海量最新、最全国外技术标准原文、中文版速递——>点击
首页 > 法国标准 > 正文

NF 标准数据库参考目录 23

发布-leeglee | 查看- | 发表时间-2010/6/29
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)

 

 NF EN 741-2000 连续装卸设备和系统.散装材料的气动装卸系统和元件的安全要求 32页
NF EN 74-1-2006 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1 : couplers for tubes - Requirements and test procedures. 37页
NF EN 744-1995 塑料管道系统--热塑管--抗外部冲击的试验方法--昼夜连续法 14页
NF EN 745-1999 农业机械.旋转式割草机和甩刀式割草机.安全性 50页
NF EN 746-1-1997 工业热处理设备--第1部分:工业热处理设备的共同安全要求 50页
NF EN 746-2-1997 工业热处理设备--第2部分:燃烧和燃料处理系统的安全要求 61页
NF EN 746-3-1997 工业热处理设备--第3部分:保护气体的产生和使用的安全要求 44页
NF EN 746-4-2000 工业热处理工艺设备.第4部分:热浸电解热处理设备的特殊安全性要求 18页
NF EN 746-5-2000 工业热处理工艺设备.第5部分:盐浴热处理设备的特殊安全性要求 23页
NF EN 746-8-2000 工业热处理工艺设备.第8部分:淬火设备的特殊安全性要求 30页
NF EN 747-1-1993 家具.家用双层床.第1部分:安全要求 7页
NF EN 747-2-1993 家具.家用双层床.第2部分:试验方法 12页
NF EN 748-2004 游戏场设施 足球球门 运行和安全要求及试验方法 19页
NF EN 749-2004 游乐场设施 手球球门 使用和安全要求,试验方法 15页
NF EN 750-2004 游乐场所设施.曲棍球球门.使用和安全要求以及试验方法 13页
NF EN 751-1-1997 接触第1、2、3族气体及热水的金属螺纹连接用密封材料.第1部分:厌氧密封材料 13页
NF EN 751-2-1997 接触第1、2、3族气体及热水的金属螺纹连接用密封材料.第2部分:非时效硬化的密封材料 15页
NF EN 751-3-1997 接触第1、2、3类气体及热水的金属螺纹连接用密封材料.第3部分:非烧结的PTFE带材 14页
NF EN 752-1-1996 建筑物室外排出和排水网.第1部分:概述和定义 12页
NF EN 752-2-1996 室外排水排污网.第2部分:性能规定 20页
NF EN 752-3-1996 室外排水排污网.第3部分:草案制定 24页
NF EN 752-4-1997 建筑物外部的排污系统 第4部分:水力设计和考虑 36页
NF EN 752-5-1997 建筑物外部的排污系统 第5部分:修理 31页
NF EN 752-6-1998 建筑物外部排水和污水系统.第6部分:泵设备 29页
NF EN 752-7-1998 建筑物外管道和污水系统.第6部分:维修和操作(欧洲标准EN 752-7) 33页
NF EN 753-1-1997 识别卡系统.挠性薄卡片.第1部分:通用技术规范 37页
NF EN 753-2-1997 识别卡系统.挠性薄卡片.第2部分:磁录音技术 27页
NF EN 753-3-1999 识别卡系统.横断挠性薄卡片.第3部分:试验方法 42页
NF EN 754-1-1997 铝和铝合金.冷拔线材/棒材和管材.第1部分:检验和交货的技术条件(欧洲标准EN 754-1) 18页
NF EN 754-2-1997 铝和铝合金--冷拔棒材和管材 第2部分:机械特性 42页
NF EN 754-3-1995 铝和铝合金.控制棒材和管.第3部分:圆棒、尺寸和形状公差 8页
NF EN 754-4-1995 铝和铝合金.控制棒材和管.第4部分:方棒、尺寸和形状公差 10页
NF EN 754-5-1995 铝和铝合金.控制棒材和管.第5部分:矩形棒、尺寸和形状公差 10页
NF EN 754-6-1995 铝和铝合金.控制棒材和管.第6部分:六角形棒,尺寸和形状公差 9页
NF EN 754-7-1998 铝和铝合金.冷拉线材/棒材和管材.第7部分:无缝管.尺寸和形状公差 13页
NF EN 754-8-1998 铝及铝合金.冷拔棒材/条材和管材.第8部分:多孔拉拔管尺寸和形状公差 14页
NF EN 755-1-1997 铝和铝合金--挤压棒材、管材和型材 第1部分:检验和交货技术条件 19页
NF EN 755-2-1997 铝和铝合金--挤压棒材、管材和型材 第2部分:机械特性 58页
NF EN 755-3-1995 铝和铝合金.挤压棒材、管材和型材、第3部分:圆棒材,有关尺寸和形状的公差 8页
NF EN 755-4-1995 铝和铝合金.挤压棒材、管材和型材.第4部分:方棒材,有关尺寸和形状的公差 10页
NF EN 755-5-1995 铝和铝合金.挤压棒材、管材和型材.第5部分:长方形棒材,有关尺寸和形状的公差 11页
NF EN 755-6-1995 铝和铝合金.挤压棒材、管材和型材.第6部分:六角形棒材,有关尺寸和形状的公差 9页
NF EN 755-7-1999 铝和铝合金.挤制线材/棒材、管材和型材.第7部分:无缝管,尺寸和形状公差 15页
NF EN 755-8-1998 铝和铝合金.挤压棍/棒材,管和靠模.第8部分:钻头出水口管,尺寸和框架公差 14页
NF EN 755-9-2001 铝和铝合金.挤制丝材/棒材、管及型材.第9部分:型材的尺寸和形状公差 18页
NF EN 756-2004 焊接用消耗品.非合金与细晶钢焊药弧焊用焊条和焊药丝.分类 14页
NF EN 757-1997 电焊消耗品--高强度钢手工金属弧焊用涂药焊条--分类 13页
NF EN 758-1997 电焊消耗品--非合金钢和细晶粒钢的有气体保护和无气体保护金属弧焊用药芯焊条--分类 16页
NF EN 760-1996 焊接用可耗产品.埋弧焊用焊药.分类 15页
NF EN 761-1994 塑料管道系统 玻璃增强热固塑料(GRP)管道 在干燥条件下塑料变形因子的测定 12页
NF EN 764-1-2004 Pressure equipment - Part 1 : terminology - Pressure, temperature, volume, nominal size. 15页
NF EN 764-2-2002 压力设备.第2部分:数量、符号和单位 8页
NF EN 764-3-2002 压力设备.第3部分:定义和有关方面 7页
NF EN 764-4-2003 Pressure equipment - Part 4 : establishment of technical delivery conditions for metallic materials. 49页
NF EN 764-5-2003 Pressure equipment - Part 5 : compliance and inspection documentation of materials. 15页
NF EN 764-7-2002 压力设备.第7部分:不用火加热的压力设备的安全系统 41页
NF EN 765-1994 援助食品运输用袋.除单独使用的聚丙烯外的纺织聚烯烃制袋 11页
NF EN 766-1994 援助食品运输用袋.麻布制袋 10页
NF EN 767-1994 援助食品运输用袋.纺织麻/聚烯烃布制袋 11页
NF EN 768-1994 援助食品运输用袋.双层棉布制袋 10页
NF EN 769-1994 援助食品运输用袋.纺织棉花/聚烯烃布制袋 11页
NF EN 770-1994 援助食品运输用袋.纸制袋 9页
NF EN 771-1/A1-2005 Specification for masonry units - Part 1 : clay masonry units. 14页
NF EN 771-1-2004 Specification for masonry units - Part 1 : clay masonry units. 46页
NF EN 771-2/A1-2005 Specification for masonry units - Part 2 : calcium silicate masonry units. 10页
NF EN 771-2-2004 Specification for masonry units - Part 2 : calcium silicate masonry units. 33页
NF EN 771-3/A1-2005 Specification for masonry units - Part 3 : aggregate concrete masonry units (Dense and light-weight aggregates). 11页
NF EN 771-3-2004 Specification for masonry units - Part 3 : aggregate concrete masonry units (Dense and light-weight aggregates). 35页
NF EN 771-4/A1-2005 Specification for masonry units - Part 4 : autoclaved aerated concrete masonry units. 9页
NF EN 771-4-2004 Specification for masonry units - Part 4 : autoclaved aerated concrete masonry units. 28页
NF EN 771-5/A1-2005 Specification for masonry units - Part 5 : manufactured stone masonry units. 9页
NF EN 771-5-2004 Specification for masonry units - Part 5 : manufactured stone masonry units. 28页
NF EN 771-6-2006 Specification for masonry units - Part 6 : natural stone masonry units. 30页
NF EN 772-10-1999 圬工单位的试验方法.第10部分:硅酸钙和高压蒸养加气混凝土结构含水量的测定 7页
NF EN 772-11/A1-2004 Methods of test for masonry units - Part 11 : determination of water absorption of aggregate concrete, autoclaved aerated concrete manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay 7页
NF EN 772-11-2001 圬工单元试验方法.第11部分:集料混凝土,加工石材和天然石材圬工单元毛细吸水的测定及石膏圬工单元水初始吸收速率的测定 8页
NF EN 772-1-2001 圬工单元试验方法.第1部分:压缩强度测定 14页
NF EN 772-13-2001 圬工单元试验方法.第13部分:圬工单位净和毛干密度测定(天然石材除外) 10页
NF EN 772-14-2002 Methods of test for masonry units - Part 14 : determination of moisture movement of aggregate concrete and manufactured stone masonry units. 10页
NF EN 772-15-2001 圬工单元试验方法.第15部分:蒸压充气混凝土圬工单位水蒸汽渗透性的测定 9页
NF EN 772-16/A1-2005 Methods of test for masonry units - Part 16 : determination of dimensions. 6页
NF EN 772-16/A2-2005 Methods of test for masonry units - Part 16 : determination of dimensions. 10页
NF EN 772-16-2001 圬工单元试验方法.第16部分:尺寸测定 10页
NF EN 772-18-2001 圬工单元试验方法.第18部分:硅酸盐圬工单元耐冻溶性测定 8页
NF EN 772-19-2001 圬工单元试验方法.第19部分:大型水平打孔的粘土圬工单元潮气扩散的测定 10页
NF EN 772-2/A1-2005 Methods of test for masonry units - Part 2 : determination of percentage area of voids in masonry units (by paper indentation). 6页
NF EN 772-20/A1-2005 Methods of test for masonry units - Part 20 : determination of flatness of faces of masonry units. 7页
NF EN 772-20-2001 圬工单元试验方法.第20部分:集料混凝土,加工石材和天然石材圬工单元表面平坦度测定 7页
NF EN 772-2-1999 圬工设施试验方法.第2部分:集成混凝土圬工设施空隙面积百分比测定(纸刻痕法) 8页
NF EN 772-3-1999 圬工设施试验方法.第3部分:静流称重法测定粘土圬工设施中的空隙百分率和净容积 7页
NF EN 772-4-1999 圬工设施试验方法.第4部分:天然石圬工设施总的和开式多孔性的测定及实际密度和松密度测定 10页
NF EN 772-5-2002 圬工单元试验方法.第5部分:粘土圬工单元中活性可溶盐含量的测定 12页
