JIS日本钢铁标准2
发布-leeglee | 查看- | 发表时间-2013/8/21
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)
161 | JIS G 0307-1998 | Steel castings-General technical delivery requirements |
162 | JIS G 0320-2009 | Standard test method for heat analysis of steel products |
163 | JIS G 0321-2010 | Product analysis and its tolerance for wrought steel |
164 | JIS G 0404-2010 | Steel and steel products-General technical delivery requirements |
165 | JIS G 0415-1999 | Steel and steel products-Inspection documents |
166 | JIS G 0416-2006 | Steel and steel products-Location and preparation of samples and test pieces for mechanical testing |
167 | JIS G 0416-2008 | Amendment 1(追補1) |
168 | JIS G 0417-1999 | Steel and iron-Sampling and preparation of samples for the determination of chemical composition |
169 | JIS G 0431-2009 | Steel products-Employer's qualification system for nondestructive testing (NDT) personnel |
170 | JIS G 0511-2006 | Stress corrosion cracking testing of metals and alloys using reverse U-bend test method |
171 | JIS G 0551-2013 | Steels-Micrographic determination of the apparent grain size |
172 | JIS G 0553-2008 | Steel-Macroscopic examination by etching |
173 | JIS G 0553-2012 | Amendment 1(追補1) |
174 | JIS G 0555-2003 | Microscopic testing method for the non-metallic inclusions in steel |
175 | JSA JIS G 0555 ERTA-2012 | 0 |
176 | JIS G 0556-1998 | Method of macro-streak-flaw test for steel |
177 | JIS G 0557-2006 | Methods of measuring case depth hardened by carburizing treatment for steel |
178 | JIS G 0558-2007 | Steels-Determination of depth of decarburization |
179 | JIS G 0559-2008 | Steel-Determination of case depth after flame hardening or induction hardening |
180 | JIS G 0560-2008 | Method of sulphur print for steel |
181 | JIS G 0561-2011 | Method of hardenability test for steel (End quenching method) |
182 | JIS G 0562-1993 | Method of measuring nitrided case depth for iron and steel |
183 | JIS G 0563-1993 | Method of measuring surface hardness for nitrided iron and steel |
184 | JIS G 0564-1999 | Metallic materials-Determination of plane-strain fracture toughness |
185 | JIS G 0566-1980 | Method of spark test for steels |
186 | JIS G 0567-2012 | Method of elevated temperature tensile test for steels and heat-resisting alloys |
187 | JIS G 0568-2006 | Eddy current testing method for steel products by encircling coil technique |
188 | JIS G 0571-2003 | Method of oxalic acid etching test for stainless steels |
189 | JIS G 0572-2006 | Method of ferric sulfate-sulfuric acid test for stainless steel |
190 | JIS G 0573-1999 | Method of 65 per cent nitric acid test for stainless steels |
191 | JIS G 0573-2012 | Amendment 1(追補1) |
192 | JIS G 0575-1999 | Method of copper sulfate-sulfuric acid test for stainless steels |
193 | JIS G 0575-2012 | Amendment 1(追補1) |
194 | JIS G 0576-2001 | Stress corrosion cracking test for stainless steels |
195 | JIS G 0576-2012 | Amendment 1(追補1) |
196 | JIS G 0577-2005 | Method of pitting potential measurement for stainless steels |
197 | JIS G 0578-2000 | Method of ferric chloride tests for stainless steels |
198 | JIS G 0579-2007 | Method of anodic polarization curves measurement for stainless steels |
199 | JIS G 0579-2012 | Amendment 1(追補1) ………………………………………… 1561 |
200 | JIS G 0580-2003 | Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels |
201 | JIS G 0581-1999 | Methods of radiographic examination for steel castings |
202 | JSA JIS G 0581 ERTA-2003 | 0 |
203 | JIS G 0582-2012 | Ultrasonic examination for steel pipes and tubes |
204 | JIS G 0583-2012 | Automated eddy current examination of steel pipes and tubes |
