海量最新、最全国外技术标准原文、中文版速递——>点击
首页 > 法国标准 > 正文

NF 标准数据库参考目录 28

发布-leeglee | 查看- | 发表时间-2010/6/29
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)

 

 NF G62-800-2002 鞋类.样品和试件的抽样位置、制备和调试持续时间页
NF G83-001-1970 皮革加工机用圆形刀 1页
NF G83-100-1997 鞋、皮革和仿皮革制品生产机械--粗加工、打磨、抛光和精整机械 36页
NF G83-101-1997 制鞋机械--钳邦机械--安全要求 25页
NF G83-102-1999 制鞋机械.靴模机的安全要求页
NF G83-106-1999 鞋类、皮革和仿皮生产机.敲钉子机.安全要求页
NF G83-120-2000 鞋类.皮革和仿皮制品加工机器.噪声试验规程.共同要求 12页
NF G90-001-1978 缝纫机。机器型号的分类和术语 8页
NF G90-051-1975 家用缝纫机。缝合能力试验 2页
NF G90-052-1975 家用缝纫机。针线拉紧器可靠性试验 2页
NF G90-053-1975 家用缝纫机。针脚长度调整器的可靠性试验 2页
NF G90-054-1976 家用缝纫机。外罩抗冲击强度试验 3页
NF G90-055-1976 家用缝纫机。外罩的闭锁装置和手柄的强度的测定 2页
NF G90-056-1977 家用缝纫机。同一布料两种厚度缝合时的滑动试验 3页
NF G90-057-1977 家用缝纫机。针脚长度的不均匀性试验 3页
NF G90-058-1977 家用缝纫机。方向稳定性试验方法 3页
NF G91-000-1979 拉锁。词汇。综合 12页
NF G91-005-1984 拉锁。试验方法。机械特性 8页
NF G91-006-1984 拉锁。分类。机械特性 6页
NF G91-010-1979 拉锁。洗涤后长度变化的测定 2页
NF G91-012-1981 拉锁。耐洗涤染色牢度试验 9页
NF G91-013-1981 拉锁。耐干洗染色牢度试验 4页
NF G91-101-1990 自锁扣.定义 6页
NF G91-102-1990 自锁扣.构造性能.试验方法 8页
NF G91-103-1990 自锁扣.机械强度性能.试验方法 10页
NF G91-104-1990 自锁扣.染色牢度性能.染色牢度试验 4页
NF G91-105-1999 粘扣.水洗、干燥和干洗中尺寸变化的测定 6页
NF G91-106/A1-2000 粘贴锁紧件.跟踪检验用循环程序 9页
NF G91-106-1997 自锁扣.使用适应性能.试验方法 8页
NF G91-107-1997 自锁扣.详细性能.试验方法 10页
NF G91-108-1997 自锁扣.弯曲性测定 7页
NF G91-109-1997 自锁扣--带扣全宽度和有效宽度以及闭合有效宽度的测定 7页
NF G91-110-1999 搭扣.水洗、干燥或干洗前的锁紧方法 8页
NF G91-111-1999 搭扣.剥离强度的测定 11页
NF G92-001-1993 学校小背包和书包.定义.要求 9页
NF G92-002-1989 学校小背包和书包.试验方法.产品构成材料撕裂必需力的测定 8页
NF G92-003-1989 学校小背包和书包.试验方法.薄片(膜)柔软材料缝纫连接抗拉断性能的测定 7页
NF G92-004-1989 学校小背包和书包.试验方法.薄片柔软材料缝纫连接间断点拉裂必需力的测定 6页
NF G92-005-1989 学校小背包和书包.试验方法.背带拉断或包体上固定物扯下所必需力的测定 5页
NF G92-006-1989 学生书包.试验方法.关闭装置扯开或开口必需力的测定.快速解扣式带扣 5页
NF G92-007-1989 学校小背包和书包.试验方法.将携带拉手扯下所必需力的测定 5页
NF G92-008-1989 学校小背包和书包.试验方法.负荷循环机械应力的测定 5页
NF H00-001-1981 出口包装的标记 6页
NF H00-002-1997 包装--触摸危险警告--要求 11页
NF H00-004-1999 包装.货物搬运的图形标志(EN ISO 780) 12页
NF H00-005-1989 包装。运输包装尺寸 5页
NF H00-008-1971 水果和蔬菜用平行六面体包装。外形尺寸 2页
NF H00-013-1971 地面运输车辆新鲜水果和蔬菜平行六面体包装的排列方法 4页
NF H00-014-1975 包装、术语和分类包装型式(分别列表) 13页
NF H00-015-1986 包装。包装的使用循环。术语 5页
NF H00-017-1993 包装.整体,满载的运输包装.水浸试验 6页
NF H00-030-2001 纸张材料.水蒸气传送率的测定.重量分析(盘)法 18页
NF H00-031-1-1993 整体,满载的运输包装.编制性能试验程序的一般规则.第1部分:总则 10页
NF H00-031-2-1993 整体,满载的运输包装.编制性能试验程序的一般规则.第2部分:定量数据 20页
NF H00-032-1993 包装.整体,满载的运输包装.试验时部位的识别 6页
NF H00-036-1993 包装.整体满载的运输包装.滚动试验 6页
NF H00-037-1993 包装.整体.满载的运输包装.倾翻试验 8页
NF H00-038-1971 包装。不透油程度的测定 2页
NF H00-040-2001 包装.满包装运输包装件和单元装载.试验的调节 10页
NF H00-041-1993 包装. 整体,满载的运输包装.使用静载荷的堆码试验 6页
NF H00-042-1-1993 包装.整体,满载的运输包装.跌落法垂直冲击试验 7页
NF H00-042-2-1990 包装.满装运输包装.翻倒落下垂直冲撞试验 6页
NF H00-043-1993 包装.整体,满载的运输包装.固定低频的振动试验 6页
NF H00-045-2001 包装.满装运输包装件.利用压缩试验机的压缩和堆码试验 11页
NF H00-047-1993 包装.整体,满载的运输包装.水平冲击试验(水平或斜面试验:吊摆试验) 7页
NF H00-048-2002 包装.整体满载的运输包装.低压试验页
NF H00-049-1993 包装.整体满载的运输包装.喷淋试验 6页
NF H00-054-1978 集体食堂设备。基本尺寸 10页
NF H00-055-1980 花束的运输包装。尺寸。规范 8页
NF H00-056-1993 整体,满载的运输包装.分发检验.要记录的信息 7页
NF H00-057-1990 包装.满装运输包装.滚筒冲击试验 8页
NF H00-058-1990 包装.满装运输包装.局部压力试验 5页
NF H00-059-1990 包装.满装运输包装.局部冲击试验 5页
NF H00-060-1991 包装.完全和满装运输包装物.试验计划 35页
NF H00-061-1980 某些预装食品用包装、玻璃和金属容器的容量 9页
NF H00-070-1983 液体运输包装。危险品运输用组合包装内部容器、混合包装金属或塑料桶。空气密封试验。操作方式 4页
NF H00-071-1986 液体运输包装。轻金属包装。金属或塑料包装。混合包装。液压试验。操作方式 6页
NF H00-080-1992 包装.完全装满的运输包装.静荷载与机械外应力堆积试验 6页
NF H00-081-2002 包装.整体,满载的运输包装.采用正弦变频的的振动试验页
NF H00-082-1991 包装.完成实心包装.控制的水平撞击试验 13页
NF H00-083-2001 包装.满装运输包装件.包装件重心测定的试验方法 11页
NF H00-111-2005 Packing for dangerous substances - Resealable packing for solid products - Test method. 8页
NF H00-201-1993 防小孩拆开的包装.可再包装件的要求和试验方法 16页
NF H00-202-2001 包装.防儿童的包装.非药物产品用不能再次封闭的包装件的要求和检验程序 28页
NF H00-300-1994 工业包装 工业包装定义用的信息采集 15页
NF H00-310-1988 工业包装.水蒸汽传导系数微弱(P<0.3G/M2.24h)的柔软和热密封材料 32页
NF H00-311-1-1992 工业包装.柔软和热密封保护材料.具有1g/m2.24h 1g/m2.24h 水蒸汽传导系数的聚乙烯基单层材料 10页
NF H00-312-1987 工业包装。不透水和油的自动粘着软防护材料 17页
NF H00-313-1995 物品防静电放电和电磁场的软包装.性能和试验方法 68页
NF H00-320-1988 包装.脱水剂产品.规范和试验 12页
NF H00-321-1989 包装.脱水剂袋.规范和试验 14页
NF H02-011-2001 包装.重物的提升、捆绑和固定用拉伸钢索规范 9页
NF H02-012-2001 包装.拉力钢捆绑带规范 13页
NF H02-015-2001 包装.非金属受拉捆绑带的规范 12页
NF H02-020-2001 包装.边角保护器规范 9页
NF H03-001-1968 木料包装。词汇 19页
NF H03-003-1-1990 木材包装.用于运输新鲜水果和蔬菜的托盘型直角平行六面形包装物.第1部分:单个包装物的技术要求和试验 9页
NF H03-003-2-1990 木材包装.用于运输新鲜水果和蔬菜的托盘型直角平行六面形包装物.第2部分:在托盘上货物进行的试验程序 5页
NF H11-001-1993 包装.袋子.词汇和类型.第1部分:纸袋 28页
NF H11-002-1993 包装.袋子.测量说明和方法.第1部分:空纸袋 9页
NF H11-003-1993 包装.袋子.跌落试验.第1部分:纸袋 12页
NF H11-004-1993 包装.袋子.试验的状态调节.第1部分:纸袋 6页
NF H11-005-1987 纸包装、水果袋。规范和试验 10页
NF H11-006-1993 包装.袋子.试验用空袋的取样方法 6页
NF H11-007-1994 援助食品运输用袋.纸制袋 9页
NF H11-008-1993 纸包装 垃圾箱袋和大箱袋 规范和试验 11页
NF H11-009-1996 包装.通用包装袋尺寸公差.纸袋 7页
NF H11-010-1996 包装.袋规范方法.第1部分:纸袋 9页
NF H13-000-1961 词汇 15页
NF H13-001-1990 包装. 瓦楞纸包装箱.压力试验 6页
NF H13-006-1973 纸板包装。水果和蔬菜用平行方面体包袋。尺寸。规范。试验 6页
NF H13-007-1989 纸板包装.新鲜水果用平行六面体包装.苹果/梨纸板箱规范,试验.文件指南 11页
NF H13-010-1978 洗衣粉和去污粉的包装。纸板箱和纸板桶的尺寸和容积 7页
NF H13-020-1984 危险品包装用全敞口无外部包装的纸板桶。机械和物理特性。试验 9页
NF H13-021-2000 纤维板鼓形桶.带有封闭环的标称容量为15-250升的可拆盖的鼓形桶 15页
NF H13-042-1975 大容量纸袋。尺寸规范 12页
NF H13-043-1978 大容量纸袋。带垫板和挡板纸袋的尺寸和容积系列 4页
NF H13-045-1980 薄纸板包装.瓦楞纸板包装规范的起草指南 7页
NF H13-046-1980 瓦楞纸板包装的封闭和开启方法 7页
NF H20-005-1968 海运零件用箱壁完整的锯材钉制箱 13页
NF H20-008-1980 单独装运包装的提取装置 4页
NF H21-026-1993 薄木材包装.运输牡蛎用轻型木材包装 9页
NF H31-100-1999 薄金属容器.定义和尺寸、容量的测定.第2部分:普通用途容器(EN ISO 90-2) 26页
NF H31-251-1975 桶口和相应的密闭件 4页
NF H31-341-2000 钢桶.上升口(端口可卸的)钢桶,总容量为213升 12页
NF H31-342-2000 钢桶.部分敞口圆桶,总容量为216.5升 14页
NF H31-343-2000 总容量为17-230升的鼓形钢桶用插入法兰型封闭系统 42页
NF H31-344-2000 钢制鼓形桶.标称容量为20-60升的非移动头式鼓形桶 15页
NF H31-345-2000 钢制鼓形桶.标称总容量为230升的不可拆盖式鼓形桶 14页
NF H31-346-2000 钢制鼓形桶.标称容量是15-62升的盖可移头式鼓形桶 13页
NF H31-353-1975 可堆放的小圆桶。全敞口 3页
NF H31-354-1975 可堆放的轻型圆桶。部分敞口 3页
NF H31-355-1975 可堆放的轻型圆桶。全敞口 3页
NF H31-356-1975 可堆放的轻型圆桶。部分敞口 3页
NF H31-357-1986 全敞口圆桶。尺寸 6页
NF H31-358-1986 部分敞口圆桶。尺寸 6页
NF H31-359-1990 金属包装.穿孔 4页
NF H31-362-1987 金属包装。部分敞口的盒 5页
NF H31-363-1987 金属包袋。塑料细颈瓶用平预或锥形穿孔圆桶 3页
NF H31-364-1990 金属包装.平行六面体长方形罐 5页
NF H31-365-1990 金属包装。平行六面体长方形罐--小汽车类--2升 5页
NF H31-366-1987 金属包装。称作“载重车”的可套装、可堆放的截锥型桶 7页
NF H31-368-1984 危险品运输用包装。金属桶。坠落试验。操作方式 5页
NF H31-400-2000 包装.轻金属包装.一般用途、容量达40000毫升的锥形和圆柱金属容器的标称填充容量 9页
NF H31-401-2001 包装.薄金属包装.最高达30000ml的锥形、圆柱形和非圆形通用金属容器的标称填充容量 10页
NF H31-410-2001 包装.薄金属包装.根据标称总装盖容量定义的顶开口圆形罐 9页
NF H31-411-2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes页
NF H31-412-2001 包装.薄金属包装.插入式塑料封盖的孔径 8页
NF H33-001-1990 食品用密封金属容器.罐头.几何性能 7页
NF H33-004-1999 金属薄壁容器.尺寸和容量的定义与测定方法.第1部分:顶开口罐头 24页
NF H33-006-1989 金属包装.碳酸饮料用密封金属容器.名称符号与尺寸特性 4页
NF H33-507-1987 金属包装。称作“桶”的饼干盒塑料包装 3页
NF H34-002-1980 危险品用无外部包装的塑料容器。机械和物理特性。试验 12页
NF H34-003-1973 塑料包袋。水和蔬菜平行六面体包装。尺寸。规范。试验 5页
NF H34-005-1987 塑料包装。开口或有挡板的大容量袋。平直或折叠式。规范和试验 10页
NF H34-007-1977 未增强塑料桶。材料和使用方法 5页
NF H34-008-1977 未增强塑料桶。检验卡式样 2页
NF H34-010-1986 塑料包装。安全带袋。规范和试验 11页
NF H34-011-1990 塑料包装.最大净重为75公斤的织袋 7页
NF H34-012-2001 非危险货物用柔性中间散装集装箱(FIBCs)规范 35页
NF H34-013-1995 用于运送食品的包装袋.机织聚丙烯织物制成的包装袋页
NF H34-015-1987 塑料包装。消费品塑料袋(工具袋和安全带袋除外)规范和试验。 12页
NF H34-016-1994 援助食品运输用袋.聚乙烯薄膜制袋 10页
NF H34-017-1994 援助食品运输用袋.复合材料薄膜制管形袋 11页
NF H34-018-1994 援助食品运输用袋.除单独使用的聚丙烯外的纺织聚烯烃制袋 11页
