AFNOR NF 法国标准目录2014-8
AFNOR NF EN 61158-5-14 2014.08.16 Industrial communication networks - Fieldbus specifications - Part 5-14 : application layer service definition - Type 14 elements
AFNOR NF S52-002 2014.08.16 Light motorized vehicles - Electric hire karts - Safety requirements
AFNOR NF EN 61158-4-14 2014.08.16 Industrial communication networks - Fieldbus specifications - Part 4-14 : data-link layer protocol specification - Type 14 elements
AFNOR NF EN 61158-4-12 2014.08.16 Industrial communication networks - Fieldbus specifications - Part 4-12 : data-link layer protocol specification - Type 12 elements
AFNOR NF EN 61158-3-19 2014.08.16 Industrial communication networks - Fieldbus specifications - Part 3-19 : data-link layer service definition - Type 19 elements
AFNOR NF P16-442 2014.08.16 Installation and maintenance of light liquids separators and sludge traps
AFNOR NF EN 61158-3-14 2014.08.16 Industrial communication networks - Fieldbus specifications - Part 3-14 : data-link layer service definition - Type 14 : elements
AFNOR NF EN 14893 2014.08.16 LPG equipment and accessories - Transportable Liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
AFNOR NF EN 3983 2014.08.16 Aerospace series - Aluminium alloy AL-P7050 -T7651 - Plate - 6 mm < a < or = 160 mm
AFNOR NF EN 14190 2014.08.16 Gypsum board products from reprocessing - Definitions, requirements and test methods
AFNOR NF EN 61158-3-12 2014.08.16 Industrial communication networks - Fieldbus specifications - Part 3-12 : data-link layer service definition - Type 12 elements
AFNOR NF U42-107 2014.08.16 Fertilizers - Determination of water-insoluble matter
AFNOR NF D36-133 2014.08.16 End fittings with seal gasket for corrupted metallic flexible piping for the external connection of domestic appliances using gazeous fuels distributed by network
AFNOR NF EN 1991-1-7/A1 2014.08.16 Eurocode 1 - Actions on structures - Part 1-7 : general actions - Accidental actions
AFNOR NF EN 140401-804/A1 2014.08.16 Detail Specification : fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1;0,25
AFNOR NF EN 60695-2-13/A1 2014.08.16 Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
AFNOR NF EN 140401-801/A1 2014.08.16 Detail specification : fixed low power film SMD resistors - Rectangular - Stability classes 0,1;0,25;0,5;1
AFNOR NF EN ISO 10343 2014.08.16 Ophthalmic instruments - Ophthalmometers
AFNOR NF EN 300392-12-8 2014.08.16 Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12 : supplementary services stage 3 - Sub-part 8 : area Selection (AS) (V1.2.1)
AFNOR NF EN 140401-802/A2 2014.08.16 Detail specification : fixed low power film SMD resistors - Rectangular - Stability classes 1;2
AFNOR NF ISO 1986-1 2014.08.16 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1 : machines with a table length of up to 1 600 mm
AFNOR NF EN ISO 6427 2014.08.16 Plastics - Determination of matter extractable by organic solvents (conventional methods)
AFNOR FD E29-761 2014.08.13 Gas cylinders - Hydraulic bursting test
AFNOR FD ISO 10002 2014.08.13 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations
AFNOR FD ISO/TR 13570-2 2014.08.13 Wheelchairs - Part 2 : typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5
AFNOR FD ISO/TR 16098 2014.08.13 Reclaimed rubbers and reclaimed crumb rubbers - Evaluation of dispersion in rubber mixes
AFNOR FD E29-760 2014.08.13 Gaz cylinders - Fatigue srength testing under repeated pressurizing for liquefied or dissolved compressed gases
AFNOR NF EN 60034-30-1 2014.08.09 Rotating electrical machines - Part 30-1 : efficiency classes of operated AC motors (IE-code)
AFNOR NF EN 60721-2-9 2014.08.09 Classification of environmental conditions - Part 2-9 : environmental conditions appearing in nature - Measured shock and vibration data - Storage, Transportation and in-use
AFNOR NF EN ISO 9902-1/A2 2014.08.09 Textile machinery - Noise test code - Part 1 : common requirements - Amendment 2
AFNOR NF EN ISO 9902-2/A2 2014.08.09 Textile machinery - Noise test code - Part 2 : spinning preparatory and spinning machinery - Amendement 2
AFNOR NF EN ISO 9902-3/A2 2014.08.09 Textile machinery - Noise test code - Part 3 : Nonwoven machinery - Amendment 2
