AFNOR NF EN ISO 14889 2014.03.05 Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses  
 
AFNOR NF EN ISO 14554-1 2014.03.05 Quality requirements for welding - Resistance welding of metallic materials - Part 1 : comprehensive quality requirements  
 
AFNOR NF EN ISO 14554-2 2014.03.05 Quality requirements for welding - Resistance welding of metallic materials - Part 2 : elementary quality requirements  
 
AFNOR NF EN 13451-11 2014.03.05 Swimming pool equipment - Part 11 : additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads  
 
AFNOR NF EN ISO 25178-605 2014.03.05 Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments  
 
AFNOR NF EN 15254-6 2014.03.05 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6 : curtain walling  
 
AFNOR FD E51-767 2014.03.05 Ventilation for buildings - Ductwork tightness measurements  
 
AFNOR FD X30-433 2014.03.05 Household and related refuse - Methods for characterizing a plastic hollow-bodied ball  
 
AFNOR NF EN 12312-9 2014.03.05 Aircraft ground support equipment - Specific requirements - Part 9 : container/Pallet loaders  
 
AFNOR NF EN 12464-2 2014.03.05 Light and lighting - Lighting of work places - Part 2 : outdoor work places  
 
AFNOR CWA 16259 2014.03.01 Responsible Remote Gambling Measures  
 
AFNOR NF EN 1591-1 2014.02.28 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method  
 
AFNOR NF EN 302858-2 2014.02.28 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range - Part 2 : harmonized EN coverin 
 
AFNOR NF EN ISO 8586 2014.02.28 Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors  
 
AFNOR NF EN 302248 2014.02.28 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Navigation radar for use on non-SOLAS vessels - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (1.2.1)  
 
AFNOR NF EN 3102 2014.02.28 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility  
 
AFNOR NF EN 12390-13 2014.02.28 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression  
 
AFNOR NF S61-931 2014.02.28 Fire Safety Systems - General requirements  
 
AFNOR NF ISO 25597 2014.02.28 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution  
 
AFNOR NF EN 62047-18 2014.02.28 Semiconductor devices - Micro-electromechanical devices - Part 18 : bend testing methods of thin film materials  
 
AFNOR NF EN 302858-1 2014.02.28 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range - Part 1 : technical characteris 
 
AFNOR NF EN ISO 15791-1 2014.02.22 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1 : general guidance  
 
AFNOR NF EN ISO 10360-8 2014.02.22 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMS) - Part 8: CMMs with optical distance sensors  
 
AFNOR NF EN ISO 9539/A1 2014.02.22 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes - Amendment 1  
 
AFNOR NF EN ISO 19902/A1 2014.02.22 Petroleum and natural gas industries - Fixed steel offshore structures - Amendment 1  
 
AFNOR NF EN 15877-2 2014.02.22 Railway applications - Marking on railway vehicles - Part 2 : external markings on coaches, motives power units, locomotives on track machines  
 
AFNOR NF EN 62040-4 2014.02.22 Uninterruptible power systems (UPS) - Part 4 : environmental aspects - Requirements and reporting  
 
AFNOR NF EN ISO 2553 2014.02.22 Welding and allied processes - Symbolic representation on drawings - Welded, brazed and soldered joints  
 
AFNOR NF EN 60747-16-5 2014.02.22 Semiconductor devices - Part 16-5 : microwave integrated circuits - Oscillators  
 
AFNOR FD CEN/TR 16638 2014.02.19 Non-destructive testing - Penetrant and magnetic particle testing using blue light  
 
AFNOR XP CEN/TS 1187 2014.02.19 Test methods for external fire exposure to roofs  
 
AFNOR FD CEN/TR 16386 2014.02.19 Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory  
 
AFNOR FD CEN/TR 16598 2014.02.19 Collection of rationales for EN 1176 - Requirements  
 
AFNOR XP CEN ISO/TS 13830 2014.02.19 Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects  
 
AFNOR XP CEN/TS 16526 2014.02.19 Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performabnce characteristics  
 
AFNOR NF EN 62264-2 2014.02.15 Enterprise-control system integration - Part 2 : objects and attributes for enterprise-control system integration  
 
