27018 2014.08.31 Information technology — Security techniques — Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors  36pages
 
BSI PD IEC/TS 62129-3 2014.08.31 Calibration of wavelength/optical frequency measurement instruments Part 3: Optical frequency meters using optical frequency combs  24pages
 
BSI PD CEN/TR 15071 2014.08.31 Safety of toys — National translations of warnings and instructions for use in EN 71 series  154pages
 
BSI BS EN ISO 22975-3 2014.08.31 Solar energy — Collector components and materials Part 3: Absorber surface durability  42pages
 
BSI BS EN ISO 20346 2014.08.31 Personal protective equipment - Protective footwear  44pages
 
BSI PD CEN/TS 15548-1 2014.08.31 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method Part 1: Measurements at elevated temperatures from 100 °C to 850 °C  28pages
 
BSI PD CEN/TS 16628 2014.08.31 Energy Performance of Buildings — Basic Principles for the set of EPB standards  42pages
 
BSI PD CEN/TS 16629 2014.08.31 Energy Performance of Buildings — Detailed Technical Rules for the set of EPB-standards  42pages
 
BSI PD ISO/IEC TS 18661-1 2014.08.31 Information technology — Programming languages, their environments, and system software interfaces — Floatingpoint extensions for C Part 1: Binary floating-point arithmetic  66pages
 
BSI PD CEN/TS 16637-1 2014.08.31 Construction products — Assessment of release of dangerous substances Part 1: Guidance for the determination of leaching tests and additional testing steps  52pages
 
BSI PD ISO/IEC TR 29110-5-6-2 2014.08.31 Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) Part 5-6-2: Systems engineering — Management and engineering guide: Generic profile group: Basic profile  72pages
 
BSI PD CEN/TS 16700 2014.08.31 Paints and varnishes — Coating materials and coating systems for exterior wood — Assessment of resistance to impact of a coating on a wooden substrate  16pages
 
BSI PD IEC/TR 61788-20 2014.08.31 Superconductivity Part 20: Superconducting wires — Categories of practical superconducting wires — General characteristics and guidance  24pages
 
BSI PD IEC/TR 62681 2014.08.31 Electromagnetic performance of high voltage direct current (HVDC) overhead transmission lines  96pages
 
BSI PD IEC/TR 62726 2014.08.31 Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems  54pages
 
BSI BS EN ISO 4490 2014.08.31 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)  14pages
 
BSI PD IEC/TR 62918 2014.08.31 Nuclear power plants — Instrumentation and control important to safety — Use and selection of wireless devices to be integrated in systems important to safety  74pages
 
BSI BS EN ISO 6185-3 2014.08.31 Inflatable boats Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater  46pages
 
BSI PD IEC/TS 61244-2 2014.08.31 Determination of long-term radiation ageing in polymers Part 2: Procedures for predicting ageing at low dose rates  34pages
 
BSI BS EN ISO 3949 2014.08.31 Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification  22pages
 
BSI PD CEN/TS 16635 2014.08.31 Railway application — Design for PRM Use — Equipment and Components onboard Rolling Stock — Toilets  22pages

BSI BS ISO 3290-1 2014.08.31 Rolling bearings - Balls Part 1: Steel balls  24pages
 
BSI BS EN 50131-10 2014.08.31 Alarm systems — Intrusion and hold-up systems Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)  24pages
 
BSI BS EN 61753-053-2 2014.08.31 Fibre optic interconnecting devices and passive components — Performance standard Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C — Controlled environments  18pages
 
BSI BS EN 61753-071-2 2014.08.31 Fibre optic interconnecting devices and passive components — Performance standard Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C — Controlled environments  20pages
 
BSI BS ISO 5610-4 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 4: Style D  20pages
 
BSI BS ISO 5610-3 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 3: Style B  20pages
 
BSI BS ISO 5610-2 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 2: Style A  20pages
 
BSI BS ISO 12647-4 2014.08.31 Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints Part 4: Publication gravure printing  28pages
 
BSI BS ISO 5610-1 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 1: General survey, correlation and determination of dimensions  28pages
 
BSI BS ISO 3290-2 2014.08.31 Rolling bearings - Balls Part 2: Ceramic balls  24pages
 
BSI BS ISO 13095 2014.08.31 Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement  36pages
 
BSI BS ISO 16145-5 2014.08.31 Ships and marine technology — Protective coatings and inspection method Part 5: Assessment method for coating damages  16pages
 
BSI BS ISO 13577-4 2014.08.31 Industrial furnace and associated processing equipment — Safety Part 4: Protective systems  82pages
 
BSI BS ISO 9986 2014.08.31 Composition cork for shoe outsoles  14pages
 
BSI BS EN 62116 2014.08.31 Utility-interconnected photovoltaic inverters — Test procedure of islanding prevention measures  30pages
 
BSI BS EN 62148-15 2014.08.31 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages  26pages
 
BSI BS EN 62149-2 2014.08.31 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices  26pages
 
BSI BS EN 62149-3 2014.08.31 Fibre optic active components and devices - Performance standards Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems  18pages
 