NF H34-019-1994 援助食品运输用袋.纺织棉花/聚烯烃布制袋 11页
NF H34-020-1989 塑料包装.水果和蔬菜用可重新使用型平行六面体包装.规格和试验 14页
NF H34-021-1994 援助食品运输用袋.双层棉布制袋 10页
NF H34-022-1994 援助食品运输用袋.纺织麻/聚烯烃布制袋 11页
NF H34-023-1994 援助食品运输用袋.麻布制袋 10页
NF H34-024-1995 援助食品运输用袋.对根据所要包装产品选择袋类型和衬里的建议 10页
NF H34-025-2000 标称容量为20-225升的塑料容器用塞子和桶盖封闭系统 16页
NF H34-026-2000 塑料鼓形桶.标称容量为20-120升的非移动盖圆截面鼓形桶 15页
NF H34-027-2000 塑料鼓形桶.标称容量为210升、220升和225升的非移动盖鼓形桶(密封盖) 14页
NF H34-030-1993 包装.袋子.词汇和类型.第2部分:热塑软性薄膜袋 20页
NF H34-031-1993 包装.袋子.测量说明和方法.第2部分:热塑软性薄膜空袋 8页
NF H34-032-1-2000 运输包装.可重复使用的硬质塑料配送盒.第1部分:一般用途的应用 17页
NF H34-032-2-2000 运输包装.可重复使用的硬质塑料配送盒.第2部分:试验的通用规范 11页
NF H34-033-1996 包装.通用包装袋的尺寸公差.第2部分:热塑性塑料软薄膜制成的包装袋 7页
NF H34-034-1996 包装.袋规范方法.第2部分:可弯曲热塑薄膜袋 8页
NF H34-035-1996 装.跌落试验.第2部分:可弯曲热塑薄膜袋 15页
NF H34-036-2000 公称容积20l至60l的塑料容器用螺帽闭合系统 12页
NF H34-037-2000 塑料汽油桶.托板尺寸为800mm x 1200mm,1000mm x 1200mm,1140mm x 1140mm的优先选用的20升和60升标称容量的汽油桶 15页
NF H34-039-2000 塑料鼓形桶.标称容量为25升至220升的可移动盖(非密封盖)鼓形桶 12页
NF H34-040-1-2000 包装.小负荷搬运系统.第1部分:一般要求和试验方法 20页
NF H34-040-2-2000 包装.小负荷搬运系统.第2部分:柱形可堆码系统 23页
NF H34-040-3-2000 包装.小负荷搬运系统.第3部分:成捆可堆码系统 39页
NF H34-050-1-2000 包装.柔性圆柱形塑料管.尺寸和公差 7页
NF H34-050-1998 包装.软管.术语(欧洲包装EN 12374) 18页
NF H34-050-2-2000 包装.柔性圆柱形金属管.尺寸和公差 8页
NF H34-050-3-2001 包装.圆柱形柔性层压管.尺寸和公差 9页
NF H34-050-4-2000 包装.柔性圆锥形金属管.尺寸和公差 9页
NF H34-055-1998 包装.柔性铝管.壁厚测量方法 6页
NF H34-056-2000 包装.柔性铝管.内漆膜的测量方法 8页
NF H34-058-1998 包装.软管.外壳空气密实度试验方法(欧洲标准12377) 6页
NF H34-062-2001 包装.热塑性塑料软薄膜制造的包装袋.边缘折叠处的撕裂蔓延 13页
NF H34-093-2006 Plastics sacks - Sacks made from thermoplastic flexible film - Determination by calculation of the useful volume of sacks. 16页
NF H35-000-1975 量瓶 7页
NF H35-005-1994 玻璃瓶.垂直度的试验方法 6页
NF H35-006-1994 玻璃瓶.瓶口至瓶底的高度和平行度.试验方法 9页
NF H35-007-1994 粗颈玻璃瓶.顶部密封表面平面度偏差--试验方法 6页
NF H35-022-1995 制瓶工业--玻璃瓶--.玻璃瓶口--26至43mm顶部绳--悬挂点<页
>外部轮廊结构--几何和尺寸页
4页
NF H35-023-1973 压力壶的螺纹瓶口 4页
NF H35-024-1986 塞紧或啮合的瓶盖用26、29、32、36、44型的塑料瓶口。尺寸 3页
NF H35-027-1972 葡萄酒瓶口 1页
NF H35-028-1995 制瓶工业--玻璃瓶--香槟酒玻璃瓶口--尺寸 4页
NF H35-029-1995 制瓶工业--玻璃瓶--香槟酒玻璃冠形盖瓶口26和29 6页
NF H35-032-1972 齿冠形瓶塞用26型和29型塑料瓶口 3页
NF H35-036-1984 “香料”型塑料瓶螺纹瓶口尺寸 2页
NF H35-037-1987 制瓶工业。“药剂”型塑料瓶的螺纹瓶口。尺寸 3页
NF H35-041-2006 制瓶工业--玻璃瓶--75cl《压力型》瓶 6页
NF H35-048-1980 “香料”型玻璃瓶螺纹瓶口 3页
NF H35-049-1978 “药剂”型玻璃瓶螺纹瓶口 2页
NF H35-050-1975 “欧罗巴”玻璃瓶口 2页
NF H35-053-2006 制瓶工业--玻璃瓶--75cl轻型"Flute d'Alsace"葡萄酒瓶 6页
NF H35-054-1977 玻璃瓶。“阿伯里那利斯”瓶 3页
NF H35-055-1977 玻璃瓶. 75cl标准啤酒瓶 3页
NF H35-056-2006 装瓶业.玻璃瓶.75cl香槟瓶 7页
NF H35-057-1977 玻璃瓶。“B.V.L”型瓶 3页
NF H35-060-2006 制瓶工业--玻璃瓶--容量为1升的:六星"瓶 6页
NF H35-061-1984 玻璃瓶。手状酒瓶 3页
NF H35-065-1990 制瓶工业.扁瓶用塑料螺纹瓶口 7页
NF H35-066-1990 制瓶工业.塑料螺纹口--起泡饮料用,螺纹1,直径28和31 4页
NF H35-067-1990 制瓶工业.带去气孔的起泡饮料用螺纹1.直径28的塑料螺纹瓶口 6页
NF H35-068-1991 装璃工业.玻璃瓶.螺旋压力玻璃瓶口31 5页
NF H35-069-1977 玻璃瓶。不可变压力螺旋瓶口 2页
NF H35-071-1991 制瓶工业.玻璃瓶.环形瓶塞和预制可撕开金属瓶盖用玻璃口38和低口43 4页
NF H35-072-1991 制瓶工业.玻璃瓶.环形瓶塞和预制可撕开金属瓶盖用玻璃口38和高口43 4页
NF H35-073-1977 内服或外用标准药瓶 3页
NF H35-076-1977 玻璃瓶。标记 3页
NF H35-077-1977 玻璃瓶。尺寸比和公差 4页
NF H35-078-1977 玻璃瓶。合气体饮料用瓶。牢度 1页
NF H35-080-2006 制瓶工业.玻璃瓶.玻璃螺纹环形低瓶口26--尺寸 7页
NF H35-081-1991 装瓶工业.玻璃瓶.27,29,34塞头堵塞--玻璃瓶口--复合材料塞头--超堵塞金属瓶盖 6页
NF H35-082-1991 装瓶工业.小玻璃瓶.容量和尺寸的容差 10页
NF H35-083-1980 玻璃瓶。37.5cl“阿尔萨斯长笛”瓶 3页
NF H35-085-1991 装瓶工业.玻璃瓶.<<29毫米185>>玻璃瓶口--尺寸 4页
NF H35-088-1991 装瓶工业.玻璃螺旋瓶口.小玻璃瓶的制造--螺旋线凹槽 3页
NF H35-089-1993 瓶装工业--铝啤酒桶,圆筒形--特性 7页
NF H35-090-1986 食油专用塞紧或啮合瓶盖用29/51和35/25型塑料瓶口。尺寸 3页
NF H35-092-1991 装瓶工业.广口玻璃容器(螺纹口) 5页
NF H35-093-1991 装瓶工业.广口玻璃容器.(高嵌入口) 5页
NF H35-095-1991 装瓶工业.广口玻璃瓶.嵌入玻璃口 5页
NF H35-096-1991 装瓶工业.广口玻璃瓶.低嵌入口 6页
NF H35-098-1991 制瓶工业.玻璃瓶.瓶颈为29mm的玻璃平口--尺寸 5页
NF H35-100-2000 包装.软木塞及压封瓶盖用孔口直径为18.5mm的软木塞瓶口 7页
NF H35-101-1991 制瓶工业.玻璃瓶.装静液用直径29,开口度21的玻璃倾倒瓶口(Verplast)-尺寸 9页
NF H35-102-1991 制瓶工业.玻璃瓶.装静液用直径32,开口度24的玻璃倾斜瓶口 (Verplast)--尺寸 7页
NF H35-103-1993 装瓶工业.酒瓶.BVP非碳化制品的玻璃螺纹研磨.尺寸 13页
NF H35-104-1992 制瓶工业--称为"α-2000糖浆瓶的内服或外用液体标准玻璃药瓶--尺寸 7页
NF H35-106-1997 制瓶工业--玻璃瓶--在密封容器中产生气酒用的瓶口29--尺寸 4页
NF H35-107-1995 制瓶工业--玻璃瓶--内压力瓶的28mm螺旋瓶口 6页
NF H35-109-1997 制瓶工业--玻璃瓶--苹果酒压力型冠形瓶1229-尺寸 4页
NF H35-111-1996 装瓶业.玻璃瓶.环形金属瓶盖 26mm 4页
NF H35-120-2006 Bottling industry - Glass bottles - 75 cl "Non-returnable Bourgogne" bottle. 7页
NF H35-121-2006 Bottling industry - Glas bottles - 75 cl "Non-returnable Bordeaux" bottle. 7页
NF H35-122-2006 Bottling industry - Glass bottle - 75 cl "Traditionnal method" bottle. 6页
NF H35-123-2006 Bottling industry - Glass bottles - "Bourgogne traditional" 75 cl bottle. 6页
NF H35-124-2006 Bottling industry - Glass bottles - "Bordeaux traditional" 75 cl bottle. 6页
NF H44-001-1981 烟雾发生器。术语 5页
NF H44-002-2001 轻型金属容器.定义和尺寸、容量的测定.第3部分:气溶胶罐 21页
NF H44-007-1988 气雾剂发生器。金属容器。25.4孔径3件容器的尺寸(钢制) 7页
NF H44-008-1986 气雾剂发生器。玻璃容器。15毫米瓶口的尺寸 2页
NF H44-009-1986 气雾剂发生器。玻璃容器。18毫米瓶口尺寸 2页
NF H44-010-1986 气雾剂发生器。玻璃容器。20毫米玻璃瓶口尺寸 2页
NF H44-016-1988 压力分配容器(气雾剂容器型)。铝制20毫米容器瓶口尺寸 1页
NF H44-017-1988 气雾剂发生器。金属容器。铝制25.4毫米容器尺寸 5页
NF H44-018-1988 压力分配容器(气雾剂容器型)。25.4毫米孔径容器。平行度的定义和测定 4页
NF H44-020-1988 压力分配容器(气雾剂容器型)。气雾剂容器上阈门的机械密封和安装的快速试验 3页
NF H44-021-1991 气雾剂发生器.气雾剂包装内压力测量 4页
NF H44-022-1986 气雾剂发生器。圆筒容器。管帽座高度的定义和测量方法 4页
NF H44-023-1980 气雾剂发生器。内部压力的真空容器的阻力 3页
NF H44-024-1988 气雾剂发生器。气雾剂发生器长期储存试验和质量损失测定 5页
NF H44-025-1991 气雾剂发生器.气雾剂列式液相占据的容积测定 7页
NF H44-026-1991 气雾剂发生器.阀门流量的测量 6页
NF H44-027-1991 气雾剂发生器.雾化形状的评价 8页
NF H44-032-1986 气雾剂发生器。玻璃容器。17毫米瓶口尺寸 2页
NF H44-033-1986 气雾剂发生器。玻璃容器。13毫米瓶口尺寸 2页
NF H44-034-1986 气雾剂发生器。玻璃容器。11毫米瓶口尺寸 2页
NF H44-035-1987 气雾剂发生器。金属容器。内部压力阻力的测定 4页
NF H44-037-1987 气雾剂发生器。非保护性玻璃容器。坠落试验 6页
NF H44-038-1986 气雾剂发生器. 金属容器。20毫米瓶口铝制容器尺寸 4页
NF H48-003-1975 手提行李。规范和试验 4页
NF H48-004-1975 手提行李。术语 2页
NF H50-000-1999 托盘。术语及定义 47页
NF H50-002-1962 装料台.专用托盘 4页
NF H50-004-1983 一般重复使用的平托盘。机械试验程序 3页
NF H50-006-1960 木制托盘的制造特性 2页
NF H50-007-1962 一般用箱式托盘 4页
NF H50-010-1-1996 托盘组件的试验方法.第1部分:钉和其它销钉型固定件以及U形钉弯曲强度的测定 11页
NF H50-010-2-2000 托盘接头的试验方法.第2部分:托盘钉子和U形钉抗拔出和钉头拉穿的测定 17页
NF H50-011-2002 托盘上部结构.托盘环.试验方法和性能要求 23页
NF H50-501-1-1999 滚装集装箱.第1部分:术语 16页
NF H50-501-2-2002 滚装集装箱.第2部分:设计和安全通用原则页
NF H50-502-1989 轮盘集装箱.试验方法 21页
NF H50-510-1-1998 蓝式手推车.第1部分:有或无携带孩子功能的蓝式手推车的要求和试验 21页
NF H60-000-2000 包装.包装和环境.术语 15页
NF H60-001-2002 Packaging - Marking and material identification system 10页
NF H60-003-1996 Packaging. Recommendations for conducting life-cycle inventory analysis of packaging systems. 18页
NF H60-004-2001 Packaging - Report on criteria and methodologies for life cycle analysis of packaging 20页
NF H60-005-2000 Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste 13页
NF H60-100-2000 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction 24页
NF H60-110-2001 Packaging - Reuse 18页
NF H60-120-2000 Packaging - Requirements for packaging recoverable by material recycling 17页
NF H60-121-2000 Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling 18页
NF H60-127-2000 Packaging - Material recovery - Criteria for a minimum content of recycled material 21页
NF H60-130-2000 Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value 17页
NF H60-131-2001 Packaging - Optimization of energy recovery from packaging waste 27页
NF H60-140-2000 包装.对通过合成和生物降解产生的可回收包装材料的要求 .包装材料最终验收的试验计划和评价标准 24页