AFNOR NF EN 16425 2014.08.09 Simple Publishing Interface
AFNOR NF DTU 34.1 P2 2014.08.09 Building works - Installation of industrial, commercial and garage doors and gates - Part 2 : contract bill of special administrative model clauses
AFNOR NF EN ISO 9902-4/A2 2014.08.09 Textile machinery - Noise test code - Part 4 : yarn processing, cordage and rope manufacturing machinery - Amendment 2
AFNOR NF DTU 34.1 P1-2 2014.08.09 Building works - Installation of industrial, commercial and garage doors and gates - Part 1-2 : general criteria for choice of materials
AFNOR NF EN 13205-6 2014.08.09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6 : transport and handling tests
AFNOR NF EN 13205-2 2014.08.09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2 : laboratory performance test based on determination of sampling efficiency
AFNOR NF EN ISO 9902-7/A2 2014.08.09 Textile machinery - Noise test code - Part 7 : dyeing and finishing machinery - Amendment 2
AFNOR NF EN 12873-1 2014.08.09 Influence of materials on water intended for human consumption - Influence due to migration - Part 1 : test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
AFNOR NF EN ISO 9902-6/A2 2014.08.09 Textile machinery - Noise test code - Part 6 : fabric manufacturing machinery - Amendment 2
AFNOR NF EN 13205-4 2014.08.09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
AFNOR NF EN ISO 21670 2014.08.09 Fasteners - Hexagon weld nuts with flange
AFNOR NF EN 13205-5 2014.08.09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5 : aerosol sampler performance test and sampler comparison carried out at workplaces
AFNOR NF DTU 34.1 P1-1 2014.08.09 Building works - Installation of industrial, commercial and garage doors and gates - Part 1-1 : Contract bill of technical model clauses
AFNOR NF EN 13480-8 V2/A1 2014.08.09 Metallic industrial piping - Part 8 : additionnal requirements for aluminium and aluminium alloys piping
AFNOR NF EN ISO 10140-5/A1 2014.08.09 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5 : requirements for test facilities and equipment - Amendment 1 : rainfall sound
AFNOR NF DTU 34.1 2014.08.09 Building works - Installation of industrial, commercial and garage doors and gates - Part 1-1 : Contract bill of technical model clauses - Part 1-2 : general criteria for choice of materials - Part 2 : contract bill of special administrative m
AFNOR NF EN 62382 2014.08.09 Control systems in the process industry - Electrical and instrumentation loop check
AFNOR NF EN ISO 9902-5/A2 2014.08.09 Textile machinery - Noise test code - Part 5 : weaving and knitting preparatory machinery - Amendment 2
AFNOR NF S86-305 2014.08.09 Horology - Radioluminescent time measuring instruments
AFNOR NF EN 14427 2014.08.09 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
AFNOR NF EN 302636-2 2014.08.09 Intelligent transport systems (ITS) - Vehicular communications - GeoNetworking - Part 2 : scenarios (V1.2.1)
AFNOR NF EN 12697-43 2014.08.09 Bituminous mixtures - Test methods for hot mix asphalt - Part 43 : resistance to fuel
AFNOR NF EN 508-1 2014.08.09 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1 : Steel
AFNOR NF EN 900 2014.08.09 Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite
AFNOR NF EN 13963 2014.08.09 Jointing materials for gypsum boards - Definitions, requirements and test methods
AFNOR NF EN 62670-1 2014.08.09 Photovoltaic concentrators (CPV) - Performance testing - Part 1 : standard Conditions
AFNOR NF EN 1643 2014.08.09 Safety and control devices for gas burners and burning appliances - Valve proving systems for automatic shut-off valves
AFNOR NF EN 60061-3/A48 2014.08.09 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges
AFNOR NF EN 60061-2/A47 2014.08.09 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : lampholders
AFNOR NF EN 61558-2-10 2014.08.09 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10 : particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 0
AFNOR NF ISO 2476 2014.08.09 Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures
AFNOR NF EN ISO 16297 2014.08.09 Milk - Bacterial count - Protocol for the evaluation of alternative methods