AFNOR NF ISO 16966 2014.02.15 Nuclear energy - Nuclear fuel technology - Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors  
 
AFNOR NF EN 60952-1 2014.02.15 Aircraft batteries - Part 1 : general test requirements and performance levels  
 
AFNOR NF EN 62264-1 2014.02.15 Enterprise-control system integration - Part 1 : models and terminology  
 
AFNOR NF EN 60947-5-3 2014.02.15 Low-voltage switchgear and controlgear - Part 5-3 : control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)  
 
AFNOR NF EN 16407-2 2014.02.15 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2 : Double wall radiographic inspection  
 
AFNOR NF EN 14076 2014.02.15 Timber stairs - Terminology  
 
AFNOR NF ISO 6262-1 2014.02.15 End mills with indexable inserts - Part 1 : end mills with flatted cylindrical shank  
 
AFNOR NF EN ISO 1680 2014.02.15 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines  
 
AFNOR NF EN 16407-1 2014.02.15 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1 : tangential radiographic inspection  
 
AFNOR NF ISO/CEI 20000-3 2014.02.15 Information technology - Service management - Part 3 : guidance on scope definition and applicability of ISO/IEC 20000-1  
 
AFNOR NF EN ISO 11073-10406 2014.02.15 Health informatics - Personal health device communication - Part 10406 : device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG)  
 
AFNOR NF EN 60445 2014.02.15 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors  
 
AFNOR NF ISO 8404 2014.02.15 Tools for moulding - Angle pins  
 
AFNOR NF ISO 15309 2014.02.15 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices  
 
AFNOR NF ISO 6262-2 2014.02.15 End mills with indexable inserts - Part 2 : end mills with Morse taper shank  
 
AFNOR NF EN ISO 17304 2014.02.15 Dentistry - Polymerisation shrinkage : method for determination of polymerisation shrinkage of polymer-based restorative materials  
 
AFNOR NF EN 60352-2/A1 2014.02.15 Solderless connections - Part 2 : crimped connections - General requirements, test methods and practical guidance  
 
AFNOR NF EN 16453 2014.02.15 Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard  
 
AFNOR FD CEN/TR 16589 2014.02.15 Laboratory installations - Capture devices with articulated extract arm  
 
AFNOR NF ISO 8425 2014.02.15 Nuclear fuel technology - Determination of plutonium in pure plutonium nitrate solutions - Gravimetric method  
 
AFNOR NF ISO 1081 2014.02.15 Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys - Vocabulary  
 
AFNOR NF ISO 3302-2 2014.02.15 Rubber - Tolerances for products - Part 2 : geometrical tolerances  
 
AFNOR NF EN 60952-2 2014.02.15 Aircraft batteries - Part 2 : design and construction requirements  
 
AFNOR FD S31-118 2014.02.15 Acoustics - Short Leq definition and use  
 
AFNOR XP R19-701 2014.02.12 Road vehicles - Experimental method for transposition of dynamic forces generated by an acitve component from a test bench to a vehicle  
 
AFNOR FD ISO/TR 16208 2014.02.12 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements  
 
AFNOR FD CEN/TR 16496 2014.02.12 Construction Products . Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods  
 
AFNOR FD ISO/TR 14069 2014.02.08 Greenhouse gases - Quantification and reporting of greenhouse gas emissions for organizations - Guidance for the application of ISO 14064-1  
 
AFNOR NF ISO 4000-2 2014.02.08 Passenger car tyres and rims - Part 2 : rims  
 
AFNOR NF EN 50518-3 2014.02.08 Monitoring and alarm receiving centre - Part 3 : procedures and requirements for operation  
 
AFNOR NF EN 13802 2014.02.08 Railway applications - Suspension components - Hydraulic dampers  
 
AFNOR NF EN 16362 2014.02.08 Railway applications - Ground based services - Water restocking equipment  
 
AFNOR XP ISO/TS 80004-6 2014.02.08 Nanotechnologies - Vocabulary - Part 6 : nano-object characterization  
 