NF H60-150-2000 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging in their release into the environment - Part 1 : requirements for measuring and verifying the four heavy metals present in pack 60页
NF H60-151-2002页
NF H60-300-1994 包装.旧包装的能量回收 23页
NF H90-001-1984 商品运输用集装箱。术语 24页
NF H90-002-1993 货运集装箱.系列1。分类、尺寸和最大额定容量 11页
NF H90-003-1993 货运集装箱 系列1.规范和试验.第1部分:一般用途货物集装箱 33页
NF H90-005-1984 集装箱。系列1。包角件。规范 15页
NF H90-006-1996 商品运输用集装箱.编码、识别和标志 29页
NF H90-007-1992 货运集装箱系列1--规范和试验--第4部分:盛干散货的不密封集装箱 38页
NF H90-008-1992 货运集装箱系列1--规范和试验--第3部分:盛液体, 气体和密封干散货的罐式集装箱 33页
NF H90-009-1993 货运集装箱 系列1.规范和试验.第5部分:平台型集装箱 44页
NF H90-015-1997 系列1集装箱 规范和试验 第2部分: 保温集装箱 61页
NF H90-016-1993 货运集装箱 系列1.搬运和固定 35页
NF H90-020-1990 运输商品用集装箱.有关集装箱数据的交换.第1部分:一般通信电码 63页
NF H90-025-1-1991 货物运输用集装箱.有关船载集装箱的信息.第1部分:载重量图系统 7页
NF H90-025-2-1991 货物运输用集装箱.有关船载集装箱的信息.第2部分:电传数据 11页
NF H90-040-1998 货运集装箱.自动识别. 22页
NF H90-050-1999 海运集装箱.设计、结构、试验、检验和标记 35页
NF H90-202-1992 活动车箱.C级活动车箱.尺寸和一般要求 19页
NF H90-203-1991 可移动货物箱.试验 18页
NF H90-204-1995 交换体.A级交换体.尺寸和一般要求 18页
NF H90-205-1984 活动车箱。底座。规范和试验 4页
NF H90-206-1999 交换体.A级热交换体.尺寸和一般要求 13页
NF H90-207-1999 交换体.C级热交换体.尺寸和一般要求 16页
NF H90-208-1997 交换体:交换容器.尺寸、要求、试验方法和操作条件 35页
NF H90-210-2000 道路车辆上货物的固定.货物运输用商业车辆的捆绑点.最低要求和试验 13页
NF H90-211-1-2000 交换体.防水油布.第1部分:最低要求 9页
NF H90-212-2002 道路车辆货物安全.商用车辆的车体结构.最低要求 9页
NF H90-215-2000 交换体.编码.识别和标记 24页
NF H90-400-1982 Vehicle body. Van type. Fuel saving. Objectives of mass, aerodynamism, dimensions and safety. 3页
NF H92-100-1996 货架操作机.安全 40页
NF H94-001-1-2000 包装机械的安全性.第1部分:包装机和相关设备的分类和术语页
NF H94-001-2-2000 包装机械的安全性.第2部分:预成型刚性容器包装机 64页
NF H94-001-3-2000 包装机械的安全性.第3部分:成形、填充和密封机 95页
NF H94-001-4-1997 包装机械的安全 第4部分:堆列机和托盘装卸机 33页
NF H95-103-1977 传送带安全规程。滚动保护装置的示例。 14页
NF H95-104-1976 连续装卸机械。链式运输机的安全规程。接合点安全示例 15页
NF H95-105-1976 连续装卸机械。带有支承装置或传动装置的链式运输机。防止推杆或传动装置造成人身事故的示例 15页
NF H95-111-2000 连续装卸设备和系统.散装材料的气动装卸系统和元件的安全要求 32页
NF H95-112-2001 连续装卸设备和系统.筒仓、漏斗、储存斗和装料斗中存储散装物料用设备的安全性和电磁兼容性(EMC)要求 50页
NF H95-113-2002 连续装卸设备和系统.散装材料机械装卸设备(不包括固定胶带输送机)的安全和EMC要求页
NF H95-203-1986 连续装卸机械。装有随动轮的传送带输送机。计算规则 16页
NF H95-205-1978 连续装卸机械。散装产品的气动装卸。流量、挡板和功能的图形符号 4页
NF H95-320-1988 连续装卸机械.用于连续合计称重仪器组的皮带输送机 7页
NF H95-330-1987 散袋产品皮带输送机。鼓轮、轴、轴承。重型系列尺寸。 6页
NF H95-419-1983 农产食品工业用起重装卸机械。使用卷扬机或装卸机的屠宰场操作词汇 4页
NF H95-450-1980 自动笼式装卸设备。报价用标准咨询表 9页
NF H96-110-1-1997 活动垃圾桶。一般特性 19页
NF H96-110-2-1997 可移动垃圾箱 第2部分: 用于带支撑轴清空装置和/或梳状物清空装置的垃圾车的容量在500 l至1200 l 之间的有平盖的四轮垃圾箱--尺寸和设计 20页
NF H96-110-3-1997 垃圾箱 第3部分: 用于带支撑轴和/或梳状物装置的垃圾车的容量在770 l至1300 l之间的有凸盖的四轮垃圾箱--尺寸和设计 22页
NF H96-110-4-1997 可移动垃圾箱 第4部分: 用于带宽支撑轴或BG-倾卸清空装置和/或宽梳状清空装置的垃圾车、容量在750 l 至1700 l 之间的有平盖的四轮垃圾箱--尺寸和设计 21页
NF H96-110-5/A1-2000 Mobile waste containers - Part 5 : performance requirements and test methods 5页
NF H96-110-5-1997 可移动垃圾箱 第5部分: 性能要求和试验方法 25页
NF H96-110-6/A1-2000 Mobile waste containers - Part 6 : safety and health requirements页
NF H96-110-6-1997 垃圾箱 第6部分: 卫生和安全要求 13页
NF H96-112-1-1999 收集垃圾的垃圾箱的提升倾倒装置。钢箱规范 12页
NF H96-112-2-1999 收集垃圾的垃圾箱提升倾倒装置 第2部分:容量为500升至300升的便携式垃圾箱用的耳轴式提升装置 8页
NF H96-112-3-1999 收集垃圾的垃圾箱提升倾倒装置 第3部分:容量为80升至300升的便携式垃圾箱用的组合式和耳轴式提升装置 13页
NF H96-112-4-1999 垃圾收集用提升设备.第4部分:检验提升设备的要求和试验方法 10页
NF H96-113-1-2002 固定式废料容器.第1部分:耳轴、双耳轴或袖珍提升装置用带平或圆形罩的容量1700升-5000升的箱.尺寸和结构 21页
NF H96-113-2-2002 固定式废料箱.第2部分:性能要求和试验方法 20页
NF H96-113-3-2002 固定式废料箱.第3部分:安全和健康要求页
NF H96-115-2002 选择性废料收集箱.选择性废料收集用80 l到5000 l容量的地面机械提升废料箱 28页
NF H96-116-1998 移动式废料箱.测定移动式废料箱产生的空气传播噪声的测量规程 15页
NF H96-117-2001 Waste containers for selective collection - Openings of containers with two wheels or with four wheels and of stationary containers to be emptied by the top 9页
NF H96-118-2001 Selective waste collection containers - Old engine oil containers, non-movable during service - Specifications and testing 21页
NF H96-301-1-2001 Self-propelled industrial trucks - Part 1 : general safety rules页
NF H96-301-2-1989 自动装卸车辆.构造和踏板外型的规定 8页
NF H96-301-3-2001 Self-propelled industrial trucks - Part 3 : tests and measurements 84页
NF H96-302-1999 工业卡车安全性.达到和包括10000千克容量的自推动式卡车和带有一达到和包括20000N的拖斗的工业拖车.第十部分:一般要求(EN 1726-1) 99页
NF H96-303-2001 工业货车的安全.容量为10000Kg及以下的机动货车和拖杆拉力为20000N及以下的牵引车.第2部分:带有高架操作者位置的货车和特别为旅游设计的带有高架荷载的货车的附加要求 31页
NF H96-310-1975 装卸车辆。国家标准、规则和法典一览表 8页
NF H96-311-2001 工业卡车的安全.测量噪声发射的试验方法 20页
NF H96-313-2002 工业货车的安全.测量振动用试验方法 25页
NF H96-315-2000 工业卡车.电磁兼容性 15页
NF H96-320-1999 可变支承面高越野装卸车辆.构造和安全一般规定 73页
NF H96-330-1-1998 工业用载重车的安全--电气要求 第1部分:电池供电载重车的一般要求 44页
NF H96-330-2-1998 工业用载重车的安全--电气要求 第2部分:内燃机载重车的一般要求 12页
NF H96-330-3-1998 工业用载重车的安全--电气要求 第3部分:内燃机载重车输电系统的专用要求 19页
NF H96-331-1997 工业用载重车的安全--无人驾驶的载重车及其系统 20页
NF H96-332-1997 工业用载重车的安全--载重车自动功能的附加要求 14页
NF H96-333-2000 工业卡车的安全.10000KG以上的自机动车量 73页
NF H96-334-2000 工业卡车的安全.潜在爆炸环境中的操作.用于可燃气体、蒸汽、湿气和灰尘 43页
NF H96-335-1-2001 工业货车安全.脚踏货车.第1部分:堆码车 34页
NF H96-335-2-2001 工业货车安全.脚踏货车.第2部分:托盘货车 20页
NF H96-403-1996 装卸叉车.实心叉臂.榫接式.术语 8页
NF H96-404-1977 装卸叉车。榫接式实心叉臂。尺寸 3页
NF H96-406-1996 装卸叉车.榫接式叉臂和车架的安装尺寸 6页
NF H96-407-1996 装卸叉车.叉臂在操作中的检查和维修 5页
NF H96-410-2000 前移式和插腿式叉车.稳定性试验页
NF H96-411-2000 托盘堆码车和高起升平台车.稳定性试验页
NF H96-412-2000 乘驾式高起升车辆.护顶架.规范和试验方法 7页
NF H96-413-2000 机动工业车辆和牵引车.制动器性能和零件强度 9页
NF H96-601-1998 装卸滚轮和脚轮。术语 46页
NF H96-606-1975 装卸车辆。装卸车辆行驶的路面。分类 2页
NF H96-610-1998 脚轮和车轮.试验方法和装置 26页
NF H96-611-1998 小脚轮和车轮.家具用小角轮.要求.(欧洲标准EN 12528) 16页
NF H96-612-1998 脚轮和车轮.家具用脚轮.转椅用脚轮.要求. 16页
NF H96-613-1998 脚轮和车轮.手工推动公共机构用装置的脚轮和车轮 21页
NF H96-614-1998 脚轮和车轮.医院病床脚轮 17页
NF H96-615-1998 脚轮和车轮.1,1M/S(4KM/H)及以下装置的脚轮和车轮 23页
NF H96-616-1998 脚轮和车轮.大于1,1M/S(4KM/H)至4,4M/S(16KM/H)装置的脚轮和车轮 19页
NF I-ETS 300219-1995 远距通信.无线电设备和系统(RES)--陆地活动业务.传输用于产生接收方特定响应的信号的无线电设备用技术性能和试验条件 59页
NF ISO 10043-1995 银行和与银行业务有关的金融服务.信息交换.重叠顺序格式 8页
NF ISO 10045-1994 高山雪橇 安装面积 试验螺钉的要求 6页
NF ISO 10050-2006 Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD). 11页
NF ISO 10069-1-1992 压力机.弹性体压缩弹簧.第1部分:一般规格 8页
NF ISO 10069-2-1992 压力机.弹性体压缩弹簧.第2部分:附件规格 3页
NF ISO 10071-1-2001 冲压工具.球锁式冲压.第1部分:轻型球锁式冲压 16页
NF ISO 10071-2-2006 Tools for pressing - Ball-lock punches - Part 2 : ball-lock punches for heavy duty. 15页
NF ISO 10072-2004 制模用工具 浇道套 尺寸 8页
NF ISO 10073-1992 模具.支承柱 4页
NF ISO 10095-1992 咖啡.咖啡因含量测量.高性能液体色层法 7页
NF ISO 10099-2001 气压流体动力.气缸.最终检验和验收标准 8页
NF ISO 10100-2002 液压流体动力.液压缸.验收试验 7页
NF ISO 10102-2001 螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度 8页
NF ISO 10103-2001 螺钉和螺母用装配工具.双头扁形斜口套筒扳手.扳手长度和端口厚度 8页
NF ISO 10104-2001 螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度 9页
NF ISO 10110-10-2005 光学部件。光学组件的表示方法 15页
NF ISO 10110-11-1996 光学和光学仪器.光学部件和系统图纸上的说明.第11部分:无公差的数据 7页
NF ISO 10110-1-2006 光学和光学仪器.光学元件和系统用图纸制备.第1部分:总则 28页
NF ISO 10110-12-1998 光学和光学仪器.光学元件和系统图纸的制备.第12部分:非球面形表面 14页
NF ISO 10110-14-2003 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14 : Wavefront deformation tolerance. 36页
NF ISO 10110-17-2005 Optics and photonics - Preparation of drawings for optical elements and systems - Part 17 : laser irradiation damage threshold. 8页
NF ISO 10110-2-1996 光学和光学仪器.光学部件和系统图纸上的说明.第2部分:材料缺陷.应力下双折光 9页
NF ISO 10110-3-1996 光学和光学仪器.光学部件和系统图纸上的说明.第3部分:材料缺陷.气泡和夹杂物 9页
NF ISO 10110-4-1998 光学及光学仪器.光学元件和系统图纸的制备.第4部分:材料缺陷.不均匀性和擦痕 8页