NF EN 772-6-2002 Methods of test for masonry units - Part 6 : determination of bending tensile strength of aggregate concrete masonry units. 7页
NF EN 772-7-1999 圬工设施试验方法.第7部分:水沸腾法测定粘土圬工防潮设施的吸水率 7页
NF EN 772-9/A1-2005 Methods of test for masonry units - Part 9 : determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling. 6页
NF EN 772-9-1999 圬工设施试验方法.第9部分:沙充填法测定硅酸钙圬工设施的体积、空隙百分率和净容积 8页
NF EN 773-1999 液压放泄管道、排雨水和废水系统组件一般要求.(欧洲标志EN773) 19页
NF EN 774/A1-1997 园艺机具 内装发动机手持式树篱修剪机 安全性 5页
NF EN 774/A2-1997 NF EN 774-1996的修改件2 6页
NF EN 774/A3-2001 园艺机具.手提式电动绿篱修剪机.安全性 19页
NF EN 774-1996 园林设备.内装马达式便携树篱修剪机.安全 27页
NF EN 777-1/A1-2002 非家用多燃烧器的燃气式顶置散热管加热器系统.第1部分:D系统的安全性 13页
NF EN 777-1/A2-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第1部分:D系统的安全性 19页
NF EN 777-1/A3-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第1部分:D系统的安全性 5页
NF EN 777-1-2000 非家用多燃烧器的燃气式架空辐射管式加热器系统.第1部分:系统D.安全 76页
NF EN 777-2/A1-2002 非家用多燃烧器的燃气式顶置散热管加热器系统.第2部分:E系统的安全性 13页
NF EN 777-2/A2-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第2部分:E系统的安全性 19页
NF EN 777-2/A3-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第2部分:E系统的安全性 5页
NF EN 777-2-2000 非家用多燃烧器的燃气式架空辐射管式加热器系统.第2部分:系统E.安全 77页
NF EN 777-3/A1-2002 非家用多燃烧器的燃气式顶置散热管加热器系统.第3部分:F系统的安全性 13页
NF EN 777-3/A2-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第3部分:F系统的安全性 19页
NF EN 777-3/A3-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第3部分:F系统的安全性 5页
NF EN 777-3-2000 非家用多燃烧器的燃气式架空辐射管式加热器系统.第3部分:系统F.安全 78页
NF EN 777-4/A1-2002 非家用多燃烧器的燃气式顶置散热管加热器系统.第4部分:H系统的安全性 13页
NF EN 777-4/A2-2002 非家用多燃烧器的燃气式顶置散热管加热器系统.第4部分:H系统的安全性 19页
NF EN 777-4/A3-2002 非家用多燃烧器的燃气的顶置散热管式加热器系统.第4部分:H系统的安全性 5页
NF EN 777-4-1999 非家用多燃炉燃气架空辐射管状加热系统.第4部分:H系统.安全性(EN773-4) 80页
NF EN 778/A1-2002 净输入热量不超过70KW不借助风扇输送燃烧空气和/或燃烧产品的空间供暖的家用燃气强制对流空气加热器 7页
NF EN 778-1998 发生器。热空气脉冲调制器。气体燃料的大气燃烧嘴,热功率低于或等于70千瓦。 103页
NF EN 779-2003 一般通用微粒空气过滤器--要求,试验和标记 71页
NF EN 786/A1-2001 园艺机具.电动手扶和手持割草机和草坪边缘修剪机.机械安全性 21页
NF EN 786-1996 花园机具.电动步行手扶剪草机和草地修边机.机械安全 23页
NF EN 787-1994 援助食品运输用袋.聚乙烯薄膜制袋 10页
NF EN 788-1994 援助食品运输用袋.复合材料薄膜制管形袋 11页
NF EN 789-2005 木结构.试验方法.主要成分为木材的壁板机械性能的测定 34页
NF EN 790-2003 国内航运船舶.倾斜角在45°至60°的楼梯.要求、型号 11页
NF EN 791-1996 钻机.安全性 75页
NF EN 792-10-2000 手持非电动工具.安全性要求.第10部分:压紧动力工具 20页
NF EN 792-11-2000 手持非电动工具.安全性要求.第11部分:下料机和剪切机 19页
NF EN 792-1-2000 手持非电动工具.安全性要求.第1部分:无螺纹机械紧固件的组装动力工具 19页
NF EN 792-12-2000 手持非电动工具.安全要求.第12部分:小型往复式圆摆锯 21页
NF EN 792-13-2000 手持非电动工具.安全要求.第13部分:紧固件驱动工具 40页
NF EN 792-2-2000 手持非电动工具.安全性要求.第2部分:切割和折边工具 22页
NF EN 792-3-2000 手持非电动工具.安全性要求.第3部分:钻孔机和攻丝机 20页
NF EN 792-4-2000 手持非电动工具.安全性要求.第4部分:非旋转敲击动力工具 24页
NF EN 792-5-2000 手持非电动工具.安全性要求.第5部分:旋转敲击动力钻 23页
NF EN 792-6-2000 手持非电动工具.安全性要求.第6部分:螺纹紧固件组装动力工具 26页
NF EN 792-7-2002 手持非电动工具.安全要求.第7部分:磨床 47页
NF EN 792-8-2001 手持非电动工具.安全要求.第8部分:砂轮磨光机和抛光机 22页
NF EN 792-9-2001 手持式非电动工具.安全要求.第9部分:模具磨机 21页
NF EN 794-1/A1-2001 肺部呼吸器.第1部分:临界护理呼吸器用特殊要求 5页
NF EN 794-1-1997 肺通气器 第1部分: 急诊治疗用通风器的详细规定 48页
NF EN 794-3/A1-2005 Lung ventilators - Part 3 : particular requirements for emergency and transport ventilators. 7页
NF EN 794-3-1998 肺呼吸器.第3部分:急救和输送呼吸器的特殊要求 46页
NF EN 795/A1-2000 高处坠落防护.锚固装置.要求和试验 9页
NF EN 795-1996 高处跌落防护装置.锚固装置.要求和试验 24页
NF EN 797-1995 条形码.术语规范.EAN/UPC 31页
NF EN 798-1995 条形码.术语规范.巴码 17页
NF EN 799-1995 条形码.符号规范"128码" 24页
NF EN 80-2001 壁挂式便器.连接尺寸 7页
NF EN 802-1994 塑料管道系统 压力管道系统用注模热塑塑料配件 最大变形的挤压试验方法 7页
NF EN 803-1994 塑料管道系统 压力管道用弹性闭封环式接头的注模热塑塑料配件 耐无轴向推力的短期内压的试验方法 6页
NF EN 80416-1-2001 设备用图形符号的基本原则.第1部分:符号源的创建 18页
NF EN 80416-3-2003 设备上使用图形符号的基本原则.第3部分:图形符号使用指南 14页
NF EN 804-1994 塑料管道系统 压力管道用液状粘固剂连接的注模套筒配件 耐短期内静水压的试验方法 6页
NF EN 805-2000 供水.建筑物外部供水系统和部件要求 62页
NF EN 806-1/A1-2002 Specifications for installations inside buildings conveying water for human consumption - Part 1 : general. 7页
NF EN 806-1-2001 建筑物内部人用水供应设备规范.第1部分:总则 40页
NF EN 806-2-2005 Specification for installations inside buildings conveying water for human consumption - Part 2 : design. 57页
NF EN 806-3-2006 Specifications for installations inside buildings conveying water for human consumption - Part 3 : pipe sizing - Simplified mehod. 17页
NF EN 809-1998 液压泵和液压泵装置.通用安全性要求 25页
NF EN 810-1997 用电动马达驱动的压缩机式去湿机 性能试验、标志、运行要求和技术数据表 20页
NF EN 81-1/A1-2006 Safety rules for the construction and installation of lifts - Part 1 : electric lifts. 24页
NF EN 81-1/A2-2005 Safety rules for the construction and installation of lifts - Part 1 : electric lifts - A2 : machinery and pulley spaces. 30页
NF EN 81-1-1986 Lifts and service lifts. Safety rules for the construction and installation. Part 1 : electric lift. 99页
NF EN 811-1996 机器安全性.防止下肢到达危险区域的安全距离 11页
NF EN 81-1-1998 Safety rules for the construction and installation of lifts - Part 1 : electric lifts. 170页
NF EN 812/A1-2002 工业用防撞帽 5页
NF EN 81-2/A1-2006 Safety rules for the construction and installation of lifts - Part 2 : hydraulic lifts. 23页
NF EN 81-2/A2-2005 Safety rules for the construction and installation of lifts - Part 2 : hydraulic lifts - A2 : Machinery and pulley spaces. 31页
NF EN 81-2-1988 Safety rules for the construction and installation of lifts and service lifts. Part 2 : hydraulic lifts. 132页
NF EN 812-1997 工业用防撞帽 20页
NF EN 81-2-1998 Safety rules for the construction and installation of lifts - Part 2 : hydraulic lifts. 173页
NF EN 81-28-2003 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28 : remote alarm on passenger and goods passenger lifts. 19页
NF EN 813-1997 防止高空坠落的人员保护装置 裆带式腰带 14页
NF EN 81-3-2001 电梯建造和安装的安全规则.第3部分:电动和液压电梯 86页
NF EN 815/A1-2005 Safety of unshielded tunnel boring machines and rodless boring machines for rock. 7页
NF EN 815-1996 无牵引杆升降机井道用无护板隧洞和钻机 38页
NF EN 81-58-2004 Safety rules for the construction and installation of lifts - Examination and tests - Part 58 : landing doors fire resistance test. 31页
NF EN 816-1996 卫生间管龙头装置.自动关闭阀 PN 10 37页
NF EN 81-70/A1-2005 Safety rules for the construction and installations of lifts - Particular applications for passenger and good passengers lifts - Part 70 : accessibility to lifts for persons including persons with disability. 6页
NF EN 81-70-2003 Safety rules for the construction and installation of lifts - Particular applications for passenger and good passenger lifts - Part 70 : accessibility to lifts for persons including persons with disability. 33页
NF EN 81-71-2005 Safety rules for the construction and installation of lifts - Particular applications to passenger and goods passenger lifts - Part 71 : vandal resistant lifts. 29页
