The handbook contains 95 product standards for fasteners without threads, such as pins, rivets, keys, adjusting and retaining rings, as well as new international standards on blind rivets.

DIN 101 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Rivets; technical specifications
DIN 124 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Steel round head rivets with nominal diameters from 10 to 36 mm
DIN 258 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1977-02Taper Pins with Thread Ends and Constant Taper Lengths
DIN 268 , Publication date: 1974-09Tangential Keys and Tangential Keyways for Alternating Shock Loads
DIN 271 , Publication date: 1974-09Tangential Keys and Tangential Keyways for Constant Loads
DIN 302 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Countersunk head rivets; nominal diameters 10 to 36 mm
DIN 471 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1981-09Circlips (retaining rings) for shafts; Normal type and heavy type
DIN 472 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1981-09Circlips (retaining rings) for bores; Normal type and heavy type
DIN 660 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Round head rivets; nominal diameters 1 to 8 mm
DIN 661 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Countersunk head rivets; nominal diameters 1 to 8 mm
DIN 662 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Mushroom head rivets; nominal diameters 1,6 to 6 mm
DIN 674 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Flat round head rivets; nominal diameters 1,4 to 6 mm
DIN 675 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-10Flat countersunk head rivets; nominal diameters 3 to 5 mm
DIN 918 , Publication date: 1979-09Fasteners; Terminology; Spelling of terms; Abbreviations
DIN 918 Beiblatt 1 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1987-11Fasteners; representation of ized fasteners and their nomenclature
DIN 983 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1981-09Retaining rings with lugs for shafts
DIN 984 , Publication date: 1981-09Spring retaining rings with lugs for use in bores (internal circlips)
DIN 988 , Publication date: 1990-03Shim rings and supporting rings
DIN 1143-1 , Publication date: 1982-08Nails for use in automatic nailing machines
DIN 1157 , Publication date: 1973-04Tin tacks
DIN 1158 , Publication date: 1973-04Hook nails
DIN 1163 , Publication date: 1973-04Molding pins
DIN 1445 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1977-02Clevis pins with head and threaded portion
DIN 1469 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1978-11Grooved Pins, Half Length Grooved with Gorge
DIN 6434 , Publication date: 1984-11Rivet sets
DIN 6791 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Semi-tubular pan head rivets; nominal diameters 1,6 to 10 mm
DIN 6792 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Semi-tubular countersunk head rivets; nominal diameters 1,6 to 10 mm
DIN 6799 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1981-09Lock washers (retaining washers) for shafts
DIN 6880 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1975-04Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN 6881 , Publication date: 1956-02Taper Key Torque Transmission; Saddle Keys, Dimensions and Application
DIN 6883 , Publication date: 1956-02Taper Key Torque Transmission; Parallel Keys, Dimensions and Application
DIN 6884 , Publication date: 1956-02Taper Key Torque Transmission; Gib-head Parallel Keys, Dimensions and Application
DIN 6885-1 , Publication date: 1968-08Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 6885-2 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1967-12Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and Application
DIN 6885-3 , Publication date: 1956-02Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern, Dimensions and Application
DIN 6886 , Publication date: 1967-12Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application
DIN 6887 , Publication date: 1968-04Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application
DIN 6888 , Publication date: 1956-08Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application
DIN 6889 , Publication date: 1956-02Taper Key Torque Transmission; Gib-head Saddle Keys, Dimensions and Application
DIN 7331 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Compression rivets
DIN 7338 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-08Rivets for brake linings and clutch linings
DIN 7339 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Tubular rivets (one piece) drawn from strip
DIN 7340 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1993-05Tubular rivets cut from the tube
DIN 7341 , Publication date: 1977-07Rivet Pins
DIN 7349 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1974-07Plain Washers for Bolts with Heavy Clamping Sleeves
DIN 7993 , Publication date: 1970-04Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores
DIN 11024 , Publication date: 1973-01Spring Cotters
DIN 18182-4 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1987-01Accessories for use with gypsum plasterboards; nails