NF ISO 10110-5-1996 光学和光学仪器.光学部件和系统图纸上的说明.第5部分:表面形状公差 23页
NF ISO 10110-6-1996 光学和光学仪器.光学部件和系统图纸上的说明.第6部分:定中心公关差 15页
NF ISO 10110-7-1996 光学和光学仪器.光学部件和系统图纸上的说明.第7部分:表面缺陷公差 20页
NF ISO 10110-8-1998 光学及光学仪器.光学元件和系统图纸的制备.第8部分:表面结构 14页
NF ISO 10110-9-1996 光学和光学仪器.光学部件和系统图纸上的说明.第9部分:表面处理和涂层 11页
NF ISO 10115-1999 牛藤草香精油 8页
NF ISO 10119-2003 碳纤维.密度的测定 14页
NF ISO 10122-1996 增强纱线 电缆电线的编织套、规范基础 8页
NF ISO 10126-1-1992 银行.信息译码方法.第1部分:一般原理 18页
NF ISO 10126-2-1992 银行.信息译码方法.第2部分:数据编码算法 3页
NF ISO 10134-2004 Small craft - Electrical devices - Lightning-protection systems. 13页
NF ISO 10135-1995 技术图纸--模压部件,铸件和锻件的简易表示 15页
NF ISO 1014-2004 固体矿物燃料。焦炭。真相对密度。表观相对密度和孔隙度测定。 7页
NF ISO 10145-1-1993 钎焊硬金属螺旋状刀片双刃直柄铣刀.第1部分:直柄铣刀的尺寸 2页
NF ISO 10145-2-1993 钎焊硬金属螺旋状刀片双刃直柄铣刀.第2部分:7/24锥柄铣刀的尺寸 2页
NF ISO 10160-1993 信息和文件--开放系统互联(OSI)--馆际外借应用服务定义 79页
NF ISO 10185-2004 烟草和烟草制品--词汇 49页
NF ISO 10190-1993 机动两轮车用链.性能和检验方法 7页
NF ISO 10202-2-1996 金融交易卡.采用集成电路卡的金融交易系统的安全结构.第2部分:交易程序 22页
NF ISO 10202-3-2002 金融交易卡.采用集成电路卡的金融交易系统的证券结构.第3部分:密钥的相互关系 22页
NF ISO 10202-4-1996 金融交易卡.使用集成电路卡的金融交易系统的安全结构.第4部分:安全应用模数 20页
NF ISO 10202-5-2000 金融交易卡.采用集成电路卡的金融交易系统的安全结构.第5部分:算法的使用 60页
NF ISO 10202-7-2000 财务交易卡.集成电路卡金融交易系统的证券结构.第7部分:密钥管理 35页
NF ISO 10202-8-2000 金融交易卡.采用集成电路卡的金融交易系统的安全结构.第8部分:一般原则和概述 25页
NF ISO 10209-1-1999 技术产品文献.词汇.第1部分:与技术图纸有关的术语:总则和图纸种类 11页
NF ISO 10228-1994 越野雪撬 安装面积 试验螺钉的要求 7页
NF ISO 10230-1992 自行车.花键毂和链齿轮.装配尺寸 2页
NF ISO 10243-1992 压力机.矩形截面压缩弹簧.槽的尺寸和色码 19页
NF ISO 10247/A1-2006 Conveyor belts - Characteristics of covers - Classification. 5页
NF ISO 10247-1991 运输带.覆层性能.分类 4页
NF ISO 10261-2002 Earth-moving machinery - Product identification numbering system. 12页
NF ISO 10262-2000 土方机械.液压挖掘机.司机防护装置的实验室试验和性能要求 16页
NF ISO 10263-1-1995 土方机械.操作员室内的环境.第1部分:概述和定义 5页
NF ISO 10263-2-1995 土方机械.操作员室内的环境.第2部分:空气过滤器元件的试验 9页
NF ISO 10263-3-1995 土方机械.操作员室内的环境.第3部分:操作员室密封系统的试验方法 6页
NF ISO 10263-4-1995 土方机械.操作员室内的环境.第4部分:操作员室内的通风、取暖和/或空气调节系统的试验方法 10页
NF ISO 10263-5-1995 土方机械.操作员室内的环境.第5部分:风窗除冰系统的试验方法 10页
NF ISO 10263-6-1995 土方机械.操作员室内的环境.第6部分:太阳辐射对操作员室作用的测定 5页
NF ISO 10264-1993 土方机械.钥匙锁闭起动装置 1页
NF ISO 10265-1998 土方机械.履带式机械.制动系统的性能要求和试验程序 9页
NF ISO 10266-1995 土方机械.有关配备机械的流体系统工作性能的极限坡度的测定.静态试验方法 7页
NF ISO 10270-2002 金属和合金的腐蚀.核动力反应堆用的锆合金的水腐蚀试验 15页
NF ISO 10285-1997 套筒型重复循环球式直线运动轴承 公制系列 13页
NF ISO 10303-209-2004 Industrial automation systems and integration - Product data representation and exchange - Part 209 : application protocol : composite and metallic structural analysis and related design. 990页
NF ISO 10303-212-2004 Industrial automation systems and integration - Product data representation and exchange - Part 212 : application protocol : electrotechnical design and installation. 2836页
NF ISO 10303-214-2004 Industrial automation system and integration - Product data representation and exchange - Part 214 : application protocol : Core data for automotive mechanical design processes. 3563页
NF ISO 10315-2000 香烟.烟油中尼古丁含量测定.气相色谱法 12页
NF ISO 10324-1997 情报和文献.保管说明.摘要等级 38页
NF ISO 10336-1998 原油.水的测定法.卡尔.菲舍电位滴定法 16页
NF ISO 10337-1998 原油.水的测定法.卡尔.菲舍电量滴定法 18页
NF ISO 10347-1999 蜗轮.蜗轮的几何图形.蜗轮组件的标牌、中心距及由买方提供给齿轮生产商的数据资料 8页
NF ISO 10362-1-2000 卷烟.测定香烟冷凝物的含水量.第1部分:气相色谱法 11页
NF ISO 10371-1995 增强产品.编织带.规范基础 8页
NF ISO 10372-1993 液压流体动力 四、五个孔的伺服阀--安装面 7页
NF ISO 10381-1-2003 Soil quality - Sampling - Part 1 : guidance on the design of sampling programmes. 42页
NF ISO 10381-2-2003 Soil quality - Sampling - Part 2 : Guidance on sampling techniques. 31页
NF ISO 10381-3-2002 土质.抽样.第3部分:安全性指南 28页
NF ISO 10381-4-2003 Soil quality - Sampling - Part 4 : guidance on the procedure for investigation of natural, near-natural and cultivated sites. 20页
NF ISO 10381-5-2005 Soil quality - Sampling - Part 5 : guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination. 42页
NF ISO 10381-6-1994 土壤质量--取样--实验室评价需氧微生物变化过程用泥土的收集,处理,贮存的导则 4页
NF ISO 10381-7-2006 Soil quality - Sampling - Part 7 : guidance on sampling of soil gas. 49页
NF ISO 10382-2003 Soil quality - Determination of organochlorine pesticides and polychlorinated biphenyls - Gas-chromatographic method with electron capture detection. 27页
NF ISO 10390-2005 土质 pH值的测定 11页
NF ISO 10399-2004 感官分析.方法学.二--三试验 23页
NF ISO 104-2002 轴承 止推 外形尺寸,总图 19页
NF ISO 10444-1995 信息和文献工作--国际标准技术报告号(ISRN) 9页
NF ISO 10448-1997 农用拖拉机.机具用液压装置 6页
NF ISO 10470-2005 Green coffee - Defect reference chart. 21页
NF ISO 10473-2000 大气空气.过滤媒介上颗粒物质质量的测量.β射线吸收法 16页
NF ISO 10494-1994 燃气轮机和燃气轮机组 空中发出噪声的测量 28页
NF ISO 10533/A1-2005 Earth-moving machinery - Lift-arm support devices. 5页
NF ISO 10533-1995 土方机械.吊臂承重装置 5页
NF ISO 10540-2-2004 Animal and vegetable fats and oils - Determination of phosphorus content - Part 2 : method using graphite furnace atomic absorption spectrometry. 12页
NF ISO 10540-3-2003 Animal and vegetable fats and oils - Determination of phosphorus content - Part 3 : method using inductively coupled plasma (ICP) optical emission spectrometry. 12页
NF ISO 10567-1995 土方机械.液力挖土机.挖出容量 14页
NF ISO 10570-2004 土方机械.铰接机架性能要求 7页
NF ISO 10573-1996 土壤质量.不饱和地带水含量的测定.中子深度探测器方法 18页
NF ISO 10578-1996 技术图纸.定位和位置公差.投影公差区 14页
NF ISO 10579-1994 技术图纸.标注尺寸和公差.非刚性的零件 8页
NF ISO 105-F01-1986 纺织品。印染牢度试验。标准试验织物用规范。羊毛 3页
NF ISO 105-F02-1986 纺织品。印染牢度试验。标准试验织物用规范。棉花和粘胶 2页
NF ISO 105-F03-1986 纺织品。印染牢度试验。标准试验织物用规范。聚酰胺 2页
NF ISO 105-F07-1986 纺织品。印染牢度试验。标准试验织物用规范。次级醋酸酯纤维 2页
NF ISO 105-F08-1986 纺织品。印染牢度试验。标准试验织物用规范。三醋酸酯纤维 2页
NF ISO 105-F10-1990 纺织.染色牢度试验.第F10部分:相近织物规格:多股纤维 4页
NF ISO 105-G04-1990 纺织品.印染牢度试验.第G04部分:在高湿环境中耐氮氧化物色牢度 3页
NF ISO 105-X03-1988 纺织品.色牢度试验.第X03部分:耐氯化处理色牢度 2页
NF ISO 10602-1994 摄影术 已处理过银--明胶型黑白胶片 26页
NF ISO 10620-1995 干的甘牛至菜--规格 8页
NF ISO 10621-1998 脱水新鲜胡椒--规范 8页
NF ISO 10624-1998 香精油.天然树脂香精油 8页
NF ISO 10625-1997 农作物保护设备.喷雾器嘴.识别色码 5页
NF ISO 10626-1992 作物保护设备.喷雾器.卡口式喷嘴的连接尺寸 1页
NF ISO 10627-1-1992 农用喷雾器.数据页.第1部分:示范表示 15页
NF ISO 10629-1996 毛光学玻璃.耐50℃氢氧化钠水性溶液液侵蚀性.试验方法和分类 11页
NF ISO 10633-1-1996 油料种子残渣.硫代葡萄糖苷含量的测定.第1部分:使用高效液相色谱法 13页
NF ISO 10648-1-1998 容积包装箱.第1部分:设计原则 34页
NF ISO 10656-1996 电阻焊.焊接钳用内装 11页
NF ISO 10693-1995 土质--碳酸盐含量的测定--容积法 11页
NF ISO 10694-1995 土质--干燃烧后有机碳和总碳量的测定(元素分析) 11页
NF ISO 1070-1992 明渠中液体流量的测量.水位线陡度法 13页
NF ISO 10702-1996 钢和生铁.氮含量测定.蒸馏后滴定法 13页
NF ISO 10716-1996 纸和纸板.碱残留量测定 7页
NF ISO 10726-1994 手提式链锯 链受器 尺寸和机械强度 5页
NF ISO 10727-1995 茶和固体状速溶茶--咖啡碱含量的测定 9页
NF ISO 10766-2006 液压传动。千斤顶。活塞和活塞杆矩形部份导向装置槽。尺寸。 13页
NF ISO 10767-1-1997 液压传动.系统和元件压力波动等级的测定.第1部分:泵用精确测定法 28页
NF ISO 10767-2-2000 液压流体动力.由系统和部件产生的压力波纹水平的测定.泵用简化方法 25页
NF ISO 10767-3-2001 液亚流体动力.系统和部件中产生的压力波纹水平的测定.第3部分:电动机法 31页
NF ISO 10770-1-1999 液压流体动力.电动液压控制阀.第1部分:四路定向流量控制阀的试验方法 46页
NF ISO 10770-2-1999 液压流体动力.电动液压控制阀.第2部分:三路定向流量控制阀的试验方法 40页
NF ISO 10791-1-1999 机床。加工中心。验收条件。精确度检验。 61页
NF ISO 10791-2-2001 多工位数控加工中心的试验条件.第2部分:带垂直主轴或带垂直旋转主轴通用头的机器的几何尺寸试验(垂直的Z轴) 47页
NF ISO 10791-3-1999 多工序数控加工中心的试验条件.第3部分:带整体可调节定位的或连续万能工作台的机床几何尺寸试验(垂直的Z-轴) 54页
NF ISO 10791-4-1998 多工序数控加工中心的试验条件.第4部分:线性轴和旋转轴定位的精确度和可重复性 13页
NF ISO 10791-5-1998 加工中心的试验条件 第5部分:工件夹紧爪定位的准确度和复现性 13页
NF ISO 10791-6-1998 多工序数控加工中心的试验条件.第6部分:走刀量、速度和内插补的精确度 17页
NF ISO 10791-7-1998 试验中心的试验条件 第7部分:加工的试验件精度 18页