AFNOR NF EN 50050-1 2014.02.08 Electrostatic hand-held spraying equipment - Safety requirements - Part 1 : hand-held spraying equipment for ignitable liquid coating materials  
 
AFNOR NF EN 50050-3 2014.02.08 Electrostatic hand-held spraying equipment - Safety requirements - Part 3 : hand-held spraying equipment for ignitable flock  
 
AFNOR NF EN 50332-2 2014.02.08 Sound system equipment : headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2 : matching of sets with headphones if either or both are offered separately, or are offere 
 
AFNOR NF EN 61968-100 2014.02.08 Application integration at electric utilities - System interfaces for distribution management - Part 100 : implementation profiles  
 
AFNOR NF EN 13599 2014.02.08 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes  
 
AFNOR NF EN 50518-2 2014.02.08 Monitoring and alarm receiving centre - Part 2 : technical requirements  
 
AFNOR NF EN 50050-2 2014.02.08 Electrostatic hand-held spraying equipment - Safety requirements - Part 2 : hand-held spraying equipment for ignitable coating powder  
 
AFNOR NF EN ISO 14238 2014.02.08 Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes  
 
AFNOR NF P26-341 2014.02.08 Building hardware - Automatic handling devices for sash of turning-, sliding- and sliding folding shutters  
 
AFNOR NF EN ISO 10360-9 2014.02.08 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9 : CMMs with multiple probing systems  
 
AFNOR NF EN 62481-3 2014.02.08 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3 : link protection  
 
AFNOR NF EN 62444 2014.02.08 Cable glands for electrical installations  
 
AFNOR XP CEN/TS 115-4 2014.02.08 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards  
 
AFNOR NF X15-221 2014.02.08 Emergency safety showers - Permanently plumbed-in body showers for sites other than laboratories  
 
AFNOR NF EN 50518-1 2014.02.08 Monitoring and alarm receiving centre - Part 1 : location and construction requirements  
 
AFNOR NF EN 13279-2 2014.02.08 Gypsum binders and gypsum plasters - Part 2 : test methods  
 
AFNOR NF ISO 13495 2014.02.08 Foodstuffs - Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid  
 
AFNOR NF EN 50332-1 2014.02.08 Sound system equipment : headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1 : general method for "one package equipment"  
 
AFNOR FD ISO/TR 12885 2014.02.05 Nanotechnologies. Health and safety practices in occupational settings relevant to nanotechnologies  
 
AFNOR XP C08-100-1 2014.02.05 Environmental declarations for electrical, electronic and HVAC equipment intended for use in building structures - Common rules  
 
AFNOR XP ISO/CEI TS 17021-4 2014.02.05 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 4 : competence requirements for auditing and certification of event sustainability management  
 
AFNOR FD ISO 31004 2014.02.05 Risk management - Guidance for the implementation of ISO 31000  
 
AFNOR NF EN 50541-2 2014.02.01 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2 : determination of loadability of a transformer loaded with non-sinusoidal current  
 
AFNOR NF ISO 16191 2014.02.01 Water quality - Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum  
 
AFNOR NF EN 1744-1+A1 2014.02.01 Tests for chemical properties of aggregates - Part 1 : chemical analysis  
 
AFNOR NF EN 300440-1 2014.02.01 Electromagnetic compatibility and radio spectrum matters (ERM) - Short range devices - Radio equipment to be used in the 1 GHz to 40 GHz frequency range - Part 1 : technical characteristics and test methods (V1.6.1)  
 
AFNOR NF EN 60268-3 2014.02.01 Sound system equipment - Part 3 : amplifiers  
 
AFNOR NF EN 300175-3 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - Common interface (CI) - Part 3 : medium access control (MAC) layer (V2.5.1)  
 
AFNOR NF EN 60444-6 2014.02.01 Measurement of quartz crystal unit parameters - Part 6 : measurement of drive level dependence (DLD)  
 
AFNOR NF EN 300175-2 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 2 : physical Layer (PHL) (V2.5.1)  
 
AFNOR NF EN 1744-1/IN1 2014.02.01 Tests for chemical properties of aggregates - Part 1 : chemical analysis