205 | JIS G 0584-2004 | Ultrasonic examination for arc welded steel pipes |
206 | JIS G 0585-2002 | Radiographic inspection for steel castings |
207 | JIS G 0587-2007 | Method for ultrasonic examination for carbon steel and low alloy steel forgings |
208 | JIS G 0588-1995 | Visual examination and classification of surface quality for steel castings |
209 | JIS G 0590-2005 | Method of critical pitting temperature measurement for stainless steels |
210 | JSA JIS G 0590 AMD 1-2013 | 0 |
211 | JIS G 0591-2000 | Method of sulfuric acid test for stainless steels |
212 | JIS G 0591-2012 | Amendment 1(追補1) |
213 | JIS G 0592-2002 | Method of determining the repassivation potential for crevice corrosion of stainless steels |
214 | JIS G 0593-2002 | Testing method for corrosion and scale inhibition performance of water treatment additives in cooling water system |
215 | JIS G 0594-2004 | Methods of accelerated cyclic corrosion resistance tests for anodic coatings with exposure to salt spray |
216 | JIS G 0595-2004 | Rating method of rust and stain of atmospheric corrosion for stainless steels |
217 | JIS G 0596-2010 | Method of corrosion test for stainless steel tube fittings |
218 | JIS G 0601-2012 | Testing methods for clad steel |
219 | JIS G 0602-1993 | Test methods for vibration-damping property in laminated damping steel sheets of constrained type |
220 | JIS G 0701-1957 | Symbols of forming ratio for steel forging |
221 | JIS G 0801-2008 | Ultrasonic testing of steel plates for pressure vessels |
222 | JIS G 0802-1998 | Ultrasonic examination of stainless steel plates |
223 | JIS G 0901-2010 | Classification of structural rolled steel plate and wide flat for building by ultrasonic test |
224 | JIS G 1201-2001 | Iron and steel-General rules for analytical methods |
225 | JIS G 2401-1979 | Classification standard for iron and steel scraps |
226 | JIS G 2402-2009 | Aluminium dross for iron and steel making … <DR,AOX> |
227 | JIS G 3201-1988 | Carbon steel forgings for general use ……………… <SF> |
228 | JIS G 3201-2008 | Amendment 1(追補1) |
229 | JIS G 3202-1988 | Carbon steel forgings for pressure vessels ………<SFVC> |
230 | JIS G 3202-2008 | Amendment 1(追補1) |
231 | JIS G 3203-1988 | Alloy steel forgings for pressure vessels for high-temperature service ……………………………………………<SFVA> |
232 | JIS G 3203-2008 | Amendment 1(追補1) ………………………………………… 2409 |
233 | JIS G 3204-1988 | Quenched and tempered alloy steel forgings for pressure vessels ……………………………………………<SFVQ> |
234 | JIS G 3204-2008 | Amendment 1(追補1) |
235 | JIS G 3205-1988 | Carbon and alloy steel forgings for pressure vessels for lowtemperature service ……………………………… <SFL> |
236 | JIS G 3205-2008 | Amendment 1(追補1) |
237 | JIS G 3206-1993 | High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service … |
238 | JIS G 3206-2008 | Amendment 1(追補1) |
239 | JIS G 3214-1991 | Stainless steel forgings for pressure vessels ……<SUS F> |
240 | JIS G 3214-2009 | Amendment 1(追補1) |
241 | JIS G 3221-1988 | Chromium molybdenum steel forgings for general use …………<SFCM> |
242 | JIS G 3221-2008 | Amendment 1(追補1) |
243 | JIS G 3222-1988 | Nickel chromium molybdenum steel forgings for general use……… <SFNCM> |
244 | JIS G 3222-2008 | Amendment 1(追補1) |
245 | JIS G 3223-1988 | High tensile strength steel forgings for tower flanges…………… <SFT> |
246 | JIS G 3223-2008 | Amendment 1(追補1) |
247 | JIS G 3251-1988 | Carbon steel blooms and billets for forgings …… <SFB> |
248 | JIS G 3251-2008 | Amendment 1(追補1) |
249 | JIS G 3251-2010 | Amendment 2(追補2) |
250 | JIS G 3320-1999 | Coated stainless steel sheets …………… <SUSC,SUSCD> |
251 | JIS G 3601-2012 | Stainless-clad steels …<R,BR,DR,WR,ER,B,D,W> |