NF ISO 10791-8-2001 多工位数控加工中心的试验条件.第8部分:在三座标平面上仿形性能的评价 11页
NF ISO 10791-9-2001 多工位数控加工中心的试验条件.第9部分:工具转换和托架转换的操作时间的评价 22页
NF ISO 1080-1997 机床--莫氏锥柄--带锥形键的销槽 7页
NF ISO 1081-1996 皮带传动装置.V形皮带、V形加筋皮带及对应的槽轮.词汇 19页
NF ISO 10814-1997 机械振动.机器对不平衡性的敏感度 15页
NF ISO 10823-2004 滚子链传动的选择方法 26页
NF ISO 10825-2006 齿轮 ISO术语系统 齿牙外观术语:磨损和损害 71页
NF ISO 1085-2001 螺钉和螺母装配工具.双头扳手.尺寸配对 6页
NF ISO 1087-1-2001 术语.词汇.第1部分:理论和应用 50页
NF ISO 1088-1986 明渠液体流量测量.流速--面积法.确定测量误差所需之数据收集和处理 21页
NF ISO 10887-1999 有键型三爪钻头卡盘.规范 14页
NF ISO 10888-1999 钻床卡盘。无键自动紧固三爪卡盘。尺寸。 15页
NF ISO 10889-1-2005 Tool holders with cylindrical shank - Part 1 : cylindrical shank, location bore - Technical delivery conditions. 12页
NF ISO 10889-2-2005 Tool holders with cylindrical shank - Part 2 : type A, shanks for tool holders of special designs. 7页
NF ISO 10889-3-2005 Tool holders with cylindrical shank - Part 3 : type B with rectangular radial seat. 14页
NF ISO 10889-4-2005 Tool holders with cylindrical shank - Part 4 : type C with rectangular axial seat. 11页
NF ISO 10889-5-1998 带圆柱柄的工具夹持器.第5部分:带有一个以上矩形底座的D型工具夹持器 7页
NF ISO 10889-6-2005 Tool holders with cylindrical shank - Part 6 : type E with cylindrical seat. 13页
NF ISO 10889-7-2005 Tool holders with cylindrical shank - Part 7 : type F with taper seat. 8页
NF ISO 10889-8-1998 带圆柱柄的工具夹持器.第8部分:Z型工具夹持器 ,附件 9页
NF ISO 10897-1997 锥度比为1:10刀杆的夹套--夹套、刀杆和螺母 16页
NF ISO 10898-1992 锪孔钻 2页
NF ISO 10899-1997 高速钢双屑槽麻花钻.技术规范 17页
NF ISO 10907-1-1997 铸型和挤压器材。金属模型构件。定中心环。 10页
NF ISO 10911-1994 带直柄的硬质金属端铣刀 尺寸 5页
NF ISO 10917-1996 同步皮带传动装置.汽车皮带和皮带轮.疲劳试验 9页
NF ISO 10945-1996 液压传动.空气液压蓄力器.气体通气口的尺寸 5页
NF ISO 10946-1999 液压动力.带分离器的装气的蓄能器.优先使用液压端口的选择 8页
NF ISO 10957-1994 信息和文献工作 国际标准音乐编号 7页
NF ISO 10958-1-1998 滑雪板.固定安装部位.第1部分:无插件滑雪板的要求和试验方法 9页
NF ISO 10958-2-2004 Snowboards - Binding mounting area - Part 2 : requirements and test methods for snowboards with inserts. 9页
NF ISO 10968-2005 土方机械.操作员驱动装置 17页
NF ISO 10980-1998 浓度测量用参考溶液浓度的鉴定 46页
NF ISO 10981-2006 Nuclear fuel technology - Determination of uranium in reprocessing-plant dissolver solution - Liquid chromatography method. 11页
NF ISO 11001-1-1997 农用轮式拖拉机和机具.三点悬挂联接装置.第1部分:U型框架联连装置 8页
NF ISO 11001-2-1997 农用轮式拖拉机和机具.三点悬挂联接装置.第2部分:A型悬挂梁架的联接装置 6页
NF ISO 11001-3-1997 农业轮式拖拉机和器械 三点联接式耦合器 第3部分: 环卡联轴节 5页
NF ISO 11001-4-1997 农业轮式拖拉机和器械 三点联接式耦合器 第4部分: 杆形联接器 6页
NF ISO 11007-1998 石油产品和润滑油 润滑脂防锈性能的测定 15页
NF ISO 11014-1-1994 化学产品用安全数据卡.第1部分:内容和各段次序 12页
NF ISO 11016-1999 中国类八角茴香油 9页
NF ISO 11019-1998 香精油.拉维纪草根油(Levisticum officinalis W.D.J.Koch) 8页
NF ISO 11020-1998 Iberian类型的松节油(Pinus pinaster Sol.)(海岸松) 10页
NF ISO 11021-1999 香精油.水含量测定.卡尔.菲舍尔法 10页
NF ISO 1102-1990 实用公路车辆.牵引车和拖车之间的机械连接.50毫米车钩装置 5页
NF ISO 11023-1999 甘草萃取物(Glycyrrhiza glabral).甘草酸含量的测定.高效液体分光光度法 11页
NF ISO 11024-1-1999 香精油.色谱轮廓制定导则 16页
NF ISO 11024-2-1999 香精油.色谱轮廓通用指南.第2部分:香精油样品色谱轮廓的使用 9页
NF ISO 11025-1998 香精油--肉桂油--用气相色谱法测定肉桂醛成分 9页
NF ISO 1103-1996 旅游拖车和轻型拖车.球形连接器 9页
NF ISO 11035-1995 感官分析--采用多维方法对建立感官剖面的解说符的识别和选择 30页
NF ISO 11036-1995 感官分析.方法学.结构断面 20页
NF ISO 11037-1999 感官分析.食品颜色评价的通用指南和试验方法 16页
NF ISO 11043-1998 甲基黑椒酚型罗勒油(Ocimum basilicum L.)(罗勒L) 9页
NF ISO 11048-1995 土壤质量.水和酸中可溶硫酸盐的含量测量 23页
NF ISO 11050-1994 软粒小麦制面粉和粗粒硬质小麦粉.动物源杂质的测定 15页
NF ISO 11051-1995 硬质小麦 规范 15页
NF ISO 11054-2006 切削工具 高速钢分类符号 7页
NF ISO 11056-2000 感官分析.方法学.量级评估法 24页
NF ISO 11074-2006 Soil quality - Vocabulary. 89页
NF ISO 11086-2004 Gas turbines - Vocabulary. 75页
NF ISO 11087-2004 高山滑雪固定件 限定器 安全规定和试验方法 14页
NF ISO 11088-2007 高山滑雪用滑雪板/固定件/靴系统组件(SFC)的安装、调节和检验 23页
NF ISO 11090-1-2000 机床.冲模放电机器的试验条件.术语和精确度试验.第1部分:单柱机器 33页
NF ISO 11090-2-2000 机床.冲模放电机器的试验条件.术语和精确度试验.第2部分:双柱机 33页
NF ISO 11095-1996 使用参考物质的线性检定 35页
NF ISO 11110-1997 冬季运动器材 滑雪/靴/固定件装置调节用试验装置 要求和试验 9页
NF ISO 11112-2005 Earth-moving machinery - Operator's seat - Dimensions and requirements. 11页
NF ISO 11131-1993 银行和相关金融业务--签约鉴定 12页
NF ISO 11158-1998 润滑油、工业用油和相关产品(L级).H族(液压系统).HH、HL、HM、HR、HV和HG类规范 16页
NF ISO 11162-2002 盐水中的胡椒粒.规范和试验方法 15页
NF ISO 11163-1996 干罗勒.规格 6页
NF ISO 11164-1996 干迷迭香.规格 6页
NF ISO 11165-1996 干药用鼠尾草.规格 6页
NF ISO 11166-1-1997 银行业务--采用不对称算法的键控管理 第1部分:原理、过程和格式 67页
NF ISO 11166-2-1997 银行业务--采用不对称算法的键控管理 第2部分:使用RSA密码系统方法认可的算法 17页
NF ISO 11168-1995 火花塞和电热塞用套筒扳手 8页
NF ISO 11170-2003 液压传动--过滤器元件--鉴定程序 10页
NF ISO 11178-1995 毒八角(星形茴香类植物)(lllicium verum Hookif).规格 10页
NF ISO 1122-1-1998 齿轮啮合词汇。几何定义。 76页
NF ISO 1122-2-1999 齿轮术语词汇.第2部分:有关蜗轮副几何学上的定义 26页
NF ISO 11222-2002 Air quality - Determination of the uncertainty of the time average of air quality measurements. 26页
NF ISO 11235-2004 橡胶工业用原料.亚磺酰胺型加速剂.试验方法 30页
NF ISO 11236-2006 橡胶工业原料.对苯二胺型防护剂.试验方法 26页
NF ISO 1124-1991 橡胶混合物成分.碳黑装运 取样程序 2页
NF ISO 11259-1998 土壤质量 土壤简述 45页
NF ISO 11260-1994 土质 用氯化钡溶液测定有效阳极交换能力和基极饱和水平 13页
NF ISO 11261-1995 土质--总氮含量的测定--改进的克耶达(Kjeldahl)测定法 8页
NF ISO 1126-2006 橡胶配合剂.炭黑.热损失的测定 10页
NF ISO 11262-2004 Soil quality - Determination of cyanide. 26页
NF ISO 11263-1995 土壤质量.磷含量测定.碳酸氢钠溶液中可溶磷的光谱测定 9页
NF ISO 11265-1995 土质 电导率的测定 7页
NF ISO 11269-2-2006 Soil quality - Determination of the effects of pollutants on soil flora - Part 2 : effects of chemicals on the emergence and growth of higher plants. 18页
NF ISO 11271-2003 Soil quality - Determination of redox potential - Field method. 19页
NF ISO 11272-1998 土壤质量.干松密度的测定 15页
NF ISO 11274-1998 土壤质量.水保持特性的测定.实验室法 27页
NF ISO 11275-2004 Soil quality - Determination of unsaturated hydraulic conductivity and water retention characteristic - Wind's evaporation method. 17页
NF ISO 11276-1995 土壤质量.孔隙中水压的测定.表面张力计 24页
NF ISO 11289-1993 密封容器中热处理食品--pH值的测定 4页
NF ISO 11292-1995 速溶咖啡.游离和总碳水化合物含量的测定.高性能负离子交换色谱法测量方法 18页
NF ISO 11294-1994 焙炒的磨碎咖啡 水含量的测定 103℃时质量损失测定法(常规法) 6页
NF ISO 113-1999 轴承 支座 外形尺寸 9页
NF ISO 1132-1-2000 滚动轴承.公差.第1部分:术语和定义 72页
NF ISO 1132-2-2002 滚动轴承.公差.第2部分:测量和校准原理和方法 52页
NF ISO 11338-1-2005 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1 : sampling. 34页
NF ISO 11338-2-2004 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2 : sample preparation, clean-up and determination. 33页
NF ISO 11345-2006 Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods. 32页
NF ISO 11346-2006 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use. 17页
NF ISO 11374-1997 农业拖拉机和器械 四点刚性车钩 规格 8页
NF ISO 11415-1998 冲压工具.成套压模 16页
NF ISO 11416-1995 网球拍.网球拍构件和物理参数 11页
NF ISO 11421-1999 光学和光学仪器.光学传输功能(OTF)的测量精度 37页
NF ISO 11423-1-1997 水质.苯和某些衍生物的测定.第1部分:液面上部气相色谱法 22页
NF ISO 11452-3-2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3 : transverse electromagnetic (TEM) cell. 23页
NF ISO 11452-5-2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5 : stripline. 20页
NF ISO 11452-7-2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7 : direct Radio Frequency (RF) power injection. 18页
NF ISO 11455-1995 粗制光学玻璃.双折射的测定 10页
NF ISO 11461-2002 土质.使用取芯套管作为容积一部分测定土壤水含量.重量分析法 10页
NF ISO 11463-2002 金属与合金的腐蚀.斑蚀的评估 14页
NF ISO 11464-2006 土质 生化分析用抽样的预处理 15页
NF ISO 11465-1994 土质 在质量基础干燥物质和水含量的测定 7页
NF ISO 11466-1995 土壤质量.溶于王水中的痕量元素的萃取 10页
NF ISO 11471-1997 农用拖拉机和农用机械.遥控液压传动装置和控制装置编码 5页
NF ISO 11475-1999 纸和纸板.CIE白度测定,D65/10级(室外日光) 15页