AFNOR NF ISO 2393 2014.08.09 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
AFNOR NF EN ISO 6808 2014.08.09 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
AFNOR NF EN 61936-1/A1 2014.08.09 Power installations exceeding 1 kV a.c. - Part 1 : common rules
AFNOR NF EN 16191 2014.08.09 Tunnelling machinery - Safety requirements
AFNOR NF EN 60831-2 2014.08.09 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2 : ageing test, self-healing test and destruction test
AFNOR NF EN 13205-1 2014.08.09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1 : general requirements
AFNOR NF EN 60831-1 2014.08.09 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1 : general - Performance, testing and rating - Safety requirements - Guide for installation and operation
AFNOR NF P98-128 2014.08.09 Road foundations and roadbeds - Road roller-compacted concretes and high performances aggregates treated with hydraulic binders - Definition, composition and classification
AFNOR NF EN 61837-2/A1 2014.08.09 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2 : ceramic enclosures
AFNOR NF ISO 17289 2014.08.09 Water quality - Determination of dissolved oxygen - Optical sensor method
AFNOR NF EN 61788-5 2014.08.09 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
AFNOR NF EN ISO 4126-6 2014.08.09 Safety devices for protection against excessive pressure - Part 6 : application, selection and installation of bursting disc safety devices
AFNOR NF EN 16447 2014.08.09 Explosion isolation flap valves
AFNOR NF EN ISO 10683 2014.08.09 Fasteners - Non-electrolytically applied zinc flake coatings
AFNOR NF EN 13950 2014.08.09 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
AFNOR NF EN 15080-12 2014.08.09 Extended application of results from fire resistance tests - Part 12 : loadbearing masonry walls
AFNOR NF EN 123100 2014.08.09 Sectional Specifications : single and double-sided printed boards with plain holes - Modified by NF EN 123100/A1:201409 (C93-123-100/A1)
AFNOR NF EN 61968-9 2014.08.09 Application integration at electric utilities - System interfaces for distribution management - Part 9 : interface for meter reading and control
AFNOR NF EN ISO 3233-2 2014.08.09 Paints and varnishes - Determination of the percentage volume of non-volatile matter Part 2 : method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of the dry-film density on coated test pa
AFNOR FD E39-007 2014.08.06 District heating - Counting of heat and frigorific energy - Guidelines for selecting, installation and operation
AFNOR XP ISO/CEI TS 17027 2014.08.06 Conformity assessment - Vocabulary related to competence of persons used for certification of persons
AFNOR XP CEN/TS 16555-1 2014.08.06 Innovation management - Part 1 : innovation management system
AFNOR NF EN 16590-4 2014.08.02 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4 : production, operation, modification and supporting processes
AFNOR NF ISO 2109 2014.08.02 Continuous mechanical handling equipment - Light duty belt conveyors for loose bulk materials
AFNOR NF EN ISO 16373-3 2014.08.02 Textiles - Dyestuffs - Part 3 : method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol)
AFNOR NF EN ISO 16373-2 2014.08.02 Textiles - Dyestuffs - Part 2 : general method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water)
AFNOR NF EN 2245 2014.08.02 Aerospace series - Pipelines for liquids and gases - Definitions
AFNOR NF ISO 2322 2014.08.02 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
AFNOR NF ISO 16463 2014.08.02 Polycristalline diamond inserts, tipped - Dimensions, types
AFNOR NF ISO 13165-2 2014.08.02 Water quality - Radium 226 - Part 2 : test method using emanometry
AFNOR NF EN 16656 2014.08.02 Information technology - Radio frequency identification for item management - RFID Emblem
AFNOR NF EN 16482 2014.08.02 Founding - Continuous cast iron bars
AFNOR NF EN ISO 19115-1 2014.08.02 Geographic information - Metadata - Part 1 : fundamentals
AFNOR NF EN 1124-2 2014.08.02 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2 : system S, forms and dimensions