252 | JIS G 3602-2012 | Nickel and nickel alloy clad steels …………………………<R,BR,DR,WR,ER,B,D,W> |
253 | JIS G 3603-2012 | Titanium clad steels ………………………… <R,BR,B> |
254 | JIS G 3604-2012 | Copper and copper alloy clad steels …………………………<R,BR,DR,WR,ER,B,D,W> |
255 | JIS G 4051-2009 | Carbon steels for machine structural use … <S××C,S××CK> |
256 | JIS G 4052-2008 | Structural steels with specified hardenability bands ……… |
257 | JIS G 4053-2008 | Low-alloyed steels for machine structural use …………………… |
258 | JIS G 4107-2007 | Alloy steel bolting materials for high temperature service … <SNB> |
259 | JIS G 4107-2010 | Amendment 1(追補1) |
260 | JIS G 4108-2007 | Alloy steel bars for special application bolting materials …<SNB> |
261 | JIS G 4108-2010 | Amendment 1(追補1) |
262 | JIS G 4303-2012 | Stainless steel bars ………………………………<SUS-B> |
263 | JIS G 4304-2012 | Hot-rolled stainless steel plate,sheet and strip ……………<SUS-HP,SUS-HS> |
264 | JIS G 4305-2012 | Cold-rolled stainless steel plate,sheet and strip …………<SUS-CP,SUS-CS> |
265 | JIS G 4308-1998 | Stainless steel wire rods ………………………<SUS-WR>… 2104 |
266 | JIS G 4308-2007 | Amendment 1(追補1) ………………………………………… 2112 |
267 | JIS G 4309-1999 | Stainless steel wires ………<SUS-W,SUSXM-W,SUH-W>… 2113 |
268 | JIS G 4311-2011 | Heat-resisting steel bars and wire rods ………………………<SUH-B,SUH-CB,SUH-WR> |
269 | JIS G 4312-2011 | Heat-resisting steel plate, sheet and strip ……………………<SUH-HP,SUH-CP,SUH-HS,SUH-CS> |
270 | JIS G 4313-2011 | Cold rolled stainless steel strip for springs ……<SUS-CSP> |
271 | JIS G 4314-1994 | Stainless steel wires for springs ………………<SUS-WP> |
272 | JIS G 4315-2000 | Stainless steel wires for cold heading and cold forging ……<SUS-WS> |
273 | JIS G 4316-1991 | Stainless steel wire rods for welding ……………<SUSY> |
274 | JIS G 4317-2005 | Hot-formed stainless steel sections ……………<SUS-HF> |
275 | JIS G 4318-1998 | Cold finished stainless steel bars ………………<SUS-CB> |
276 | JIS G 4318-2007 | Amendment 1(追補1) |
277 | JIS G 4319-1991 | Stainless steel blooms and billets for forgings … <SUS-FB> |
278 | JIS G 4320-2003 | Cold-formed stainless steel sections …………… <SUS-CF> |
279 | JIS G 4321-2000 | Stainless steel for building structure ……… <SUS,SCS-CF> |
280 | JIS G 4322-2008 | Stainless steel bars for concrete reinforcement ………………<SUS×××-SD> |
281 | JIS G 4901-1999 | Corrosion-resisting and heat-resisting superalloy bars………<NCF-B> |
282 | JIS G 4901-2008 | Amendment 1(追補1) ………………………………………… 2313 |
283 | JIS G 4902-1991 | Corrosion-resisting and heat-resisting superalloy plates and sheets ……………………………………………<NCF-P> |
284 | JIS G 5101-1991 | Carbon steel castings ……………………………… <SC> |
285 | JIS G 5102-1991 | Steel castings for welded structure ……………… <SCW> |
286 | JIS G 5111-1991 | High tensile strength carbon steel castings and low alloy steel castings for structural purposes ……… |
287 | JIS G 5121-2003 | Corrosion-resistant cast steels for general applications …… <SCS> |
288 | JIS G 5122-2003 | Heat-resistant cast steels and alloys for general applications…… <SCH> |
289 | JIS G 5131-2008 | High manganese steel castings … <SCMnH,GX×××Mn> |
290 | JIS G 5151-1991 | Steel castings for high temperature and high pressure service…<SCPH> |
291 | JIS G 5152-1991 | Steel castings for low temperature and high pressure service……<SCPL> |
292 | JIS G 5201-1991 | Centrifugally cast steel pipes for welded structure …………………<SCW-CF> |
293 | JIS G 5202-1991 | Centrifugally cast steel pipes for high temperature and high pressure service ………………………………<SCPH-CF> |
294 | JIS G 5501-1995 | Grey iron castings ………………………………… <FC> |
295 | JIS G 5502-2001 | Spheroidal graphite iron castings ……………… <FCD> |
296 | JIS G 5502-2007 | Amendment 1(追補1) ………………………………………… 2627 |