NF ISO 1148-1988 聚合物和共聚物的水扩散。pH值的测定 1页
NF ISO 11497-1998 屈膝旋转法滑雪板和皮靴固定装置.固定安装部位.要求和试验方法 12页
NF ISO 11508-1998 土壤质量 颗粒密度的测定 10页
NF ISO 11519-1-1995 公路车辆.低速数据组通信.第1部分:概述和定义 9页
NF ISO 11521-1996 证券.互存储证券类型图 36页
NF ISO 11529-1-2005 铣刀--名称 第1部分:双刀片、单柄或刀片式铣刀 12页
NF ISO 11529-2-2005 铣刀 名称 第2部分:端铣刀和带可拆卸垫片的齿刀 14页
NF ISO 11555-1-2004 Road vehicles - Stabilizing devices for caravans and light trailers - Part 1 : integrated stabilizers. 13页
NF ISO 11563-2004 Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for archieving the fullness of pipelines. 10页
NF ISO 11564-2000 固定源排放.氮氧化物质量浓度的测定.萘乙二胺分光光度法 20页
NF ISO 11565-1999 道路车辆.火花塞.试验方法和要求 12页
NF ISO 11566-1997 碳纤维 单丝试样拉伸性能的测定 10页
NF ISO 11567-1997 碳纤维--长丝直径和横截面积的测定 10页
NF ISO 11568-4-1999 银行业务.密钥管理(零售).第4部分:使用公开密钥的密钥管理技术 32页
NF ISO 11568-5-1999 银行业务.键控管理(零售).第5部分:公共密钥密码系统键盘寿命 25页
NF ISO 11568-6-1999 银行业务.键控管理(零售).第6部分:密钥管理方案 17页
NF ISO 11597-1998 用密度测量法检验硝酸铀酰或硝酸钚溶液试样 14页
NF ISO 11598-1998 以测定铀浓度为目的的获得硝酸铀酰溶液有代表性取样的要求 6页
NF ISO 11620-1998 情报和文献工作.文献库性能指示器 66页
NF ISO 11632-1998 固定源辐射.二氧化硫质量浓缩的测定.离子色谱法 24页
NF ISO 11648-1-2003 Statistical aspects of sampling from bulk materials - Part 1 : general principles. 100页
NF ISO 11648-2-2001 从散装物料中抽样的统计方法.第2部分:颗粒状物料的抽样 115页
NF ISO 1170-1993 煤和焦炭.不同基的分析计算 4页
NF ISO 11727-2002 气压流体动力.控制阀和其它部件的孔口和控制机构的标识 19页
NF ISO 1173-2001 螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验 12页
NF ISO 1174-1-1997 螺钉和螺母用装配工具--传动方接头--第1部分:手套筒扳手的传动方接头 9页
NF ISO 1174-2-1997 螺钉和螺母用装配工具--传动方接头--第2部分:机用套筒扳手用的传动方接头 9页
NF ISO 1176-1991 公路车辆.重量.词汇和代码 7页
NF ISO 11782-1-2002 金属与合金的腐蚀.腐蚀疲劳试验.第1部分:失效试验周期 17页
NF ISO 11782-2-2002 金属与合金的腐蚀.腐蚀疲劳试验.第2部分:使用预裂纹样品的裂纹扩展试验 35页
NF ISO 11783-2-2002 农业和林业用拖拉机和机械.系列控制和通信数据网.第2部分:物理层 59页
NF ISO 11783-3-2001 农业和林业用拖拉机和机械.系列控制和通信数据网.第3部分:数据链路层 38页
NF ISO 11783-4-2001 农业和林业用拖拉机和机械.系列控制和通信数据网.第4部分:网络层 21页
NF ISO 11783-5-2001 农业和林业用拖拉机和机械.系列控制和通信数据网.第5部分:网络管理 29页
NF ISO 11783-6-2004 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 6 : virtual terminal. 170页
NF ISO 11783-7-2002 农业和林业用拖拉机和机械.系列控制和通信数据网.第7部分:基本信息应用层 113页
NF ISO 11783-8-2006 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8 : power train messages. 7页
NF ISO 11783-9-2002 农业和林业用拖拉机和机械.系列控制和通信数据网.第9部分:ECU 拖拉机 17页
NF ISO 11784/A1-2006 Radio-frequency identification of animals - Code structure. 6页
NF ISO 11784-1997 动物的射频识别--代码结构 5页
NF ISO 11785-1997 动物的射频识别--技术原理 19页
NF ISO 11799-2004 Information and documentation - Document storage requirements for archive and library materials. 21页
NF ISO 11813-1999 奶和奶制品.锌含量的测定.火焰原子吸收光谱法 9页
NF ISO 11817-1994 焙炒的磨碎咖啡 水含量的测定 卡尔.费歇尔法(参考法) 8页
NF ISO 11843-1-1998 检测能力.第1部分:术语和定义 18页
NF ISO 11843-2-2000 检测的能力.第2部分:线性校正中的方法学 29页
NF ISO 11843-3-2003 Capability of detection - Part 3 : methodology for determination of the critical value for the response variable when no calibration data are used. 15页
NF ISO 11843-4-2004 Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value. 12页
NF ISO 11844-1-2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1 : determination and estimation of indoor corrosivity. 22页
NF ISO 11844-2-2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2 : determination of corrosion attack in indoor atmospheres. 19页
NF ISO 11844-3-2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3 : measurement of environmental parameters affecting indoor corrosivity. 16页
NF ISO 11845-2002 金属与合金的腐蚀.腐蚀试验的一般原则 12页
NF ISO 11846-2002 金属与合金的腐蚀.溶解热处理铝合金的耐晶间腐蚀性的测定 8页
NF ISO 1185-2004 道路车辆.装有24V电路的牵引车和挂车间的电气连接.24N型7个触点的连接器(普通型) 12页
NF ISO 11862-2005 Earth-moving machinery - Auxiliary starting aid electrical connector. 10页
NF ISO 11866-1-2006 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 1 : most probable number technique using 4-methylumbelliferyl-Beta-D-glucuronide (MUG). 15页
NF ISO 11866-2-2006 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2 : colony-count technique at 44 oC using membranes. 13页
NF ISO 11868-1998 热处理牛奶.乳果糖含量的测定.高性能液相色谱法 13页
NF ISO 11881-2002 铝合金。薄铝制品腐蚀试验。 24页
NF ISO 11886-2006 Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specifications. 36页
NF ISO 11900-2-2001 冲压工具.球形闸门凸模固定板.第2部分:小功率用C和D型 9页
NF ISO 11900-3-2004 Tools for pressing - Ball-lock punch retainers - Part 3 : type E, reduced for heavy duty. 7页
NF ISO 11901-1-2004 压力机.气体弹簧.可互换性,安装尺寸,符号,标志和交货技术条件 17页
NF ISO 11901-2-2004 压床设备.气簧.第2部分:附件规范 18页
NF ISO 11929-5-2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 5 : fundamentals and applications to counting measurements on filters during accumulation of radioactive materiel. 40页
NF ISO 11929-6-2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 6 : fundamentals and applications to measurements by use of transient mode. 24页
NF ISO 11929-7-2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 7 : fundamentals and general applications. 29页
NF ISO 11929-8-2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 8 : fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment. 29页
NF ISO 11933-1-1997 反应堆外壳的部件 第1部分:手套/袋门,手套/袋门盖,外壳环和可换部件 63页
NF ISO 11933-2-1997 反应堆外壳的部件 第2部分:手套、焊接袋、遥控夹具和操作用防护罩 64页
NF ISO 11933-3-2000 密封罩用组件.第3部分:光面门用传送系统、气闸室、双开门用传送系统和废鼓形容器的密封连接 51页
NF ISO 11933-4-2001 密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置 89页
NF ISO 11933-5-2002 压力壳部件.第5部分:电路和流体回路的渗透性 63页
NF ISO 11934-1998 X射线和伽玛射线辐射.直接或非直接读数电容器芯子剂量仪 20页
NF ISO 11943-2000 液压传动.液体的联机自动颗粒计数系统.校准和检测方法 36页
NF ISO 11992-1-2004 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1 : physical layer and data-link layer. 27页
NF ISO 11992-2-2004 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2 : application layer for brakes and running gear. 47页
NF ISO 11992-3-2004 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3 : application layer for equipment other than brakes and running gear. 45页
NF ISO 1204-1999 往复式内燃机.旋转方向标称.汽缸和汽缸盖内阀门的标称. 右左线马达和马达位置的定义 14页
NF ISO 12043-1997 滚动轴承.单列圆筒形滚子轴承.平挡圈和非凸缘边的倒圆角尺寸 6页
NF ISO 12044-1997 轴承 单列斜接触滚珠轴承 边缘未加载的轴衬倒角尺寸 6页
NF ISO 12046-1996 皮革同步传动.汽车制造用皮带轮和皮带.物理性能的测定 10页
NF ISO 1206-2002 滚动轴承.48、49和69尺寸系列的滚针轴承.边界尺寸和公差 13页
NF ISO 12082-1997 干酪和加工干酪制品.添加的柠檬酸盐乳化剂和表示为柠檬酸的酸化剂/pH值控制剂的含量计算 5页
NF ISO 12083-1995 信息和文献工作--电子工件加工图的制备和标高 224页
NF ISO 12097-1-2003 Road vehicles - Airbag components - Part 1 : vocabulary. 27页
NF ISO 12097-2-1997 道路车辆.气囊元件.第2部分:气囊模块的试验 26页
NF ISO 12097-3-2003 Road vehicles - Airbag components - Part 3 : testing of inflator assemblies. 32页
NF ISO 12098-2004 带有24V系统的商业车辆.拖曳车辆和挂车间的15极连接器.尺寸和触点分配 16页
NF ISO 12123/A1-2006 Raw optical glass in bulk and preshaped forms - Bubbles and other inclusions - Test method and classification. 5页
NF ISO 12123-1998 散装和预成形的光学粗玻璃--气泡和其它杂质--试验方法和分类 10页
NF ISO 12140-1999 农业机械.农用拖车和拖挂设备.主牵引梁千斤顶 7页
NF ISO 12151-2-2007 Connections for hydraulic fluid power and general use - Hose fittings - Part 2 : hose fittings with ISO 8434-1 and ISO 8434-4 24 o cone connector ends with O-rings. 20页
NF ISO 1216-2002 软木板。商业用烘干的。定义。分类和包装。 6页
NF ISO 12164-1-2002 带法兰接触面的空心锥体界面.第1部分:刀柄.尺寸 16页
NF ISO 12164-2-2002 带法兰接触面的空心锥体界面.第2部分:接收器.尺寸 10页
NF ISO 12165-2000 模具.压缩模、注塑模和压铸模零件.术语和符号 42页