BSI BS EN 16603-32-10 2014.08.31 Space engineering — Structural factors of safety for spaceflight hardware  28pages
 
BSI BS EN 16603-32-03 2014.08.31 Space engineering — Structural finite element models  24pages
 
BSI BS EN 16603-32-02 2014.08.31 Space engineering — Structural design and verification of pressurized hardware  80pages
 
BSI BS EN 16603-32-01 2014.08.31 Space engineering — Fracture control  86pages
 
BSI BS EN 16603-32 2014.08.31 Space engineering — Structural general requirements  140pages
 
BSI BS ISO 14934-4 2014.08.31 Fire tests — Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests  32pages
 
BSI BS EN 16603-10-03 2014.08.31 Space engineering — Testing  132pages
 
BSI BS EN 61970-301 2014.08.31 Energy management system application program interface (EMS-API) Part 301: Common Information Model (CIM) Base  376pages
 
BSI BS EN 61260-1 2014.08.31 Electroacoustics — Octave-band and fractional-octave-band filters Part 1: Specifications  48pages
 
BSI BS ISO 5610-14 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 14: Style H  20pages
 
BSI BS ISO 5610-15 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 15: Style V  16pages
 
BSI BS ISO 5630-7 2014.08.31 Paper and board — Accelerated ageing Part 7: Exposure to light  18pages
 
BSI PD IEC/TS 62548 2014.08.31 Photovoltaic (PV) arrays — Design requirements  64pages
 
BSI BS EN 60871-1 2014.08.31 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General  60pages
 
BSI BS EN 15755-1 2014.08.31 Glass in building — Adhesive backed polymeric filmed glass Part 1: Definitions and requirements  34pages
 
BSI BS EN 60794-2-51 2014.08.31 Optical fibre cables Part 2-51: Indoor cables — Detail specification for simplex and duplex cables for use in cords for controlled environment  16pages
 
BSI BS ISO 5610-12 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 12: Style S  24pages
 
BSI BS ISO 5610-11 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 11: Style R  18pages
 
BSI BS ISO 5610-10 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 10: Style N  20pages
 
BSI BS ISO 5610-9 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 9: Style L  20pages
 
BSI BS EN 61753-041-2 2014.08.31 Fibre optic interconnecting devices and passive components — Performance standard Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C — Controlled environment  24pages
 
BSI BS EN 60721-2-1 2014.08.31 Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature — Temperature and Humidity  16pages
 
BSI BS ISO 10002 2014.08.31 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations  40pages
 
BSI BS ISO 5610-8 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 8: Style K  20pages
 
BSI BS EN 61300-2-35 2014.08.31 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-35: Tests - Cable nutation  18pages
 
BSI BS ISO 5610-7 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 7: Style J  22pages
 
BSI BS ISO 6966-2 2014.08.31 Aircraft ground equipment — Basic requirements Part 2: Safety requirements  38pages
 
BSI BS ISO 5610-6 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 6: Style G  20pages
 
BSI BS ISO 5610-5 2014.08.31 Tool holders with rectangular shank for indexable inserts Part 5: Style F  20pages
 
BSI BS EN 61558-2-10 2014.08.31 Safety of transformers, reactors, power supply units and combinations thereof Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 20pages
 
BSI BS EN ISO 3167 2014.08.31 Plastics - Multipurpose test specimens - CORR: October 31, 2014  18pages
 
BSI BS ISO 9564-2 2014.08.31 Financial services — Personal Identification Number (PIN) management and security Part 2: Approved algorithms for PIN encipherment  14pages
 
BSI BS ISO 9869-1 2014.08.31 Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance Part 1: Heat flow meter method  48pages
 
BSI BS EN 60825-1 2014.08.31 Safety of laser products - Part 1: Equipment classification and requirements  110pages
 
BSI BS EN 60721-2-3 2014.08.31 Classification of environmental conditions Part 2-3: Environmental conditions appearing in nature — Air pressure  12pages
 
BSI BS EN 16228-1 2014.08.31 Drilling and foundation equipment — Safety Part 1: Common requirements  156pages
 
BSI BS EN 16601-10-01 2014.08.31 Space project management Part 10-01: Organization and conduct of reviews  30pages
 
BSI BS EN 62572-3 2014.08.31 Fibre optic active components and devices - Reliability standards Part 3: Laser modules used for telecommunication  22pages
 
BSI BS EN 16228-4 2014.08.31 Drilling and foundation equipment — Safety Part 4: Foundation equipment  16pages
 
BSI BS EN 16228-5 2014.08.31 Drilling and foundation equipment — Safety Part 5: Diaphragm walling equipment  20pages
 
BSI BS EN 16228-6 2014.08.31 Drilling and foundation equipment — Safety Part 6: Jetting, grouting and injection equipment  18pages
 
BSI BS EN 16228-2 2014.08.31 Drilling and foundation equipment — Safety Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining  30pages
 
BSI BS EN 16503 2014.08.31 Water quality — Guidance standard on assessing the hydromorphological features of transitional and coastal waters  24pages
 
BSI BS ISO 815-1 2014.08.31 Rubber, vulcanized or thermoplastic — Determination of compression set Part 1: At ambient or elevated temperatures  22pages
 