NF EN 81714-2-1999 产品技术文件用图形符号的设计.第2部分:计算机敏感方式的图形符号,包括参考库的图形符号规范及其交换要求 95页
NF EN 81714-3-2001 产品技术文件用图形符号的设计.第3部分:连接节点、网络及其编码的分类 13页
NF EN 817-1997 卫生器具.机械式搅拌器(PN 10).通用技术规范 45页
NF EN 81-72-2004 Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72 : firefighters lifts. 35页
NF EN 81-73-2005 Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73 : behaviour of lifts in the event of fire. 19页
NF EN 81-80-2004 Safety rules for the construction and installation of lifts - Existing lifts - Part 80 : rules for the improvement of safety of existing passenger and goods passenger lifts. 41页
NF EN 818-1-1996 升降铰链.安全.短环链式.第1部分:一般验收条件 16页
NF EN 818-2-1996 升降铰链.安全.铰链吊具用平均公差铰链.等级8 17页
NF EN 818-3-1999 升降用短节链.安全.第3部分:吊链的中等公差链.4号 17页
NF EN 818-4-1996 升降铰链.安全.第4部分:铰链吊具.等级8 24页
NF EN 818-5-1999 升降用短节链.安全.第5部分:吊链.4号 23页
NF EN 818-6-2000 升降用短节链.安全.第6部分:链式吊索.由生产商提供的使用和维修的信息规范 21页
NF EN 818-7-2002 提升用短节链条.安全性.第7部分:(T型、DAT型和DT型) T 级升降机用小公差链条 34页
NF EN 820-1-2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1 : determination of flexural strength at elevated temperatures. 12页
NF EN 820-2-2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2 : determination of self-loaded deformation. 12页
NF EN 820-3-2005 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3 : determination of resistance to thermal shock by water quenching. 14页
NF EN 82045-1-2002 文件管理.第1部分:原则和方法 37页
NF EN 82045-2-2005 Document management - Part 2 : metadata elements and information reference model. 108页
NF EN 821-1-1995 先进技术陶瓷.坚如磐石的陶瓷.热物理性能--第1部分:热膨胀性的测定 22页
NF EN 821-2-1997 先进技术陶瓷--单片陶瓷--热物理特性 第2部分:用激光闪光(或热脉冲)法测定热扩散系数 24页
NF EN 821-3-2005 先进技术陶瓷 单片陶瓷 热物理性能 第3部分:特殊比热的测定 19页
NF EN 822-1994 用于建筑设备的绝热产品.长度和宽度的测定 9页
NF EN 823-1994 建筑设备用隔热制品 厚度的测定 15页
NF EN 824-1994 建筑设备用隔热制品 垂直度的测定 11页
NF EN 825-1994 建筑设备用绝热产品.平面度测定 11页
NF EN 826-1996 适用于建筑物设备的热绝缘产品.压缩性的测定 17页
NF EN 827-2006 胶粘剂 常规固体含量和恒定质量固体含量的测定 9页
NF EN 828-1998 粘合剂.亲水性.通过固体表面首要表面张力和接触角度测定(欧洲标准EN 828) 13页
NF EN 832-1999 建筑物热性能.热能计算.住宅 60页
NF EN 834-1995 记录受热体表面消耗值用供暖费分配器.带供电的设备 26页
NF EN 835-1995 房间散热器的消耗测定用配给器--在蒸发原理基础上的无供电设备 25页
NF EN 836/A1-1997 修改件1 6页
NF EN 836/A2-2001 园艺机具.电动剪草机.安全性 21页
NF EN 836/A3-2004 Garden equipment - Powered lawnmowers - Safety. 20页
NF EN 836-1997 园艺机具.动力剪草机.安全性 68页
NF EN 837-1-1997 压力计--第1部分:布尔登管压力计--尺寸、计量、要求和试验 34页
NF EN 837-2-1997 压力计--第2部分:压力计的选择和安装建议 13页
NF EN 837-3-1997 压力计--第3部分:膜片和膜盒压力计--尺寸、计量、要求和试验 30页
NF EN 838-1996 工作场所大气.气体和水蒸气扩散取样器.要求和试验方法 40页
NF EN 840-1-2004 活动垃圾桶。一般特性 20页
NF EN 840-2-2004 可移动垃圾箱 第2部分: 用于带支撑轴清空装置和/或梳状物清空装置的垃圾车的容量在500 l至1200 l 之间的有平盖的四轮垃圾箱--尺寸和设计 19页
NF EN 840-3-2004 垃圾箱 第3部分: 用于带支撑轴和/或梳状物装置的垃圾车的容量在770 l至1300 l之间的有凸盖的四轮垃圾箱--尺寸和设计 23页
NF EN 840-4-2004 可移动垃圾箱 第4部分: 用于带宽支撑轴或BG-倾卸清空装置和/或宽梳状清空装置的垃圾车、容量在750 l 至1700 l 之间的有平盖的四轮垃圾箱--尺寸和设计 22页
NF EN 840-5-2004 可移动垃圾箱 第5部分: 性能要求和试验方法 28页
NF EN 840-6-2004 垃圾箱 第6部分: 卫生和安全要求 14页
NF EN 841-1995 条形码.选择和使用指南 8页
NF EN 84-1997 木材防腐剂--生物试验前经处理的木材的加速老化--浸漂工艺 7页
NF EN 842-1996 机械的安全性.可视的危险警报信号.一般要求、设计和试验 13页
NF EN 843-1-1995 先进技术陶瓷.坚如磐石的陶瓷--环境温度下的机械性能.第1部分:抗弯强度的测定 19页
NF EN 843-3-2005 先进技术陶瓷.坚如磐石的陶瓷.环境温度下的机械性能.第3部分:根据恒定应力速度下抗弯曲性能试验测定裂缝次临界扩展参数 15页
NF EN 843-4-2005 先进工艺陶瓷 单片陶瓷 室温时的机械性能 第4部分:维氏、努氏和洛氏表面硬度试验 23页
NF EN 844-10-1998 锯开的圆木.术语.第10部分:品种和真菌侵害术语 12页
NF EN 844-11-1998 圆木和锯木.术语.第11部分:有关昆虫引起的降解的术语 8页
NF EN 844-1-1995 圆木和锯木.术语.第1部分:圆木和锯木共有的一般术语 7页
NF EN 844-12-2001 圆木和锯木.术语.第12部分:附加术语及通用目录 56页
NF EN 844-2-1997 圆木和锯材.术语.第2部分:圆木通用术语 8页
NF EN 844-3-1995 圆木和锯木.术语.第3部分:有关锯木的一般术语 16页
NF EN 844-4-1997 圆木和锯材.术语.第4部分:含水量术语 10页
NF EN 844-5-1997 圆木和锯木--术语--第5部分:有关圆木尺寸的术语 6页
NF EN 844-6-1997 圆木和锯木--术语--第6部分:有关锯木尺寸的术语 7页
NF EN 844-7-1997 圆木和锯木--术语-第7部分:有关木材组织结构的术语 9页
NF EN 844-8-1997 圆木和锯木--术语--第8部分:有关圆木特性的术语 14页
NF EN 844-9-1997 圆木和锯木--术语--第9部分:有关锯木特性的术语 14页
NF EN 845-1-2003 Specification for ancillary components for masonry - Part 1 : ties, tension straps, hangers and brackets. 49页
NF EN 845-2-2003 Specification for ancillary components for masonry - Part 2 : lintels. 37页
NF EN 845-3-2003 Specification for ancullary components for masonry - Part 3 : bed joint reinforcement of steel meshwork. 25页
NF EN 846-10-2000 圬工辅助成份试验方法.第10部分:支架负载偏转特性和负载能力测定 10页
NF EN 846-11-2000 圬工辅助部件试验方法.第11部分:尺寸测定和梁的弯曲 9页
NF EN 846-13-2002 圬工辅助构件试验方法.第13部分:有机涂层耐冲击性、耐磨性及耐腐蚀性的测定 13页
NF EN 846-2-2000 圬工辅助成份试验方法.第2部分:灰浆粘结处预制床接头增强的粘结强度测定 12页
NF EN 846-3-2000 圬工辅助成份试验方法.第3部分:预制床连接处增强的焊接剪切负载能力测定 10页
NF EN 846-4/A1-2005 Methods of test for ancillary components for masonry - Part 4 : determination of load capacity and load-deflection characteristics of straps. 6页
NF EN 846-4-2002 圬工辅助部件试验方法.第4部分:托架载荷能力和加载变形特性测定 15页
NF EN 846-5-2000 圬工辅助成份试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性测定 13页
NF EN 846-6-2000 圬工辅助成份试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性测定(双端法) 13页
NF EN 846-7-2000 圬工辅助成份试验方法.第7部分:拉伸和压缩负载容量和墙系柱和负载代替特性测定(单端法) 12页
NF EN 846-8/A1-2006 Methods of test for ancillary components for masonry - Part 8 : determination of load capacity and load-deflection characteristics of joist hangers. 5页
NF EN 846-8-2000 圬工辅助成份试验方法.第8部分:墙筋吊架处负载偏转特性和负载能力测定 11页
NF EN 846-9-2000 圬工辅助成份试验方法.第9部分:梁的耐挠曲和耐剪切性测定 11页
NF EN 847-1-2005 Tools for woodworking - Safety requirements - Part 1 : milling tools, circular saw blades. 33页
NF EN 847-2-2001 木工工具.安全要求.第2部分:装刀柄铣刀的刀柄的要求 11页
NF EN 847-3-2004 Tools for woodworking - Safety requirements- Part 3 : clamping devices. 16页
NF EN 848-1/A1-2001 木材加工机械的安全性.带旋转工具的单面注模机.第1部分:单轴垂直注模机 7页
NF EN 848-1-1998 木材加工机械的安全性.带旋转工具的单面铸模机.第1部分:单轴垂直铸模机 (欧洲标准 EN 848-1) 49页
NF EN 848-2-1998 木工机械的安全性.带旋转工具的单面铸模机.第2部分:单轴人工加料/组合加料的手动靠模铣床 37页
NF EN 848-3-1999 木工机械的安全.带旋转刀具的单边铸模机械.第3部分:数控(NC)镗床和手动靠模铣床 48页
NF EN 851-1995 铝和铝合金.烹调器具生产用圆坯料.规范 12页
NF EN 853-1997 橡胶软管.带饰带金属丝螺旋加强物的液压型.规范 14页
NF EN 854-1996 带纺织物骨架的水力学型橡胶管和软管.规范 15页
NF EN 855-1997 塑料软管和软管组件.热塑织物增强型液压管.规范 11页
NF EN 856-1997 橡胶软管.带金属丝螺旋加强物的液压型.规范 12页
NF EN 857-1997 橡胶软管.带金属丝加强物的紧密液压型.规范 12页
NF EN 858-1/A1-2005 Separator systems for light liquids (e.g. oil and petrol) - Part 1 : principles of product design, performance and testing, marking and quality control. 22页
NF EN 858-1-2002 轻液体(例如:油和石油)分离器系统.第1部分:产品设计原则、性能和测试、标记和质量控制 49页
NF EN 858-2-2003 Separator systems for light liquids (for example oil and petrol) - Part 2 : selection of nominal size, installation, operation and maintenance. 23页