AFNOR NF ISO 1536 2014.08.02 Continuous mechanical handing equipment for loose bulk materials - Troughed belt conveyor (other than portable conveyors) - Belt pulleys
AFNOR NF ISO 10844 2014.08.02 Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres
AFNOR NF EN 14570 2014.08.02 LPG equipment and accessories - Equipping of overground and underground LPG vessels
AFNOR NF EN 16590-3 2014.08.02 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3 : series development, hardware and software
AFNOR NF EN 16590-2 2014.08.02 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2 : concept phase
AFNOR NF EN 14122 2014.08.02 Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography
AFNOR NF EN 289 2014.08.02 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
AFNOR NF EN 60068-1 2014.08.02 Environmental testing - Part 1 : general and guidance
AFNOR NF EN 60317-36 2014.08.02 Specifications for particular types of winding wires - Part 36 : solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
AFNOR NF C14-100/A2 2014.08.02 Low-voltage mains installations
AFNOR NF EN ISO 10140-1/A2 2014.08.02 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1 : application rules for specific products Amendment 2 : rainfall sound
AFNOR NF EN ISO 19119 2014.08.02 Geographic information - Services
AFNOR NF EN 303039 2014.08.02 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service - Multichannel transmitter specification for the PMR Service - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (V1
AFNOR NF X50-056 2014.08.02 Services for resident persons
AFNOR NF EN ISO 23553-1 2014.08.02 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1 : automatic and semi-automatic valves
AFNOR NF ISO 1816 2014.08.02 Continuous mechanical handling equipment for loose bulk materials and unit loads - Belt conveyors - Basic characteristics of motorized driving pulleys
AFNOR NF S52-010 2014.08.02 Public swimming pool - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods
AFNOR NF EN 16479 2014.08.02 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
AFNOR NF EN ISO 10350-1/A1 2014.08.02 Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials - Amendment 1
AFNOR NF EN 16590-1 2014.08.02 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1 : general principles for design and development
AFNOR NF EN ISO 10545-8 2014.08.02 Ceramic tiles - Part 8 : determination of linear thermal expansion
AFNOR NF ISO 1535 2014.08.02 Continuous mechanical handling equipment for loose bilk materials - Troughedbelt conveyors (other than portable conveyors) - Belts
AFNOR NF EN 60947-4-3 2014.08.02 Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
AFNOR NF EN 60034-18-41 2014.08.02 Rotating electrical machines - Part 18-41 : partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
AFNOR AFNOR C17-205 2014.08.01 Outdoor lighting installation - Determination of cross sectional Area of conductors and selection of protective devices
AFNOR NF EN 60695-2-12/A1 2014.07.25 Fire hazard testing - Part 2-12 : glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
AFNOR NF EN 61375-3-4 2014.07.25 Electronic railway equipment - Train communication network (TCN) - Part 3-4 : ethernet consist network (ECN)
AFNOR NF EN ISO 81060-2 2014.07.25 Non-invasive sphygmomanometers - Part 2 : clinical investigation of automated measurement type
AFNOR NF EN 1995-1-1/A2 2014.07.25 Eurocode 5 : design of timber structures - Part 1-1 : general - Common rules and rules for buildings
AFNOR NF EN 16571 2014.07.25 Information technology - RFID privacy impact assessment process
AFNOR NF EN ISO 6509-1 2014.07.25 Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1 : test method
AFNOR NF ISO 16000-29 2014.07.25 Indoor air - Part 29 : test methods for VOC detectors
AFNOR NF EN ISO 20753 2014.07.25 Plastics - Test specimens
AFNOR NF EN 13859-1 2014.07.25 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1 : underlays for discontinuous roofing
AFNOR NF EN 13859-2 2014.07.25 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2 : underlays for walls
AFNOR NF X50-553 2014.07.25 Management of research activities
AFNOR NF ISO 2148 2014.07.25 Continuous handling equipment - Nomenclature