BSI BS EN 16228-7 2014.08.31 Drilling and foundation equipment — Safety Part 7: Interchangeable auxiliary equipment  26pages
 
BSI BS EN 16228-3 2014.08.31 Drilling and foundation equipment — Safety Part 3: Horizontal directional drilling equipment (HDD)  38pages
 
BSI BS EN 16500 2014.08.31 Machines for compacting waste materials or recyclable fractions — Vertical baling presses — Safety requirements  44pages
 
BSI BS EN 16601-60 2014.08.31 Space project management Part 60: Cost and schedule management  88pages
 
BSI BS EN 16601-80 2014.08.31 Space project management Part 80: Risk management  46pages
 
BSI BS EN 16493 2014.08.31 Water quality — Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys  16pages
 
BSI BS ISO 17602 2014.08.31 Ships and marine technology — Metal valves for use in flanged pipe — Face-to-face and centre-to-face dimensions  24pages
 
BSI BS EN 16476 2014.08.31 Liquid petroleum products — Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel — Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)  18pages
 
BSI BS EN 62325-301 2014.08.31 Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets  362pages
 
BSI BS ISO 2469 2014.08.31 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)  30pages
 
BSI BS EN 62841-2-2 2014.08.31 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches  22pages
 
BSI BS EN 62841-2-4 2014.08.31 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type  22pages
 
BSI BS ISO 17325-1 2014.08.31 Ships and marine technology — Marine environment protection — Oil booms Part 1: Design requirements  24pages
 
BSI BIP 2230 2014.08.29 Energy Audits. The key to delivering real energy reductions - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide  0pages
 
BSI BS EN 16603-10-12 2014.07.31 Space engineering — Method for the calculation of radiation received and its effects, and a policy for design margins  108pages
 
BSI BS ISO 12614-2 2014.07.31 Draft BS ISO 12614-2 Road vehicles - Liquefied natural gas (LNG) fuel system components - Part 2: Performance and general test methods  20pages
 
BSI PD CEN ISO/TS 17427 2014.07.31 Intelligent transport systems — Cooperative systems — Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems  56pages
 
BSI BS ISO 12614-1 2014.07.31 Road vehicles — Liquefied natural gas (LNG) fuel system components Part 1: General requirements and definitions  18pages
 
BSI BS IEC 62679-1-1 2014.07.31 Electronic paper displays Part 1-1: Terminology  16pages
 
BSI BS EN 16603-10-11 2014.07.31 Space engineering — Human factors engineering  60pages
 
BSI BS EN 16603-10-09 2014.07.31 Space engineering — Reference coordinate system  42pages
 
BSI BS ISO/IEC 27036-2 2014.07.31 Information technology — Security techniques — Information security for supplier relationships Part 2: Requirements  50pages
 
BSI BS ISO/IEC 29182-6 2014.07.31 Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) Part 6: Applications  28pages
 
BSI BS ISO/IEC 30112 2014.07.31 Information technology — Specification methods for cultural conventions  146pages
 
BSI BS EN 16603-20-06 2014.07.31 Space engineering — Spacecraft charging  124pages
 
BSI BS EN ISO 80601-2-69 2014.07.31 Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment - CORR: November 30, 2014  58pages
 
BSI BS 5656-3 2014.07.31 Safety rules for the construction and installation of escalators and moving walks – Part 3: Examination and test of new moving walks before putting into service – Specification for means of determining compliance with BS EN 115-1:2008+A1:2010  34pages
 
BSI BS IEC 62629-12-1 2014.07.31 3D Display devices Part 12-1: Measuring methods for stereoscopic displays using glasses - Optical  73pages
 
BSI BS ISO 11783-6 2014.07.31 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 6: Virtual terminal  324pages
 
BSI BS EN 16603-20-07 2014.07.31 Space engineering — Electromagnetic compatibility  94pages
 
BSI BS ISO 12614-5 2014.07.31 Road vehicles — Liquefied natural gas (LNG) fuel system components Part 5: Tank pressure gauge  14pages
 
BSI BS ISO 12614-4 2014.07.31 Road vehicles — Liquefied natural gas (LNG) fuel system components Part 4: Manual valve  16pages
 
BSI PD CEN ISO/TR 22007-5 2014.07.31 Plastics — Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples  46pages
 
BSI PD IEC/TS 62668-2 2014.07.31 Process management for avionics — Counterfeit prevention Part 2: Managing electronic components from non-franchised sources  42pages
 
BSI BS EN 60947-4-3 2014.07.31 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads  84pages
 
BSI PD IEC/TR 62343-6-5 2014.07.31 Dynamic modules Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules  28pages
 
BSI BS EN ISO 17225-6 2014.07.31 Solid biofuels — Fuel specifications and classes Part 6: Graded non-woody pellets  18pages
 
BSI PD IEC/TR 62690 2014.07.31 Hydrogen effects in optical fibre cables — Guidelines  14pages
 

分享到:
最新文章
最热关注
本月排行
Copyright 2000-2016 标准信息网. Some Rights Reserved | DESIGN BY [A]