NF EN 859-1997 木工机械安全--人工加料平面刨床 51页
NF EN 860-1997 木工机械安全--单面去厚度刨床 32页
NF EN 861-1997 木工机械安全--平面刨床和去厚度刨床 55页
NF EN 862-2006 包装.防儿童的包装.非药物产品用不能再次封闭的包装件的要求和检验程序 18页
NF EN 863-1996 防护服.机械性能.试验方法:耐穿透 10页
NF EN 866-4-2000 测试消毒器和消毒过程用生物系统.第4部分:辐射消毒器用特殊系统 11页
NF EN 867-3-1997 消毒器用非生物系统--第3部分:用于Bowie和Dick试验的B级指示剂 25页
NF EN 867-4-2001 消毒器用非生物系统.第4部分:蒸汽渗透检测用鲍威(Bowie)和迪克(Dick)试验选择指示器规范 40页
NF EN 867-5-2001 消毒器用非生物系统.第5部分:B型和S型小型消毒器的指示器系统和加工激发装置规范 29页
NF EN 868-10-2000 要消毒的医疗器材用包装材料和系统.第10部分:热封口小袋、纸卷和盖用粘合剂涂层非机织聚烯烃材料.要求和试验方法 13页
NF EN 868-1-1997 医用器具消毒用包装材料和装置--第1部分:一般要求和试验方法 26页
NF EN 868-2-1999 已消毒医疗设备用包装材料和系统.第2部分:消毒包.要求和试验方法 21页
NF EN 868-3-1999 消毒医疗设备用包装材料和系统.第3部分:小袋和卷轴生产及纸袋生产用纸.要求和试验方法 16页
NF EN 868-4-1999 消毒医疗设备用包装材料和系统.第4部分:要求和试验方法 16页
NF EN 868-5-1999 要消毒的医疗器材用包装材料和系统.第5部分:热封口和自封口小袋、纸卷和塑料薄膜结构.要求和试验方法 17页
NF EN 868-6-1999 消毒医疗设备用包装材料和系统.第6部分:生产医用环氧乙烷或辐照消毒纸袋用纸.要求和试验方法. 16页
NF EN 868-7-1999 消毒医疗设备包装材料和系统.第7部分:生产医用环氧乙烷或辐照消毒热封闭袋用粘贴涂覆纸.要求和试验方法. 20页
NF EN 868-8-1999 要消毒的医疗器材用包装材料和系统.第8部分:与 EN 285 相一致的蒸气消毒器用可再使用的消毒容器.要求和试验方法 19页
NF EN 868-9-2000 要消毒的医疗器材用包装材料和系统.第9部分:热封口小袋、纸卷和盖用未涂层非机织聚烯烃材料.要求和试验方法 10页
NF EN 869-2006 高压金属铸造设备的安全规定 42页
NF EN 872-2005 水的试验。悬浮物的测定。 14页
NF EN 875-1995 金属材料焊缝的破坏试验.冲撞弯曲试验.试验位置、凹口定位和检验 10页
NF EN 876-1995 金属材料焊缝的破坏性试验.熔焊连接熔化金属的纵向拉力试验 10页
NF EN 877/A1-2006 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance. 26页
NF EN 877-1999 建筑物排水用铸铁管、管件及其接头和附件.要求、试验方法和质量保证 41页
NF EN 878-2004 人饮用水处理用化学产品--硫化铝 22页
NF EN 88/A1-1996 上游压力低于或等于200mbar的使用气体燃料仪器用压力调节器 10页
NF EN 881-2005 Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric). 22页
NF EN 88-1991 上游压力低于或等于200毫巴,使用气体燃料设备的压力调节器 37页
NF EN 882-2005 人饮用水处理用化学产品--铝酸钠 21页
NF EN 883-2005 人饮用水处理用化学产品--聚氯化铝氢氧化物和聚氯化铝氢氧物硫酸盐 21页
NF EN 885-2005 Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate. 20页
NF EN 88528-11-2005 Reciprocating internal combustion engine driven alternating current generating sets - Part 11 : rotary uninterruptible power systems - Performance requirements and test methods. 52页
NF EN 886-2005 Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate. 20页
NF EN 887-2005 Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate. 21页
NF EN 888-2005 Chemicals used for treatment of water intended for human consumption - Iron (III) chloride. 37页
NF EN 889-2005 Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate. 33页
NF EN 89/A2-2000 家用供热水的燃气蓄水热水器 7页
NF EN 89/A3-2006 Gas-fired storage water heaters for the production of domestic hot water. 26页
NF EN 89/A4-2007 Gas-fired storage water heaters for the production of domestic hot water. 9页
NF EN 890-2005 Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate liquid. 39页
NF EN 891-2005 Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate. 36页
NF EN 89-2000 家用的供热水的燃气储水式加热器 108页
NF EN 892-2005 登山运动和攀登运动器材.绳索.安全要求和试验方法 25页
NF EN 893-1999 登山设备.钉鞋.安全要求和试验方法 16页
NF EN 894-1-1997 工作场所用信号装置的人类工程学原则 23页
NF EN 894-2-1997 机械的安全--显示器和控制驱动器设计的人机工程学要求 第2部分:显示器 25页
NF EN 894-3-2000 机械的安全性.显示和控制作动装置设计的人类工效学要求.第3部分:控制作动装置 40页
NF EN 895-1995 金属材料焊缝的破坏性试验.横向拉力试验 14页
NF EN 896-2005 Chemicals used for human consumption - Sodium hydroxide. 28页
NF EN 897-2005 Chemicals used for treatment of water intended for human consumption - Sodium carbonate. 21页
NF EN 898-2005 人饮用水处理用化学产品 碳酸氢钠 22页
NF EN 899-2003 饮用水处理用化学产品.硫酸 20页
NF EN 900-1999 人类生活用水处理用化学制品.次氯酸钙 29页
NF EN 901-1999 人类生活用水处理用化学制品.次氯酸钠 31页
NF EN 902-1999 人类生活用水处理用化学制品.过氧化氢 29页
NF EN 903-1994 水质--用测量亚甲兰指数MBAS测定离子表面活化剂 11页
NF EN 907-1997 农林机械.喷雾器和液体肥料喷撒器.安全性(欧洲标准EN 907) 20页
NF EN 908-1999 农林机械.灌溉用绕软管轮机.安全性 16页
NF EN 909-1999 农林机械.中心轴和外侧移动型灌溉机械.安全性 17页
NF EN 9100-2003 Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994). 103页
NF EN 910-1996 金属材料焊缝的破坏性试验.折叠试验 22页
NF EN 9102-2006 Aerospace series - Quality systems - First article inspection. 36页
NF EN 9103-2006 Aerospace series - Quality management systems - Variation management of key characteristics. 40页
NF EN 9104-2006 Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs. 50页
NF EN 9110-2006 Aerospace series - Quality systems - Model for quality assurance applicable to maintenance organizations. 60页
NF EN 9111-2006 Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001: 2000). 104页
NF EN 911-1995 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法 8页
NF EN 9120-2006 Aerospace series - Quality management systems - Requirements for stockist distributors - (based on ISO 9001:2000). 52页
NF EN 9121-2006 Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000). 84页
NF EN 912-1999 木紧固件.木连接件规范 36页
NF EN 913-1996 体操器材.一般安全要求和试验方法 18页
NF EN 9132-2006 Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking. 64页
NF EN 9133-2005 Aerospace series - Quality management systems - Qualification Procedure for aerospace standard parts. 17页
NF EN 914-1996 体操器材.平衡木和平衡/不对称组合木.使用、安全要求,试验方法 13页
NF EN 915-1996 体操器材.高低杠.功能和安全要求、试验方法 11页
NF EN 916-2003 体操器材.垂直面式箱.功能和安全要求、试验方法 10页
NF EN 917-1997 塑料管道系统--热塑塑料阀--耐内压性能和密封性试验方法 11页
NF EN 9200-2005 Aerospace series - Programme management - Guidelines for project management specification. 97页
NF EN 920-2000 接触食品的纸和纸板.水萃取物中干物质含量的测定 8页
NF EN 921-1995 塑料管道系统.热塑管.恒温下耐内压性的测定 12页
NF EN 922-1995 塑料管道和管道系统 非增塑聚氯乙烯(PVC-U)管道和配件 K值的粘度数和计算测定用试样制备 8页
NF EN 923-2006 粘合剂。词汇。 49页
NF EN 924-2004 胶粘剂 含溶剂和无溶剂粘合剂 闪点的测定 12页
NF EN 926-1-2006 滑翔伞.滑翔伞的鉴定.结构强度试验 13页
NF EN 926-2-2005 Paragliding equipment - Paragliders - Part 2 : requirements and test methods for classifying flight safety characteristics. 45页
NF EN 927-1-1996 色漆和清漆.室外木材用色漆产品和色漆系统.第1部分:分类和选择 14页
NF EN 927-2-2006 色漆与清漆 室外木材用涂漆材料和涂漆系统 第2部分:性能规范 15页
NF EN 927-3-2007 油漆和清漆.木材外部用涂层材料和涂层系统 第3部分:时效试验 27页
NF EN 927-4-2001 清漆和油漆.木材用涂层材料和涂层材料系统.第4部分:液体水-蒸汽渗透性评定 12页
NF EN 927-5-2001 清漆和油漆.木材用涂层材料和涂层系统.第5部分:液态水渗透性的评定 10页
NF EN 927-6-2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6 : exposure of wood coatings to artificial weathering using fluorescent UV lamps and water. 21页
NF EN 928-1996 活体外医学分析系统.活体外医疗设备用EN 29001、EN 46001、EN 29002和EN 46002的应用指南 20页
NF EN 929-1994 内河航运船舶.驱动船队.可动信号杆连接接头 10页
NF EN 930/A1-2005 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements. 13页
NF EN 930-1997 鞋、皮革和仿皮革制品生产机械--粗加工、打磨、抛光和精整机械 36页
NF EN 931/A1-2004 Footwear manufacturing machines - Lasting machines - Safety requirements. 9页
NF EN 931-1997 制鞋机械--钳邦机械--安全要求 25页