AFNOR NF EN 16436-1 2014.07.25 Rubber and plastic hoses, tubings and assemblies for use with propane, butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
AFNOR NF S31-088 2014.07.25 Acoustics - Characterization and measurement of railway traffic noise
AFNOR NF ISO 16000-31 2014.07.25 Indoor air - Part 31 : measurement of flame retardants and plasticizers based on organophosphorus compounds - Phosphoric acid ester
AFNOR NF ISO 4123 2014.07.25 Belt conveyors - Impact rings for carrying idlers and discs for return idlers- Main dimensions
AFNOR NF EN ISO 8871-2/A1 2014.07.25 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2 : identification and characterization - Amendment 1
AFNOR NF EN ISO 11073-10102 2014.07.25 Health informatics - Point-of-care medical device communication - Part :10102 : nomenclature - Annotated ECG
AFNOR NF EN ISO 17081 2014.07.25 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
AFNOR NF EN ISO 19900 2014.07.25 Petroleum and natural gas industries - General requirements for offshore structures
AFNOR NF EN ISO 19110/A1 2014.07.25 Geographic information . Methodology for feature cataloguing . Amendment 1
AFNOR NF EN 16203 2014.07.25 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks
AFNOR NF EN 4443 2014.07.25 Aerospace series - Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification : 900 MPa (at ambient temperature)/425 °C
AFNOR NF EN 50492/A1 2014.07.25 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
AFNOR NF ISO 13179-1 2014.07.25 Implants for surgery - Plasma-sprayed unalloyed titanium coatings on metallic surgical implants - Part 1 : general requirements
AFNOR NF EN 1097-10 2014.07.25 Tests for mechanical and physical properties of aggregates - Part 10 : determination of water suction height
AFNOR NF EN 13451-3/IN2 2014.07.25 Swimming pool equipment - Part 3 : additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
AFNOR NF ISO 14104 2014.07.25 Gears - Surface temper etch inspection after grinding, chemical method
AFNOR NF EN 13451-3+A2 2014.07.25 Swimming pool equipment - Part 3 : additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
AFNOR NF ISO 16000-27 2014.07.25 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
AFNOR NF EN 12420 2014.07.25 Copper and copper alloys - Forgings
AFNOR NF P98-352 2014.07.25 Footways - Tactile ground surface indicators in lines for use by blind or partially sighted persons or by persons orientation difficulties
AFNOR NF ISO 5048 2014.07.25 Continuous mechanical handling equipment - Belt convoyors with carrying idlers - Calculation of operating power and tensile forces
AFNOR NF EN 1993-1-1/A1 2014.07.25 Eurocode 3 : design of steel structures - Part 1-1 : general rules and rules for buildings
AFNOR FD X30-024 2014.07.23 Guide for undertaking assignments as defined in Article L. 225-102-1 of the commercial code
AFNOR NF ISO 13612-2 2014.07.18 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 2 : energy calculation
AFNOR NF EN 60684-3-283/A1 2014.07.18 Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 283 : heat-shrinkable, polyolefin sleeving, for bus-bar insulation
AFNOR NF EN 60034-8/A1 2014.07.18 Rotating electrical machines - Part 8 : terminal markings and direction of rotation - Amendment 1
AFNOR NF ISO 55000 2014.07.18 Asset management - Overview, principles and terminology
AFNOR NF EN 60041 2014.07.18 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pumps-turbines
AFNOR NF ISO 2936 2014.07.18 Assembly tools for screws and nuts - Hexagon socket screw keys
AFNOR NF ISO 55001 2014.07.18 Asset management - Management systems - Requirements
AFNOR NF EN 61800-7-202 2014.07.18 Adjustable speed electrical power drive systems - Part 7-202 : generic interface and use of profiles for power drive systems - Profile type 2 specification
AFNOR NF ISO 55002 2014.07.18 Asset management - Management systems - Guidelines for the application of ISO 55001
AFNOR NF EN 12823-1 2014.07.18 Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1 : measurement of all-E-retinol and 13-Z-retinol
AFNOR NF EN 13523-14 2014.07.18 Coil coated metals - Test methods - Part 14 : chalking (Helmen method)
AFNOR NF EN 13523-7 2014.07.18 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