DIN 68163 , Publication date: 1982-01Fasteners for assembling timber pallets; nails
DIN EN 10230-1 , Publication date: 2000-01Steel wire nails - Part 1: Loose nails for general applications; German version EN 10230-1:1999
DIN EN 22339 , Publication date: 1992-10Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992
DIN EN 22340 , Publication date: 1992-10Clevis pins without head (ISO 2340:1986); german version EN 22340:1992
DIN EN 22341 , Publication date: 1992-10Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
DIN EN 28736 , Publication date: 1992-10Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992
DIN EN 28737 , Publication date: 1992-10Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992
DIN EN 28738 , Publication date: 1992-10Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992
DIN EN 28749 , Publication date: 1992-10Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
DIN EN ISO 1234 , Publication date: 1998-02Split pins (ISO 1234:1997); German version EN ISO 1234:1997
DIN EN ISO 2338 , Publication date: 1998-02Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997
DIN EN ISO 3269 , Publication date: 2000-11Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
DIN EN ISO 8733 , Publication date: 1998-03Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997
DIN EN ISO 8734 , Publication date: 1998-03Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997
DIN EN ISO 8735 , Publication date: 1998-03Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997
DIN EN ISO 8739 , Publication date: 1998-03Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
DIN EN ISO 8740 , Publication date: 1998-03Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
DIN EN ISO 8741 , Publication date: 1998-03Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997
DIN EN ISO 8742 , Publication date: 1998-03Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997
DIN EN ISO 8743 , Publication date: 1998-03Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997
DIN EN ISO 8744 , Publication date: 1998-03Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
DIN EN ISO 8745 , Publication date: 1998-03Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
DIN EN ISO 8746 , Publication date: 1998-03Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997
DIN EN ISO 8747 , Publication date: 1998-03Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997
DIN EN ISO 8748 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1998-03Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997); German version EN ISO 8748:1997
DIN EN ISO 8750 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1998-03Spring-type straight pins - Coiled,  duty (ISO 8750:1997); German version EN ISO 8750:1997
DIN EN ISO 8751 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1998-03Spring-type straight pins - Coiled, light duty (ISO 8751:1997); German version EN ISO 8751:1997
DIN EN ISO 8752 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1998-03Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997
DIN EN ISO 13337 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 1998-02Spring-type straight pins, slotted, light duty (ISO 13337:1997); German version EN ISO 13337:1997
DIN EN ISO 14589 , Publication date: 2001-08Blind rivets - Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000
DIN EN ISO 15975 , Publication date: 2003-04Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002
DIN EN ISO 15976 , Publication date: 2003-04Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002
DIN EN ISO 15977 [PLEASE NOTE: DOCUMENT WITHDRAWN] , Publication date: 2003-04Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002
DIN EN ISO 15978 , Publication date: 2003-04Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002
DIN EN ISO 15979 , Publication date: 2003-04Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002
DIN EN ISO 15980 , Publication date: 2003-04Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002
DIN EN ISO 15981 , Publication date: 2003-04Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002
DIN EN ISO 15982 , Publication date: 2003-04Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002
DIN EN ISO 15983 , Publication date: 2003-04Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002
DIN EN ISO 15984 , Publication date: 2003-04Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002
DIN EN ISO 16582 , Publication date: 2003-04Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002
DIN EN ISO 16583 , Publication date: 2003-04Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002
DIN EN ISO 16584 , Publication date: 2003-04Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002
DIN EN ISO 16585 , Publication date: 2003-04Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002
ISO 2768-1 , Publication date: 1989-11General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications
ISO 2768-2 , Publication date: 1989-11General tolerances; part 2: geometrical tolerances for features without individual tolerance indications
ISO 14588 , Publication date: 2000-12Blind rivets - Terminology and definitions