NF EN 932-1-1996 集料一般特征的试验.第1部分:抽样方法 28页
NF EN 932-2-1999 集料一般特性试验.第2部分:实验室样品还原法 16页
NF EN 932-3/A1-2004 Tests for general properties of aggregates - Part 3 : procedure and terminology for simplified petrographic description. 5页
NF EN 932-3-1996 用于测定集料一般性能的试验.第3部分:简化岩相学描述的程序和术语 15页
NF EN 932-5-2000 集料一般特性试验.第5部分:通用设备和校准 17页
NF EN 932-6-1999 集料一般特性试验.第6部分:复验性和再生性定义 13页
NF EN 933-1/A1-2006 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method. 6页
NF EN 933-10-2002 集料几何性能试验.第10部分:细度评定.填料的分级(喷气筛) 13页
NF EN 933-1-1997 集料几何性能的试验 第1部分:粒径分布测定--筛法 13页
NF EN 933-2-1996 测定集料几何性能的试验.第2部分:粒状测定--检验筛、开口的标称尺寸 7页
NF EN 933-3/A1-2004 Tests for geometrical properties of aggregates - Part 3 : determination of particle shape - Flakiness index. 6页
NF EN 933-3-1997 测定集料几何性能的试验 第3部分:粒状测定--扁平系数 11页
NF EN 933-4-2000 集料几何特性试验.第4部分:颗粒形状测定.形状索引 12页
NF EN 933-5/A1-2005 Tests for geometrical properties of aggregates - Part 5 : determination of percentage of crushed and broken surfaces in coarse aggregate particles. 5页
NF EN 933-5-1998 测定集料几何性能的试验 第5部分: 细砾石破碎表面百分比的测定 12页
NF EN 933-6-2002 集料几何特性的试验.第6部分:颗粒形状的测定.集料流系数 21页
NF EN 933-7-1998 测定集料几何特性的试验.第7部分:含贝壳成分含量的测定--细砾石中贝壳的百分比 12页
NF EN 933-8-1999 集料几何特性试验.第8部分:完整性评估,沙等效试验.(EN 933-8) 17页
NF EN 933-9-1999 集料几何特性试验.第9部分:细集料评估.次甲基蓝试验 15页
NF EN 934-2/A1-2005 Admixtures for concrete, mortar and grout - Part 2 : Concrete admixtures - Definitions, requirements, conformity, marking and labelling. 7页
NF EN 934-2/A2-2006 Admixtures for concrete, mortar and grout - Part 2 : concrete admixtures - Definitions, requirements, conformity, marking and labelling. 7页
NF EN 934-2-2002 混凝土,灰浆和灌浆外加剂.第2部分:混凝土外加剂,定义,要求,符合性,标记和标签 26页
NF EN 934-3-2004 Admixtures for concrete, mortar and grout - Part 3 : admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling. 19页
NF EN 934-4/A1-2005 Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4 : definitions, requirements, conformity, marking and labelling. 8页
NF EN 934-4-2002 混凝土、砂浆和灌浆用添加剂.第4部分:预应力钢筋束用添加剂.定义、要求、符合性、标记和标签 18页
NF EN 934-6/A1-2006 Admixtures for concrete, mortar and grout - Part 6 : sampling, conformity control and evaluation of conformity. 8页
NF EN 934-6-2002 混凝土,灰浆和灌浆混合物.第6部分:取样、合格控制及合格评定 11页
NF EN 935-2005 Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) chloride (monomeric) and aluminium iron (III) chloride hydroxide (monomeric). 20页
NF EN 936-2006 人饮用水处理用化学制品--二氧化碳 14页
NF EN 937-1999 饮用水处理用化学品.氯 25页
NF EN 938-1999 人类生活用水处理用化学制品.亚氯酸钠 34页
NF EN 939-1999 人类生活用水处理用化学制品.盐酸 29页
NF EN 940-1997 木工机械安全--组合式木工机械 35页
NF EN 941-1995 铝和铝合金.一般用途的盘形件和盘形件用坯料.规格 13页
NF EN 942-1996 细木工中的木材.木材质量的一般分类 17页
NF EN 943-1-2003 "Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1 : performance requirements for ventilated and non-ventilated ""gas-tight"" (Type 1) and ""non-gas-tight"" (Type 2) chemical protective suits 37页
NF EN 943-2-2002 防液体和气体化学制品包括液体气溶胶和固体颗粒的防护服.第2部分:急救队用气密性(1型)化学防护套服的性能要求 15页
NF EN 947-1999 Hinged or pivoted doors. Determination of the resistance to vertical load. 7页
NF EN 948-2000 Hinged or pivoted doors - Determination of the resistance to static torsion. 6页
NF EN 949-1999 Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors. 7页
NF EN 950-2000 Door leaves - Determination of the resistance to hard body impact. 7页
NF EN 951-1999 Door leaves. Method for measurement of height, width, thickness and squareness. 7页
NF EN 952-2000 门扇.普通和局部平坦性.测量方法 6页
NF EN 953-1997 机械的安全--固定和活动保护罩设计和制造的一般要求 33页
NF EN 954-1-1997 机械安全性.控制系统零部件安全.第1部分:设计一般原理(欧洲标准EN 954-1) 38页
NF EN 955-2-1995 耐火制品的化学分析--第2部分:含有硅石和/或矾土的制品(湿法) 25页
NF EN 957-10-2005 Stationary training equipment - Part 10 : exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods. 13页
NF EN 957-1-2005 固定训练设备 一般安全要求和试验方法 16页
NF EN 957-2-2003 固定锻练设备.第2部分:动力牵引设备.特定安全技术要求和补充试验方法 15页
NF EN 957-4-2006 固定锻练设备.第4部分:平衡棒架、特定安全要求和补充试验方法 10页
NF EN 957-5-1996 固定训练设备.第5部分:踏板曲柄训练装置、附加特殊安全要求和试验方法 18页
NF EN 957-6-2001 固定式训练设备.第6部分:脚踏车、附加专用安全要求和试验方法 14页
NF EN 957-7-1998 固定训练设备.第7部分:划船机械,附加特殊安全要求和检验方法 13页
NF EN 957-8-1998 固定训练设备 第8部分:爬梯机、自动楼梯和爬梯模拟机 特定安全规定和补充试验方法 14页
NF EN 957-9-2003 Stationary training equipment - Part 9 : elliptical trainers, additional specific safety requirements and test methods. 13页
NF EN 958-1996 登山和攀登设备.Via Ferrata上使用的能量吸收系统.安全要求和试验方法 10页
NF EN 959-1996 登山和攀登设备.Via Ferrata上使用的能量吸收系统.岩石上固定器材安全要求和试验方法 11页
NF EN 960-2006 防护罩试验时使用的假头 39页
NF EN 962/A1-1999 可运输的气体瓶.工业用和医用气体瓶的阀门保护帽和阀门保护装置.设计、构造和试验 6页
NF EN 962/A2-2000 可运输的气体瓶.工业和医用气体瓶的阀门保护盖和阀门保护装置.设计,构造和试验 5页
NF EN 962-1996 可运输的气体瓶.工业和医用气体瓶用阀门保护帽和阀门保护罩.设计、制造和试验 14页
NF EN 966/A1-2000 飞行运动用头盔 5页
NF EN 966/A2-2006 Helmets for airborne sports. 5页
NF EN 966-1996 空中体育头盔 30页
NF EN 969/A1-1999 气体管道用延性铁管,配件,附件和接头--要求和试验方法 5页
NF EN 969-1995 燃气管道用球墨铸铁管、管件、附件及其接头.要求和试验方法 51页
NF EN 970-1997 熔焊非破坏性检验--目检 15页
NF EN 971-1-1996 色漆和清漆.涂层材料的术语和定义.第1部分:一般术语 23页
NF EN 972-1998 制革机械.往复式滚压成形机.安全要求 49页
NF EN 973/A1-2003 Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers. 8页
NF EN 973-2003 Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers. 55页
NF EN 974-2004 Chemicals used for treatment of water intended for human consumption - Phosphoric acid. 23页
NF EN 975-1/A1-2000 锯材.阔叶树木材按外观分类.第1部分:橡树和山毛榉 21页
NF EN 975-1-1995 锯木.叶子茂盛木材外观分类.第1部分:橡树和山毛榉 32页
NF EN 975-2-2004 锯材.硬木按表观分级.第2部分:白杨木 10页
NF EN 976-1-1997 玻璃增强塑料(GRP)制地下油罐.储存液化石油基燃油用卧式圆柱形非压力油罐.第1部分:单壁罐的要求和试验方法 18页
NF EN 976-2-1997 玻璃增强塑料(GRP)制地下油罐.储存液化石油基燃油用卧式圆柱形非压力油罐.第2部分:单壁罐的运输、装卸、储存和安装 24页
NF EN 977-1997 玻璃纤维增强式塑料制地下油罐.单面暴露于流体环境的试验方法 9页
NF EN 978-1997 玻璃纤维增强式塑料制地下油罐.系数α和β的测定 13页
NF EN 980-2004 Graphical symbols for use in the labelling of medical devices. 26页
NF EN 981-1997 机械的安全--可听和可视危险信号和信息信号系统 13页
NF EN 98-1991 瓷砖和瓷板.尺寸性能测量和表面外观 9页
NF EN 982-1996 机器安全.有关系统及其液压和气动传动部件的安全规定.液压部件 24页
NF EN 983-1996 机器安全.有关系统及其液压和气动传动部件的安全规定.气动部件 21页
NF EN 984-2002 纺织地毯.针刺地毯使用表面单位面积重量的测定 6页
NF EN 985-2001 纺织地毯.小脚轮椅试验 12页
NF EN 986-2006 铺地织物--铺瓦--在不同的水、热条件以及平面变形下尺寸变化的测定 8页
NF EN 988-1996 锌及锌合金.建筑用平轧材规范 16页
NF EN 989-1995 "推出"试验法测定钢筋和高压蒸养加气混凝土间的胶合性能 10页
NF EN 990-2003 热压处理的多孔混凝土和开结构式轻骨料混凝土中钢筋耐腐蚀性检验的试验方法 9页
NF EN 991-1995 热压处理过的多孔混凝土或开结构式轻骨料混凝土制配钢筋的预制件尺寸测定 9页
NF EN 99-1991 瓷砖和瓷板.吸水性测定 4页
NF EN 992-1995 开结构式轻骨料混凝土干密度的测定 8页
NF EN 993-10-1998 成形致密耐火制品的试验方法 第10部分:加热时尺寸永久性变化的测定 12页
NF EN 993-1-1995 密实成形耐火产品的试验方法.第1部分:表面密度开式孔隙率和全部孔隙率的测定 11页