AFNOR NF EN 62626-1 2014.07.18 Low-voltage switchgear and controlgear enclosed equipment - Part 1 : enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
AFNOR NF EN 62761 2014.07.18 Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF)
AFNOR NF EN 15269-5 2014.07.18 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assesmblies, including their elements of building hardware - Part 5 : fire resistance of hinged and pivoted metal framed glazed
AFNOR NF EN 1127-2 2014.07.18 Explosive atmospheres - Explosion prevention and protection - Part 2 : basic concepts and methodology for mining
AFNOR NF EN 3768 2014.07.18 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 °C
AFNOR NF EN 13523-0 2014.07.18 Coil coated metals - Test methods - Part 0 : general introduction
AFNOR NF EN 13523-2 2014.07.18 Coil coated metals - Test methods - Part 2 : gloss
AFNOR NF EN 13523-3 2014.07.18 Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison
AFNOR NF EN 302065-3 2014.07.18 Electromagnetic compatibility and radio spectrum matters (ERM) - Short range devices (SRD) using ultra wide band technology (UWB) - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 3 : requirem
AFNOR NF EN 13523-9 2014.07.18 Coil coated metals - Test methods - Part 9 : resistance to water immersion
AFNOR NF EN ISO 17184 2014.07.18 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
AFNOR NF EN 13523-25 2014.07.18 Coil coated metals - Test methods - Part 25 : resistance to humidity
AFNOR NF EN 13523-26 2014.07.18 Coil coated metals - Test methods - Part 26 : resistance to condensation of water
AFNOR NF EN 14654-1 2014.07.18 Management and control of operational activities in drain and sewer systems outside buildings - Part 1 : cleaning
AFNOR NF EN 62321-5 2014.07.18 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
AFNOR NF EN 62321-4 2014.07.18 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
AFNOR NF EN 62321-3-2 2014.07.18 Determination of certain substances in electrotechnical products - Part 3-2 : screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography
AFNOR NF EN 302065-1 2014.07.18 Electromagnetic compatibility and radio spectrum matters (ERM) - Short range devices (SRD) using ultra wide band technology (UWB) - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 1: requireme
AFNOR NF EN 302065-2 2014.07.18 Electromagnetic compatibility and radio spectrum matters (ERM) - Short range devices (SRD) using ultra wide band technology (UWB) - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2 : requirem
AFNOR NF EN 1344 2014.07.18 Clay pavers - Requirements and test methods
AFNOR NF EN 13523-5 2014.07.18 Coil coated metals - Test methods - Part 5 : resistance to rapid deformation (impact test)
AFNOR NF EN 13523-13 2014.07.18 Coil coated metals - Test methods - Part 13 : resistance to accelerated ageing by the use of heat
AFNOR NF EN 12312-2 2014.07.18 Aircraft ground support equipment - Specific requirements - Part 2 : catering vehicles
AFNOR NF ISO 24035 2014.07.18 Belt drives - V-belts and the corresponding pulleys for agricultural machineries - Dimensions
AFNOR NF Q34-100 2014.07.11 Tissue paper and tissue products - Converted articles - Technical properties
AFNOR NF ISO/CEI GUIDE 98-3 2014.07.11 Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995)
AFNOR NF EN 12111 2014.07.11 Tunnelling machines - Road headers and continuous miners - Safety requirements
AFNOR NF ISO 3951-1 2014.07.11 Sampling procedures for inspection by variables - Part 1 : Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
AFNOR NF EN ISO 15181-6 2014.07.11 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6 : determination of tralopyril release rate by quantitation of its degradation product in the extract
AFNOR NF EN 60819-3-4 2014.07.11 Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materials - Sheet 4 : aramid fibre paper containing not more than 50 % of mica particles
- AFNOR NF 法国标准目录2014-9(2015-1-14 8:58:51)
- AFNOR NF 法国标准目录2014-10(2015-1-14 8:46:33)
- AFNOR NF 法国标准目录2014-11(2015-1-14 8:41:18)
- AFNOR NF 法国标准目录 2014-12(2015-1-14 8:36:32)
- NF标准中文翻译目录(2011-4-22 18:11:48)