NF ISO 1217-1998 容积式压缩机 验收试验 63页
NF ISO 1219-1-2007 液体动力系统和元件.图形符号与回路图.第1部分:图形符号 172页
NF ISO 1219-2-1998 液压和气压传动 图形符号和电路图 第2部分:电路图 29页
NF ISO 12194-1996 烟叶.烟叶梗粒子尺寸的测定 17页
NF ISO 12195-1996 经过捶击的烟草.剩余粗叶脉中含量的测定 22页
NF ISO 12-1988 管道鉴定方法 5页
NF ISO 12238-2006 Pneumatic fluid power - Directional control valves - Measurement of shifting time. 18页
NF ISO 12240-1-1998 关节轴承.第1部分:径向关节轴承 17页
NF ISO 12240-2-1998 关节轴承.第2部分:角接触径向关节轴承 8页
NF ISO 12240-3-1998 球面滑动轴承.第3部分:止推球面滑动轴承 8页
NF ISO 12240-4-1998 关节轴承.第4部分:关节轴承杆端 14页
NF ISO 123-2004 Rubber latex - Sampling. 12页
NF ISO 12353-1-2003 Road vehicles -Traffic accident analysis - Part 1 : vocabulary. 45页
NF ISO 12353-2-2004 Road vehicles - Traffic accident analysis - Part 2 : guidelines for the use of impact severity measures. 28页
NF ISO 12368-2002 农用车辆.牵引车上钩式机械连接器.试验方法和要求 11页
NF ISO 124/A1-2006 Latex, rubber - Determination of total solids content - Amendement 1 : precision data. 6页
NF ISO 1241-1997 香精油--乙酰化前后脂值的测定以及游离醇含量和醇总量的测定 8页
NF ISO 124-2004 胶乳.总固体含量的测定 8页
NF ISO 1242-1999 香精油.酸值的测定 8页
NF ISO 12480-1-2000 起重机.安全使用.第1部分:总则 45页
NF ISO 12499-1999 工业通风机。机械保护设备。 21页
NF ISO 12508-2005 Earth-moving machinery - Operator station and maintenance areas - Bluntness of edges. 4页
NF ISO 12509-2005 挖土机械 照明灯、信号灯、边灯和外廓灯以及反折射反光镜 71页
NF ISO 125-2004 浓缩天然胶乳浓度 碱度测定 8页
NF ISO 12615-2005 Bibliographic references and source identifiers for terminology work. 33页
NF ISO 12616-2003 Translation-oriented terminography. 34页
NF ISO 126-2005 浓缩天然胶乳硫化胶乳 干胶含量的测定 8页
NF ISO 12678-1-1997 耐火材料制品.耐火砖的尺寸测量和外部缺陷.第1部分:尺寸和与图纸的一致性 9页
NF ISO 12678-2-1997 耐火产品--耐火砖尺寸和外部缺陷的测量 第2部分:角和边缘缺陷以及其它表面不完美性 11页
NF ISO 1268-10-2006 Fibre-reinforceds plastics - Methods of producing test plates - Part 10 : injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens. 23页
NF ISO 1268-11-2006 Fibre-reinforced plastics - Methods of producing test plates - Part 11 : injection moulding of BMC and other long-fibre moulding compounds - Small plates. 18页
NF ISO 1268-1-2002 纤维增强式塑料制品.试验板的生产方法.第1部分:一般条件 8页
NF ISO 1268-2-2002 纤维增强式塑料制品.试验板的生产方法.第2部分:接触式和喷射模制法 11页
NF ISO 1268-3-2002 纤维增强式塑料制品.试验板的生产方法.第3部分:湿性压缩模制法 10页
NF ISO 1268-4-2006 Fibre-reinforced plastics - Methods of producing test plates - Part 4 : moulding of prepregs. 18页
NF ISO 1268-5-2002 纤维增强式塑料制品.试验板的生产方法.第5部分:长纤维的缠绕法 14页
NF ISO 1268-6-2003 Fibre-reinforced plastics - Methods of producing test plates - Part 6 : pultrusion moulding. 7页
NF ISO 1268-7-2002 纤维增强式塑料制品.试验板的生产方法.第7部分:树脂传递模制法 9页
NF ISO 1268-8-2004 Fibre-reinforced plastics - Methods of producing test plates - part 8 : compression moulding of SMC and BMC. 14页
NF ISO 1268-9-2003 Fibre-reinforced plastics - Methods of producing test plates - Part 9 : moulding of GMT/STC. 8页
NF ISO 127/A1-2006 Rubber, natural latex concentrate - Determination of KOH number - Amendment 1 : precision data. 6页
NF ISO 127-2004 天然胶乳.KOH值测定 10页
NF ISO 1272-2000 香精油.苯酚含量的测定 8页
NF ISO 1275-2006 传动和输送设备用双节距精密滚柱链和链轮齿 28页
NF ISO 12756-1998 绘图与书写仪器.圆珠笔和签字笔.词汇 9页
NF ISO 12757-1-1998 园珠笔及其笔芯.第1部分:一般用途 13页
NF ISO 12757-2-1998 圆珠笔和笔芯.第2部分:文件用途 9页
NF ISO 12789-2002 参考中子辐射.模拟工作场所中子场生产的特性及方法 32页
NF ISO 12790-1-2002 辐射防护.放射生物测定的性能标准.第1部分:一般原则 39页
NF ISO 1279-1997 香精油--羧基值的测定--氯化羟铵电势测定法 8页
NF ISO 12794-2000 核能.辐射防护.手足和眼睛用热致发光剂量计 27页
NF ISO 12795-2006 Nuclear fuel technology - Uranium dioxide powder and pellets - Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction. 11页
NF ISO 128-1-2003 Technical drawings - General principles of presentation - Part 1 : introduction and index. 16页
NF ISO 128-22-1999 技术图纸.表示的一般规则.第22部分:标题栏和文字说明栏的惯例和应用 12页
NF ISO 128-24-1999 技术图纸.表示的一般规则.第24部分:机械工程图纸上的线条 17页
NF ISO 128-25-2002 Technical drawings - General principles of presentation - Part 25 : lines on shipbuilding drawings. 14页
NF ISO 128-30-2001 技术图纸.表示方法的一般原则.第30部分:视图的基本惯例 15页
NF ISO 128-40-2001 技术图纸.表示方法的一般原则.第40部分:断面和截面的基本惯例 10页
NF ISO 12844-2000 未加工的光学玻璃.金刚石薄片的可磨性.试验方法和分类 11页
NF ISO 128-44-2001 技术图纸.表示方法的一般原则.第44部分:机械工程图纸上的截面部位 11页
NF ISO 128-50-2001 技术图纸.表示方法的一般原则.第50部分:断面和截面部分上表示区域的基本惯例 9页
NF ISO 129-1-2005 Technical drawings - Indication of dimensions and tolerances - Part 1: general principles. 37页
NF ISO 12917-1-2002 石油和液体石油产品.卧式圆柱形油罐的校准.第1部分:手工法 26页
NF ISO 12917-2-2003 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2 : internal electro-optical distance-ranging method. 19页
NF ISO 12925-1-1999 润滑剂、工业润滑油和有关产品(L类).C组(齿轮).第1部分:密式齿轮系统用润滑剂规范 13页
NF ISO 13012-1998 循环滚珠式、套筒式线性运动滚动轴承--附件 24页
NF ISO 13041-1-2004 Test conditions for numerically controlled turning machines and turning centres - Part 1 : geometric tests for machines with a horizontal workholding spindle. 40页
NF ISO 13041-4-2004 Test conditions for numerically controlled turning machines and turning centres - Part 4 : accuracy and repeatability of positioning of linear and rotary axes. 10页
NF ISO 13041-5-2007 Test conditions for numerically controlled turning machines and turning centres - Part 5 : accuracy of feeds, speeds and interpolations. 14页
NF ISO 13041-6-2005 Test conditions for numerically controlled turning machines and turning centres - Part 6 : accuracy of a finished test piece. 18页
NF ISO 13041-7-2004 Test conditions for numerically controlled turning machines and turning centres - Part 7 : evaluation of contouring performances in the coordinate planes. 9页
NF ISO 13041-8-2004 Test conditions for numerically controlled turning machines and turning centres - Part 8 : evaluation of thermal distortions. 11页
NF ISO 1304-2006 橡胶配合剂.炭黑.吸碘值测定.滴定法 17页
NF ISO 1306-2005 橡胶配合剂 炭黑(丸状) 表观密度的测定 6页
NF ISO 13091-1-2003 Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1 : method of measurement at the fingertips. 27页
NF ISO 13091-2-2004 Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 2 : analysis and interpretation of measurements at the fingertips. 31页
NF ISO 13200-2000 起重机.安全标志和危险图示.总则 43页
NF ISO 13203-2006 链传动. 链, 配件和齿轮. 总成图. 术语和词汇 33页
NF ISO 13215-1-2007 Road vehicles - Reduction of misuse risk of child restraint systems - Part 1 : forms for field studies. 18页
NF ISO 13216-1-2000 道路车辆.车辆中锚固装置和儿童约束系统用锚固装置的附件.第1部分:座椅绳环的锚固装置和附件 24页
NF ISO 13216-2-2006 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 2 : top tether anchorages and attachments. 28页
NF ISO 13216-3-2007 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 3 : classification of child restraint dimensions and space in vehicle. 25页
NF ISO 13218-1999 道路车辆.儿童约束系统.有关儿童乘客事故的报告格式 10页
NF ISO 13226-2006 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. 39页
NF ISO 13276-1997 烟草和烟草产品 尼古丁纯度的测定 钨硅酸重力法 9页
NF ISO 1328-1-1995 圆柱齿轮--ISO精度系列.第1部分:齿面偏差定义和允许值 33页
NF ISO 1328-2-1997 圆柱齿轮--ISO 精度系列 第2部分:径向合成偏差和径向跳动数据的定义和允许值 17页
NF ISO 13299-2003 Sensory analysis - Methodology - General guidance for establishing a sensory profile. 32页
NF ISO 13300-1-2006 Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 1 : staff responsibilities. 14页
NF ISO 13300-2-2006 Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 2 : recruitment and training of panel leaders. 16页