NF EN 993-12-1997 密致定型耐火制品--测温锥等值(耐火度)的测定 12页
NF EN 993-13-1995 密实成形耐火产品的试验方法.第13部分:实验室用参考测温锥的规格 9页
NF EN 993-14-1998 致密异型耐火制品的试验方法.第14部分:热丝(交叉排列)测量法测定热传导率 13页
NF EN 993-15-2005 Methods of test for dense shaped refractory products - Part 15 : determination of thermal conductivity by the hot-wire (parallel) method. 19页
NF EN 993-16-1995 密实的定型耐火制品.试验方法.第16部分:耐硫酸性的测定 8页
NF EN 993-17-1999 密实成型耐火制品试验方法.第17部分:真空水银法测定粒状材料松密度 13页
NF EN 993-18-2002 致密成型耐火产品的试验方法.第18部分:用真空渗水法测定颗粒材料的容积密度 11页
NF EN 993-19-2004 致密成型耐火制品检验方法.第19部分:由差动法测定热膨胀性 13页
NF EN 993-2/A1-2004 密实成型耐火产品的试验方法.第2部分:实密度的测定 5页
NF EN 993-20-2004 致密成型耐火制品检验方法.第20部分:环境温度下抗磨性的测定 12页
NF EN 993-2-1995 密实成形耐火产品的试验方法.第2部分:绝对密度的测定 10页
NF EN 993-3-1997 成形致密耐火陶瓷的试验方法 第3部分:含碳耐火材料的试验方法 13页
NF EN 993-4-1995 密实成形耐火产品的试验方法.第4部分:透气性的测定 13页
NF EN 993-5-1999 致密异型耐火产品的试验方法.第5部分:冷破裂强度的测定 10页
NF EN 993-6-1995 密度成形耐火产品的试验方法.第6部分:环境温度下弯曲断裂模数的测定 9页
NF EN 993-7-1998 高温弯曲时、断裂系数的测定。 11页
NF EN 993-8-1997 成形致密耐火产品的试验方法 第8部分:负载下耐火性的测定 15页
NF EN 993-9-1997 成形致密耐火产品的试验方法 第9部分:压缩蠕变的测定 15页
NF EN 994-1995 纺织地毯.面砖的边长度、直度和斜角的测定 7页
NF EN 995-1995 纺织地毯.衬底蠕变评定 6页
NF EN 996/A1-1999 打桩设备.安全规定 5页
NF EN 996/A2-2003 Piling equipment - Safety requirements. 17页
NF EN 996-1996 打桩设备.安全要求 51页
NF EN 997-2004 WC pans and WC suites with integral trap. 46页
NF EN 998-1-2004 Specification for mortar for masonry - Part 1 : rendering and plastering mortar. 21页
NF EN 998-2-2004 Specification for mortar for masonry - Part 2 : masonry mortar. 24页
NF EN 999-1998 机械的安全性.人体接近机械的速度的防护设备的定位.(欧洲标准EN999) 22页
NF EN ISO 10012-2003 Measurement management systems - Requirements for measurement processes and measuring equipment. 33页
NF EN ISO 10042-2006 弧焊铝接头和可焊接的铝合金.缺陷检验标准指南 27页
NF EN ISO 10052-2005 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method. 39页
NF EN ISO 10058-1996 菱美矿和白云石.化学分析 26页
NF EN ISO 10062-1995 污染气体浓度的极低的人工环境下腐蚀试验 14页
NF EN ISO 10066-1998 软质泡沫聚合材料--压缩蠕变的测定 8页
NF EN ISO 10075-1-2000 与脑力工作负荷有关的人类工效学原理.第1部分:一般术语和定义 10页
NF EN ISO 10075-2-2000 与脑力工作负载有关的人类工效学原理.第2部分:设计原理 20页
NF EN ISO 10075-3-2005 Ergonomic principles related to mental workload - Part 3 : principles and requirements concerning methods for measuring and assessing mental workload. 24页
NF EN ISO 10077-1-2000 门窗和百叶窗的热性能.热传递系数的计算.第1部分:简化法 36页
NF EN ISO 10077-2-2004 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2 : numerical method for frames. 31页
NF EN ISO 10079-1-2001 医疗用抽吸设备.第1部分:电动抽吸设备.安全要求 41页
NF EN ISO 10079-2-2001 医疗用抽吸设备.第2部分:手动抽吸设备 25页
NF EN ISO 10079-3-2001 医疗用抽吸设备.第3部分:真空或压力源驱动的抽吸设备 31页
NF EN ISO 10081-1-2005 Classification of dense shaped refractory products - Part 1 : alumina-silica. 9页
NF EN ISO 10081-2-2005 Classification of dense shaped refractory products - Part 2 : basic products containing less than 7 % residual carbon. 10页
NF EN ISO 10081-3-2005 Classification of dense shaped refractory products - Part 3 : basic products containing from 7 % to 50 % residual carbon. 12页
NF EN ISO 10082-2000 塑料.酚醛树脂.定义和试验方法 18页
NF EN ISO 10087-2006 小艇.船体标识.编码体系 12页
NF EN ISO 10088-2001 小艇.永久性安装的燃料系统和固定的燃料箱 24页
NF EN ISO 10093-1999 塑料.燃烧试验.标准火源 30页
NF EN ISO 10101-1-1998 天然气.用卡尔.费歇尔法测定水分.第1部分:说明 (欧洲标准EN ISO 10101-1) 8页
NF EN ISO 10101-2-1998 天然气.用卡尔.费歇尔法测定水分.第2部分:滴定测量程序 (欧洲标准EN ISO 10101-2) 13页
NF EN ISO 10101-3-1998 天然气.用卡尔.费歇尔法测定水分.第3部分:库仑测量法 (欧洲标准EN ISO 10101-3) 11页
NF EN ISO 10111-2002 金属和其它无机覆层.单位面积质量的测量.重量分析法和化学分析方法述评 25页
NF EN ISO 10133-2001 小艇.电气系统.超低压直流装置 26页
NF EN ISO 10139-1-2005 Dentistry - Soft lining materials for removable dentures - Part 1 : materials for short-term use. 22页
NF EN ISO 10139-2-2002 牙科.活动假牙用软衬材料.第2部分:长期使用的材料 14页
NF EN ISO 10156-2-2006 Gas cylinders - Gases and gas mixtures - Part 2 : determination of oxidizing ability of toxic and corrosive gases and gas mixtures. 13页
NF EN ISO 10202-6-1996 金融交易卡.使用集成电路卡的金融交易系统的安全结构.第6部分:卡携带人的核对 10页
NF EN ISO 10209-2-1996 产品技术文件.词汇.第2部分:有关投影法的术语 20页
NF EN ISO 10211-1-1995 建筑物中热桥.热流和表面温度.第1部分:一般计算方法 60页
NF EN ISO 10211-2-2002 房屋建筑中的热桥.热流量和表面温度的计算.第2部分:线性热桥 25页
NF EN ISO 10218-1-2006 Robots for industrial environments - Safety requirements - Part 1 : robot. 38页
NF EN ISO 10239-2001 小艇.液化石油气 (LPG)系统 24页
NF EN ISO 10240-2005 游艇.性能手册 26页
NF EN ISO 10248-1999 流体肥料.用液膜除雾法进行悬浮样品脱水 6页
NF EN ISO 10249-1999 流体肥料.物理试验用样品的初步目视检验和制备 9页
NF EN ISO 10253-2006 水质--用Skeletonema costatum和Phaeodactylum tricornutum进行海洋藻类抑制试验 18页
NF EN ISO 10256-2004 Head and face protection for use in ice hockey. 59页
NF EN ISO 10271-2002 牙科用金属材料.抗腐蚀试验方法 34页
NF EN ISO 10272-1-2006 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1 : detection method. 28页
NF EN ISO 10273-2003 微生物学.被推定为致病的耶尔森氏菌属结肠耶氏菌的研究一般导则 43页
NF EN ISO 10280-1995 钢铁.钛含量的测定.二安替比林分光光度法 13页
NF EN ISO 10283-2006 Binders for paints and varnishes - Determination of monomeric diisocyanates in polyisocyanate resins. 20页
NF EN ISO 10289-2001 金属基体上的金属和其他无机覆层腐蚀试验方法.经受腐蚀试验的试样和制成品的额定值 30页
NF EN ISO 10297-2006 气瓶.气瓶阀门.规范和认可试验 38页
NF EN ISO 10301-1997 水质 高挥发性有机卤化烃含量测定 气相色谱法 51页
NF EN ISO 10303-210-2003 Industrial automation systems and integration - Product data representation and exchange - Part 210 : application protocol : electronic assembly, interconnection and packaging design. 4548页
NF EN ISO 10304-1-1995 水质--用液态离子色谱法测定溶解的氟化物、氯化物、亚磷酸盐、溴化物、硝酸盐和硫酸离子 第1部分:低污染水的测定方法 19页
NF EN ISO 10304-2-1996 水质.气相离子色谱法.测定溶解的阳离子含量.第2部分:废水中溴化物离子、氯离子、硝酸盐离子、正磷酸盐互硝酸盐离子和硫酸盐离子的含量测定 24页
NF EN ISO 10304-3-1997 水质.用液态离子色谱法测定溶解的阴离子.第3部分:铬酸盐、碘化物、亚硫酸盐、硫氰酸盐和硫代硫酸酯的测定 32页
NF EN ISO 10304-4-1999 水质.用离子的液态色谱法测定溶解的阴离子.第4部分:低污染水中氯酸盐、氯化物、亚氯酸盐的测定 23页
NF EN ISO 10306-1995 纺织.棉纤维.过堂风法评价成熟 11页
NF EN ISO 10308-2006 金属覆层.孔隙率检验审查 39页
NF EN ISO 10318-2006 Geosynthetics - Terms and definitions. 44页
NF EN ISO 10319-1996 铺地织物.宽带抗拉试验 13页
NF EN ISO 10320-2000 土工织物及其相关制品.现场鉴别 6页
NF EN ISO 10321-1996 铺地织物.用宽带度法进行接头/缝隙的抗拉试验 12页
NF EN ISO 10322-1-2006 Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1 : specifications for single-vision and multifocal lens blanks. 16页
NF EN ISO 10322-2-2006 Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2 : specifications for progressive power lens blanks. 14页
NF EN ISO 10323-1996 牙科用旋转器械.盘片和轮的内径 5页
NF EN ISO 10328-2006 Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods. 157页
NF EN ISO 10341-1999 眼科仪器.折射透镜突出部 14页
NF EN ISO 10342-2003 Ophthalmic instruments - Eye refractometers. 10页
NF EN ISO 10343-1999 眼科仪器.眼膜曲率计 12页