297 | JIS G 5503-1995 | Austempered spheroidal graphite iron castings …<FCAD> |
298 | JIS G 5504-2005 | Heavy-walled ferritic spheroidal graphite iron castings for low temperature service ……………………… <FCD-LT> |
299 | JIS G 5510-2012 | Austenitic iron castings ………………… <FCA,FCDA> |
300 | JIS G 5511-1991 | Low thermal expansive Fe-alloy castings …………………<SCLE,FCLE,FCDLE> |
301 | JIS G 5526-1998 | Ductile iron pipes ………………………………<D,DPF> |
302 | JIS G 5527-1998 | Ductile iron fittings* …………………………… <FCD> |
303 | JIS G 5528-1984 | Epoxy-powder coating for interior of ductile iron pipes and fittings |
304 | JIS G 5528-2006 | Amendment 1(追補1) |
305 | JIS G 5705-2000 | Malleable iron castings ………<FCMW,FCMB,FCMP> |
306 | JIS G 5903-1975 | Cast shot and grit………………………………… <G,S> |
307 | JIS G 5904-1966 | Testing method of cast shot and grit grain size |
308 | JIS G 7821-2000 | Cast carbon steels for general engineering purposes |
309 | JIS Q 1001-2009 | Conformity assessment-Conformity assessment for Japanese Industrial Standards-General guidance on a third-party certification system for products |
310 | JIS Q 1013-2009 | Conformity assessment-Conformity assessment for Japanese Industrial Standards-Guidance on a third-party certification system for steel products |
311 | JIS Z 2241-2011 | Metallic materials-Tensile testing-Method of test at room temperature |
312 | JIS Z 2242-2005 | Method for Charpy pendulum impact test of metallic materials |
313 | JIS Z 2243-2008 | Brinell hardness test-Test method |
314 | JIS Z 2244-2009 | Vickers hardness test-Test method |
315 | JIS Z 2245-2011 | Rockwell hardness test-Test method |
316 | JIS Z 2246-2000 | Shore hardness test-Test method |
317 | JIS Z 2247-2006 | Method of Erichsen cupping test |
318 | JIS Z 2248-2006 | Metallic materials-Bend test |
319 | JIS Z 2249-2010 | Method of conical cup test |
320 | JIS Z 2251-2009 | Knoop hardness test-Test method |
321 | JIS Z 2253-2011 | Metallic materials-Sheet and strip-Determination of tensile strain hardening exponent |
322 | JIS Z 2254-2008 | Metallic materials-Sheet and strip-Determination of plastic strain ratio |
323 | JIS Z 2256-2010 | Metallic materials-Hole expanding test |
324 | JIS Z 2271-2010 | Metallic materials-Uniaxial creep testing in tension-Method of test |
325 | JIS Z 2276-2012 | Method of tensile stress relaxation test for metallic materials |
326 | JIS Z 2305-2001 | Non-destructive testing―Qualification and certification of personnel |
327 | JIS Z 2319-1991 | Methods for magnetic leakage flux testing |
328 | JIS Z 2320-1-2007 | Non-destructive testing-Magnetic particle testing-Part 1-General principles |
329 | JIS Z 2320-2-2007 | Non-destructive testing-Magnetic particle testing-Part 2-Detection media |
330 | JIS Z 2320-3-2007 | Non-destructive testing-Magnetic particle testing-Part 3-Equipment |
331 | JIS Z 2343-1-2001 | Non-destructive testing―Penetrant testing―Part 1-General principles―Method for liquid penetrant testing and classification of the penetrant indication |
332 | JIS Z 2344-1993 | General rule of ultrasonic testing of metals by pulse echo technique |
333 | JIS Z 2345-2000 | Standard test blocks for ultrasonic testing |
334 | JIS Z 2355-2005 | Methods for measurement of thickness by ultrasonic pulseecho technique |
335 | JIS Z 2356-2006 | Method of automatic ultrasonic inspection for graphite ingot |
336 | JIS G 3452-2010 | |
337 | JIS G 3454-2012 | |
338 | JIS G 3455-2012 | |
339 | JIS G 3456-2010 | |
340 | JIS G 3457-2012 | |
341 | JIS G 3458-2013 | |
342 | JIS G 3459-2012 | |
343 | JIS G 3460-2013 | |
344 | JIS H 3300-2012 |
或许你还对下面的文章感兴趣
- JIS日本钢铁标准1(2013-8-21 8:9:37)