NF ISO 13301-2002 Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure. 34页
NF ISO 13302-2004 感官分析.外来化合物通过包装物传给食品的评定方法 34页
NF ISO 13317-1-2001 用重力液体沉淀法测定粒度分布.第1部分:通用原则和导则 19页
NF ISO 13317-2-2001 用重力液体沉淀法测定粒度分布.第2部分:固定移液管法 16页
NF ISO 13317-3-2001 用重力液体沉淀法测定粒度分布.第3部分:X射线重力技术 15页
NF ISO 13318-1-2001 用离心液体沉淀法测定粒度分布.第1部分:通用原则和导则 23页
NF ISO 13319-2000 颗粒尺寸分布的测定.电传感区方法 34页
NF ISO 13320-1-2000 颗粒尺寸分析.激光衍射方法.第1部分:一般规则 42页
NF ISO 13321-1996 粒度分析.相关光量子光谱学 25页
NF ISO 13332-2001 往复式内燃机.在发动机底座处测量由高速和中速往复式内燃机产生的结构噪声的试验规程 20页
NF ISO 13333-1995 土方机械.操作员室处于倾斜位置时的支承装置 5页
NF ISO 13347-1-2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1 : general overview. 42页
NF ISO 13347-2-2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2 : reverberant room method.页
NF ISO 13347-3-2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3 : enveloping surface methods. 27页
NF ISO 13347-4-2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 4 : sound intensity method. 34页
NF ISO 13348-2006 Industrial fans - Tolerances, methods of conversion and technical data presentation. 61页
NF ISO 13349-1999 工业风机.词汇及类别的定义 43页
NF ISO 13350-1999 工业电扇.射流风扇的性能试验 32页
NF ISO 13356-1997 外科植入物--Yttria稳定的四角形锆基陶瓷材料 11页
NF ISO 13357-1-2005 Petroleum products - Determination of the filtrability of lubricating oils - Part 1 : procedures for oils in presence of water. 14页
NF ISO 13357-2-1999 石油产品.润滑油可滤性测定.第2部分:干油程序 14页
NF ISO 13372-2005 Condition monitoring and diagnostics of machines - Vocabulary. 16页
NF ISO 13373-1-2003 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1 : general procedures. 63页
NF ISO 13373-2-2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data. 41页
NF ISO 13374-1-2003 Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1 : general guidelines. 22页
NF ISO 13379-2004 Condition monitoring and diagnostics of machines - General guidelines on data interpretation and diagnostics techniques. 32页
NF ISO 13381-1-2005 Condition monitoring and diagnostics of machines - Pronostics - Part 1 : general guidelines. 27页
NF ISO 13399-1-2006 Cutting tool data representation and exchange - Part 1: overview, fundamental principles and general information model. 456页
NF ISO 1342-2001 迷迭香油(迷迭香 L.) 12页
NF ISO 13440-1997 作物保护机械 农业喷雾器 总残存容量的测定 7页
NF ISO 13441-1-1998 空气助压农用喷雾器--数据表 第1部分:典型设计 18页
NF ISO 13441-2-1998 空气助压农用喷雾器--数据表 第2部分:元件规范 38页
NF ISO 13463-2000 核能.轻水反应堆MOX燃料生产用核级二氧化钚粉末.产品规范定义协助导则 10页
NF ISO 13465-1999 核能.核燃料循环技术.分子吸收分光光度法测定硝酸溶液中的镎 10页
NF ISO 13491-1-1999 银行业务.安全加密设备(零售).概念、要求和评价方法 35页
NF ISO 13492-1998 银行业务.关于的数据元素(零售)的密钥管理 15页
NF ISO 13528-2005 Statistical methods for use in proficiency testing by interlaboratory comparisons. 74页
NF ISO 13539-1998 土方机械.挖沟机.定义和商业规范 20页
NF ISO 13556-2000 道路车辆.废气系统泄漏定位和设备规范 12页
NF ISO 13584-1-2004 Industrial automation systems and integration - Parts library - Part 1 : overview and fundamental principles. 27页
NF ISO 13584-26-2004 Industrial automation systems and integration - Parts library - Part 26 : logical resource : information supplier identification. 29页
NF ISO 13584-31-2004 Industrial automation systems and integration - Parts library - Part 31 : implementation resources : geometric programming interface. 370页
NF ISO 13584-42-2004 Industrial automation systems and integration - Parts library - Part 42 : description methodology : methodology for structuring part families. 174页
NF ISO 13592-1998 游艇 汽油发动机抗回火装置 10页
NF ISO 13653-1999 光学和光学仪器.一般光学试验方法.成像场中有关辐照度的测量 18页
NF ISO 13674-1-2004 Road vehicles - Test method for the quantification of on-centre handling - Part 1 : weave test. 18页
NF ISO 13681-1996 肉和肉制品.酵母菌和霉菌的计数.菌落计数技术 11页
NF ISO 13685-1997 姜和姜含油树脂--主要的辣混合物(姜辣素和姜烯酚)的测定 16页
NF ISO 13690-1999 谷类作物、豆科作物和磨制产品.静态批量取样 25页
NF ISO 13715-2000 技术图纸.未确定形状的边缘.词汇和制图说明 18页
NF ISO 13737-2004 石油产品。低温下润滑脂锥的渗透性 10页
NF ISO 13738-2000 润滑油、工业润滑油和相关产品(L级).:E系列(内燃机润滑油).两冲程汽油发动机用油规范(EGB、EGC、EGD类) 9页
NF ISO 13740-1999 原油及石油产品.运输的可衡算性.远洋油轮装载和卸载时容器经验参数的评定 14页
NF ISO 13752-1998 空气质量.用二次法作参照在野外条件下进行测量其方法的不确定性的评定 21页
NF ISO 13766-1999 土方机械.电磁兼容性 42页
NF ISO 13772-2005 Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance. 13页
NF ISO 13877-1999 土壤质量.多核芳香碳氢化合物的测定.高性能液相色谱法 22页
NF ISO 13878-1998 土壤质量.干燃法测定氮总含量(元素分析) 8页
NF ISO 13909-1-2005 Hard coal and coke - Mechanical sampling - Part 1 : general introduction. 13页
NF ISO 13909-2-2005 Hard coal and coke - Mechanical sampling - Part 2 : coal - Sampling from moving streams. 39页
NF ISO 13909-3-2005 Hard coal and coke - Mechanical sampling - Part 3 : coal - Sampling from stationary lots. 25页
NF ISO 13909-4-2005 Hard coal and coke - Mechanical sampling - Part 4 : coal - Preparation of test samples. 38页
NF ISO 13909-5-2005 Hard coal and coke - Mechanical sampling - Part 5 : Coke - Sampling from moving streams. 36页
NF ISO 13909-6-2005 Hard coal and coke - Mechanical sampling - Part 6 : Coke - Preparation of test samples. 31页
NF ISO 13909-7-2005 Hard coal and coke - Mechanical sampling - Part 7 : methods for determining the precision of sampling, sample preparation and testing. 51页
NF ISO 13909-8-2005 Hard coal and coke - Mechanical sampling - Part 8 : methods of testing for bias. 40页
NF ISO 13942-2001 粘结磨料产品.极限偏差和径向跳动公差 23页
NF ISO 13964-1999 空气质量.环境空气中臭氧含量的测定.紫外线光度计法 18页
NF ISO 13992-2006 高山转动式滑雪板皮靴固定装置.安全要求和试验方法 41页
NF ISO 13993-2001 滑雪设备租赁商店操作规程.租赁设备中完善的和不完善的高山滑雪板皮靴固定装置系统的取样和检验 17页
NF ISO 14004-2004 Environmental management systems - General guidelines on principles, systems and support techniques. 54页
NF ISO 14015-2002 环境管理.场地和组织机构的环境评定 26页
NF ISO 14025-2006 Environmental labels and declarations - Type III environmental declarations - principles and procedures. 34页
NF ISO 14050-2002 环境管理.词汇 40页
NF ISO 14063-2006 Environmental management - Environemental communications - Guidelines and examples. 35页
NF ISO 14064-1-2006 Greenhouse gases - Part 1 : specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals. 29页
NF ISO 14064-2-2006 Greenhouse gases - Part 2 : specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements. 39页
NF ISO 14064-3-2006 Greenhouse gases - Part 3 : specification with guidance for the validation and verification of greenhouse gas assertions. 43页
NF ISO 1413-2000 钟表业.防震手表 6页
NF ISO 14137-2000 机床.金属丝放电加工机床的试验条件.术语和准确度试验 26页
NF ISO 14145-1-1998 签字笔及其笔芯.第1部分:一般用途 12页
NF ISO 14145-2-1998 圆珠笔及笔芯.第2部分:文件用笔 8页
NF ISO 14146-2000 辐射防护.X和γ射线辐射的个人剂量处理器的定期评价准则和性能限值 10页
NF ISO 14152-2002 中子辐射防护屏蔽.设计原则和选择适用材料考虑因素 87页
NF ISO 14154-2005 Soil quality - Determination of some selected chlorophenols - Gas-chromatographic method with electron-capture detection. 18页
NF ISO 14223-1-2003 Radiofrequency identification of animals - Advanced transponders - Part 1 : air interface. 24页
NF ISO 14227-2002 小艇.磁罗盘 12页
NF ISO 14229-2002 道路车辆.诊断系统.诊断设备规范 59页
NF ISO 14230-1-2002 道路车辆.诊断系统.关键词协议 2000.第1部分:物理层 14页
NF ISO 14230-2-2002 道路车辆.诊断系统.关键词协议 2000.第2部分:数据链路层 34页

标准获取办法:

在线提交 点击提交信息  (推荐)
电话联系 010-8334-5348  刘老师
电子邮件 wwtrans@126.com

 

分享到:
或许你还对下面的文章感兴趣
最新文章
最热关注
本月排行
Copyright 2000-2020 标准信息网. Some Rights Reserved | DESIGN BY [A]