NF EN ISO 10350-1-2000 塑料制品.可比较的单点数据的采集和表示法.第1部分:模制材料 19页
NF EN ISO 10350-2-2002 塑料制品.可比较的单点数据的采集和表示法.第2部分:长纤维增强式塑料制品 17页
NF EN ISO 10352-1997 增强塑料 预浸渍 表面质量的测定 10页
NF EN ISO 10360-1-2001 几何产品规范(GPS).坐标测量机(CMM)的验收和再验证实验.第1部分:词汇 54页
NF EN ISO 10360-2-2002 几何产品规范(GPS).坐标测量机(CMM)的验收和重新验证的试验.第2部分:测量尺寸的坐标测量机 21页
NF EN ISO 10360-3-2000 几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第3部分:以旋转台的轴线作为第四条轴线的坐标式测量设备 20页
NF EN ISO 10360-4-2000 几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第4部分:扫描测量法用坐标式测量设备(CMM) 20页
NF EN ISO 10360-5-2001 几何产品规范(GPS).坐标测量机(CMM)的验收和再验证实验.第5部分:使用多尖笔探针系统的坐标测量机 21页
NF EN ISO 10360-6-2002 几何产品规范(GPS).坐标测量机(CMM)的验收和重新验证试验.第6部分:对计算高斯相关特征中出现错误的估计 29页
NF EN ISO 10363-1995 热溶粘合剂.热稳定性的测定 7页
NF EN ISO 10365-1995 胶合剂.主要断裂的外观裂纹命名 7页
NF EN ISO 10366-1-2004 Plastics - Methylmethacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1 : designation system and basis for specifications. 16页
NF EN ISO 10366-2-2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties. 18页
NF EN ISO 10370-1995 石油产品--炭渣的测定--微量方法 13页
NF EN ISO 10374-1998 货运集装箱.自动识别. 22页
NF EN ISO 10380-2003 波纹状可弯曲管和金属弯管 25页
NF EN ISO 10417-2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress. 43页
NF EN ISO 10418-2004 Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems. 123页
NF EN ISO 1042-2000 带划线的测量烧瓶。 12页
NF EN ISO 10423-2005 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment. 419页
NF EN ISO 10424-1-2005 Petroleum and natural gas industries - Rotary drilling equipment - Part 1 : rotary drill stem elements. 76页
NF EN ISO 10426-1-2007 石油和天然气工业.油井灌浆用水泥和材料.第1部分:规范 48页
NF EN ISO 10426-2/A1-2005 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2 : testing of well cements - Amendment 1 : water-wetting capability testing. 9页
NF EN ISO 10426-2-2004 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2 : testing of well cements. 186页
NF EN ISO 10426-3-2005 Petroleum and natural gas industries - Cements and materials for well cementing - Part 3 : testing of deepwater well cement formulations. 24页
NF EN ISO 10426-4-2005 Petroleum and natural gas industries - Cements and materials for well cementing - Part 4 : preparation and testing of foamed cement slurries at atmospheric pressure. 23页
NF EN ISO 10426-5-2006 Petroleum and natural gas industries - Cements and materials for well cementing - Part 5 : determination of shrinkage and expansion of well cement formulations at atmospheric pressure. 23页
NF EN ISO 10427-1-2002 石油和天然气工业.套管扶正器.第1部分:弓形弹簧式套管扶正器 18页
NF EN ISO 10427-2-2004 Petroleum and natural gas industries - Equipment for well cementing - Part 2 : centralizer placement and stop-collar testing. 26页
NF EN ISO 10427-3-2005 Petroleum and natural gas industries - Equipment for well cementing - Part 3 : performance testing of cementing float equiment. 21页
NF EN ISO 1043-1-2002 塑料.符号.第1部分:基本聚合物及其特性 19页
NF EN ISO 1043-2-2002 塑料制品.符号和缩略语.第2部分:填充剂和加强材料 6页
NF EN ISO 10432-2005 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment. 89页
NF EN ISO 1043-3-1999 塑料制品.符号和缩略术语.第3部分:增塑剂 10页
NF EN ISO 1043-4-1999 塑料制品.符号和缩略语.第4部分:阻燃剂 9页
NF EN ISO 10434-2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries. 42页
NF EN ISO 10437-2004 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications. 134页
NF EN ISO 10438-1-2004 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : general requirements. 64页
NF EN ISO 10438-2-2004 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2 : special-purpose oil systems. 92页
NF EN ISO 10438-3-2004 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3 : general-purpose oil systems. 50页
NF EN ISO 10438-4-2004 Petroleum, petrochemical and natural gas industries - Lubrification, shaft-sealing and control-oil systems and auxiliaries - Part 4 : self-acting gas seal support systems. 46页
NF EN ISO 10439-2003 Petroleum, chemical and gas service industries - Centrifugal compressors. 139页
NF EN ISO 10440-1-2002 石油和天然气工业.旋转式正排量压缩机.第1部分:加工压缩机( 无油 ) 59页
NF EN ISO 10440-2-2002 石油和天然气工业.旋转式正排量压缩机.第2部分:封装空气压缩机(无油) 53页
NF EN ISO 10441-2000 石油和天然气工业.机械动力传输用柔性耦合.专用 45页
NF EN ISO 10442-2003 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors. 86页
NF EN ISO 10451-2002 牙科植入物.工艺性能.材料检验 15页
NF EN ISO 10456-2001 建筑材料和制品.确定申报和设计热值的程序 27页
NF EN ISO 10472-1-1998 工业洗衣机安全要求.第1部分:一般要求 31页
NF EN ISO 10472-2-1998 工业用洗衣设备的安全要求 第2部分:洗衣机和脱水机 27页
NF EN ISO 10472-3-1998 工业用洗衣设备的安全要求 第3部分:包括单机在内的洗涤流水线 22页
NF EN ISO 10472-4-1998 工业用洗衣设备的安全要求 第4部分:空气干燥机 21页
NF EN ISO 10472-5-1998 工业用洗衣设备的安全要求 第5部分:家用平整织物用熨烫机,进料机和折叠机 28页
NF EN ISO 10472-6-1998 工业用洗衣设备的安全要求 第6部分:熨烫和热粘合压机 20页
NF EN ISO 10477-2005 Dentistry - Polymer-based crown and bridge materials. 30页
NF EN ISO 10484-2004 Widening test on nuts. 9页
NF EN ISO 10485-2004 Cone proof load test on nuts. 8页
NF EN ISO 10497-2004 Testing of valves - Fire type-testing requirements. 29页
NF EN ISO 10504-2000 淀粉衍生物.葡萄糖浆、果糖浆和氢化葡萄糖浆组成的测定.高效液相色谱法 13页
NF EN ISO 10510-1999 自攻螺钉和平垫圈组合件 9页
NF EN ISO 10511-1997 非金属嵌件六角锁紧薄螺母 10页
NF EN ISO 10512-1997 1型非金属嵌件六角锁紧薄螺母--性能等级6、8和10级 10页
NF EN ISO 10513-1997 2型全金属细距六角锁紧螺母--性能等级8、10和12级 10页
NF EN ISO 10519-2001 油菜籽.叶绿素含量的测定.光谱测定法 11页
NF EN ISO 10520-1998 本地淀粉.淀粉含量测定.尤尔斯氏旋光方法 13页
NF EN ISO 10524-1-2006 Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices. 40页
NF EN ISO 10524-2-2006 Pressure regulators for use with medical gases - Part 2 : manifold and line pressure regulators. 41页
NF EN ISO 10524-3-2006 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves. 48页
NF EN ISO 10528-1995 纺织品.织物可燃性试验前的商业洗涤程序 11页
NF EN ISO 10534-1-2003 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1 : method using standing wave ratio. 29页
NF EN ISO 10534-2-2003 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2 : transfer-function method. 36页
NF EN ISO 10535-1999 Hoists for the transfer of disabled persons. Requirements and test methods. 44页
NF EN ISO 10539-2002 动植物脂肪和油.碱度的测定 12页
NF EN ISO 10545-10-1997 陶瓷砖 第10部分:湿膨胀测定 8页
NF EN ISO 10545-11-1996 陶瓷方砖和面板.第11部分:釉砖抗龟裂性的测定 7页
NF EN ISO 10545-1-1997 陶瓷砖 第1部分:抽样和验收条件 10页
NF EN ISO 10545-12-1997 陶瓷砖 第12部分:耐冰冻测定 7页
NF EN ISO 10545-13-1997 陶瓷砖 第13部分:耐化学测定 10页
NF EN ISO 10545-14-1997 陶瓷砖 第14部分:耐污染测定 11页
NF EN ISO 10545-15-1997 陶瓷砖 第15部分:素烧砖释放出铅和镉的测定 8页
NF EN ISO 10545-16-2001 瓷砖.第16部分:小色差测定 9页
NF EN ISO 10545-2-1997 陶瓷砖 第2部分:尺寸和表面质量的测定 13页
NF EN ISO 10545-3-1997 陶瓷砖 第3部分:吸水率、表观气孔、表观相对密度和堆积密度的测定 8页
NF EN ISO 10545-4-1997 陶瓷砖 第4部分:断裂和破碎强度的模数测定 9页
NF EN ISO 10545-5-1998 陶瓷方砖和面板 第5部分: 用测量抗冲系数法测定耐冲击性 11页
NF EN ISO 10545-6-1997 陶瓷砖 第6部分:素烧砖耐磨蚀测定 9页
NF EN ISO 10545-7-1999 瓷砖.第7部分:釉面砖表面耐磨损性测定.(EN ISO 10545-7) 14页
NF EN ISO 10545-8-1996 陶瓷方砖和面板.第8部分:热源线性能膨胀的测定 6页
NF EN ISO 10545-9-1996 陶瓷方砖和面板.第9部分:耐热冲击强度的测定 6页
NF EN ISO 10548-2004 碳纤维 油化率测定 16页
NF EN ISO 10551-2001 热环境的人类工效学.使用主观判断尺度评定热环境的影响 26页
NF EN ISO 10555-1/A1-2000 不可重复使用的消毒血管内导管.第1部分:一般规定 7页
NF EN ISO 10555-1/A2-2004 Sterile, single-use intravascular catheters - Part 1 : general requirements. 9页
NF EN ISO 10555-1-1997 一次性使用的无菌血管内导管.第1部分:一般要求 17页
NF EN ISO 10555-2-1997 一次性使用无菌血管内导管 第2部分:血管照相用导管 13页
NF EN ISO 10555-3-1997 一次性使用无菌血管内导管 第3部分:中枢静脉导管 13页
NF EN ISO 10555-4-1997 一次性使用无菌血管内导管 第4部分:气球扩张导管 13页
NF EN ISO 10555-5/A1-2001 一次性使用的无菌血管内导管.第5部分:与针头相连接的辅助导管 7页
NF EN ISO 10555-5-1997 一次性使用无菌血管内导管 第5部分:针头辅助导管 19页
NF EN ISO 10563-2005 房屋建筑--接缝的密封剂--质量与容积变化的测定 9页
NF EN ISO 10564-1997 软钎焊材料和硬焊材料.软焊料分析取样方法(欧洲标准EN ISO 10564) 7页
NF EN ISO 10565-1998 油籽--油和水含量的同时测定--使用脉冲核磁共振光谱测定法 16页
NF EN ISO 10590-2005 房屋建筑--密封剂--受水浸渍后保持延伸性的胶粘/粘合性能的测定 11页
NF EN ISO 10591-2005 房屋建筑--密封剂--受水浸渍后胶粘/粘合性能的测定 11页
NF EN ISO 10592/A1-2000 小艇.液压操舵系统 5页
NF EN ISO 10592-1995 游艇--液压驾驶系统 15页
NF EN ISO 105-A01-1996 纺织.染色牢度试验.第A01部分:进行试验的一般原则 14页
NF EN ISO 105-A04-1999 纺织.染色牢度试验.第A04部分:相近织物脱色度评定用仪器方法 7页
NF EN ISO 105-A05-1997 纺织品 染色牢度试验 第A05部分:灰色等级转换用颜色变化的仪器评定 9页
NF EN ISO 105-A06-1997 纺织品 染色牢度试验 第A06部分:1/1标准颜色深度的仪器测定 9页
NF EN ISO 105-A08-2003 Textiles - Tests for colour fastness - Part A08 : vocabulary used in colour measurement. 10页
NF EN ISO 105-B01-2001 纺织品.色牢度试验.第B01部分:耐光色牢度:日光 21页
NF EN ISO 105-B02/A1-2002 纺织品.色牢度试验.第B02部分:耐人造光色牢度:氙弧灯试验 9页
NF EN ISO 105-B02-1999 纺织品.色牢度试验.第B02部分:耐人造光源色牢度.氙弧 24页
NF EN ISO 105-B03-1997 纺织品 染色牢度试验 第B03部分:耐气候染色牢度试验:室外暴露 11页
NF EN ISO 105-B04-1997 纺织品 染色牢度试验 第B04部分:耐人工气候染色牢度:氙弧灯 13页
NF EN ISO 105-B05-1996 纺织.染色牢度试验.第B05部分:光色互变检验和评定 8页
NF EN ISO 105-B06-2004 Textiles - Tests for colour fastness - Part B06 : colour fastness and ageing to artificial light at high temperatures : Xenon arc fading lamp test. 32页
NF EN ISO 105-B08-2000 纺织品.色牢度试验.第B08部分:优质有光泽羊毛参比材料1~7的质量控制 13页
NF EN ISO 105-C06-1997 纺织品 染色牢度试验 第C06部分:耐家庭和工业洗涤的染色牢度 12页
NF EN ISO 105-C07-2002 纺织品.色牢度试验.第C07部分:涂料印花纺织品耐湿擦洗的色牢度 9页
NF EN ISO 105-C08-2003 Textiles - Tests for colour fastness - Part C08 : colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator. 19页
NF EN ISO 105-C09-2003 Textiles - Tests for colour fastness - Part C09 : colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator. 13页
NF EN ISO 105-C12-2006 Textiles - Tests for colour fastness - Part C12 : colour fastness to industrial laundering. 15页
NF EN ISO 105-D01-1995 纺织品--色牢度试验--第D01部分:耐干洗色牢度 8页
NF EN ISO 105-D02-1996 纺织.染色牢度试验.第D02部分:摩擦染色牢度:有机溶剂 7页
NF EN ISO 105-E01-1996 纺织.染色牢度的试验.第E01部分:水中染色牢度 8页
NF EN ISO 105-E02-1996 纺织.染色牢度的试验.第E02部分:海水中染色牢度 8页
NF EN ISO 105-E03-1996 纺织品.色牢度试验.第E03部分:耐氯水色牢度(游泳池水) 8页
NF EN ISO 105-E04-1996 纺织.染色牢度的试验.第E04部分:汗水中染色牢度 8页
NF EN ISO 105-E05-2006 纺织品 染色牢度试验 第E05部分:耐酸滴染色牢度 11页
NF EN ISO 105-E06-2006 纺织品 染色牢度试验 第E06部分:耐碱滴染色牢度 11页
NF EN ISO 105-E07-1997 纺织品 染色牢度试验 第E07部分:耐水滴染色牢度 7页
NF EN ISO 105-E08-1996 纺织品.色牢度试验.第E08部分:耐热水浸色牢度 8页
NF EN ISO 105-E09-1997 纺织品 染色牢度试验 第E09部分:耐沸水蒸呢染色牢度 7页
NF EN ISO 105-E10-1996 纺织品.色牢度试验.第E10部分:耐蒸煮色牢度 9页
NF EN ISO 105-E11-1997 纺织品.色牢度试验.第E11部分:耐常压汽蒸色牢度 8页
NF EN ISO 105-E12/A1-2003 Textiles - Tests for colour fastness - Part E12 : colour fastness to milling : alkaline milling. 7页
NF EN ISO 105-E12-1997 纺织品 染色牢度试验 第E12部分:耐缩?染色牢度:碱性缩绒 9页
NF EN ISO 105-E13-1997 纺织品--色牢度试验--第E13部分:耐剧烈酸性毡合色牢度 7页
NF EN ISO 105-E14-1997 纺织品--色牢度试验.第E14部分:耐温和酸性毡合色牢度 7页
NF EN ISO 105-G01-1996 印染牢度试验。耐氧化氮牢度 13页
NF EN ISO 105-G02-1997 纺织.色牢度试验.第G02部分:耐燃烧废气烟熏色牢度(欧洲标准EN ISO 105-G02) 12页
NF EN ISO 105-G03-1997 纺织品 染色牢度试验 第G03部分: 耐大气中臭氧的染色牢度 11页
NF EN ISO 105-J01-2000 纺织品.色牢度试验.第J01部分:表面颜色测量的一般规则 17页
NF EN ISO 105-J02-2001 纺织品.色牢度试验.第J02部分:相对白度的仪器评定 11页
NF EN ISO 105-J03-1998 纺织.色牢度试验.第J03部分:色差计算(欧洲标准 EN ISO 105-J03) 12页
NF EN ISO 105-N01-1995 纺织品--色牢度试验--第N01部分:耐漂白的色牢度:次氯酸盐 8页
NF EN ISO 105-N02-1995 纺织.染色牢度试验.第N02部分:耐漂白剂色牢度:过氧化物 9页
NF EN ISO 105-N03-1995 印染牢度试验。耐漂白牢度。氯化钠 8页
NF EN ISO 105-N04-1995 纺织.染色牢度.第N04部分:耐漂白剂色牢度:亚氯酸钠(剧烈试验) 8页
NF EN ISO 105-N05-1995 纺织.染色牢度试验.第N05部分:耐硫染色牢度 9页
NF EN ISO 105-P01-1995 印染牢度试验。耐摺牢度。蒸气摺皱 9页
NF EN ISO 105-P02-2005 纺织.染色牢度试验.第P02部分:折迭染色牢度:蒸气折迭 14页
NF EN ISO 105-S01-1996 纺织.染色牢度试验.第S01部分:硫化染色牢度.热空气 7页
NF EN ISO 105-S02-1996 纺织.染色牢度试验.第S02部分:硫化染色牢度:一氯化硫 8页
NF EN ISO 105-S03-1996 印染牢度试验。耐硫化牢度。饱和蒸气 8页
NF EN ISO 105-X01-1996 纺织品.色牢度试验.第X01部分:耐碳化色牢度.氯化铝法 7页
NF EN ISO 105-X02-1996 纺织品.色牢度试验.第X02部分:耐碳化色牢度.硫酸法 7页
NF EN ISO 105-X04-1997 纺织品 染色牢度试验 第X04部分:耐丝光处理染色牢度 8页
NF EN ISO 105-X05-1997 纺织品 染色牢度试验 第X05部分:耐有机溶剂染色牢度 9页
NF EN ISO 105-X06-1997 纺织品 染色牢度试验 第X06部分:耐自由空气下煮炼染色牢度 8页
NF EN ISO 105-X07-1997 纺织品 染色牢度试验 第X07部分:耐套染色牢度:羊毛 8页
NF EN ISO 105-X08-1997 纺织品 染色牢度试验 第X08部分:耐脱胶染色牢度 8页
NF EN ISO 105-X09-1996 纺织品.色牢度试验.第X09部分:耐甲醛色牢度 7页
NF EN ISO 105-X10-1996 纺织品.色牢度试验.第X10部分:纺织色向聚氯乙烯涂层的化学迁移的评定 7页
NF EN ISO 105-X11-1996 纺织品.色牢度试验.第X11部分:耐热压色牢度 9页
NF EN ISO 105-X12-2003 纺织品--色牢度试验--第X12部分:耐摩擦色牢度 12页
NF EN ISO 105-X13-1997 纺织品 染色牢度试验 第X13部分: 为耐折皱、裥褶和定型用化学品对羊毛进行处理的染色牢度 10页
NF EN ISO 105-X14-1997 纺织品 染色牢度试验 第X14部分:羊毛耐酸性氯化染色牢度: 二氯异氰尿酸钠 8页
NF EN ISO 105-X16-2003 Textiles - Tests for colour fastness - Part X16 : colour fastness to rubbing - Small areas. 12页
NF EN ISO 105-Z01-1996 纺织品.色牢度试验.第Z01部分:耐染浴中金属的色牢度.铬盐 7页
NF EN ISO 105-Z02-1996 印染牢度试验。在铁和铜染料溶液中耐金属牢度 7页
NF EN ISO 105-Z03-1998 纺织品 染色牢度试验 第Z03部分:聚丙烯腈纤维用碱性染料的互相兼容性 11页
NF EN ISO 105-Z04-1998 纺织品 染色牢度试验 第Z04部分: 分散染料的分散性 11页
NF EN ISO 105-Z05-1998 纺织品 染色牢度试验 第Z05部分:染料喷射性能的测定 20页
NF EN ISO 105-Z06-2000 纺织品.色牢度试验.第Z06部分:染料和涂料颜色泳移的评价 12页
NF EN ISO 105-Z07-1998 纺织品 染色牢度试验 第Z07部分:水溶性染料的可溶性和溶液稳定性的测定 11页
NF EN ISO 105-Z08-1998 纺织品 染色牢度试验 第Z08部分:活性染料在电解液中的可溶性和溶液稳定性的测定 12页
NF EN ISO 105-Z09-1998 纺织品 染色牢度试验 第Z09部分: 水溶性染料在冷水中溶解性的测定 10页
NF EN ISO 105-Z10-2000 印染牢度试验。在亚铬盐染料溶液中耐金属牢度 15页
NF EN ISO 105-Z11-2000 纺织品.色牢度试验.第Z11部分:染色剂扩散斑点的评价 10页
NF EN ISO 1060-1-1999 氯乙烯均聚物和共聚物树脂.第2部分:性能测定 13页
NF EN ISO 1060-2-1999 塑料制品.氯乙烯的均聚物和共聚物树脂.第2部分:试样的制备和性能的测定 10页
NF EN ISO 1061-1999 塑料.未增塑醋酸纤维素.游离酸度的测定 7页
NF EN ISO 10618-2005 碳纤维 树脂浸渍纱线拉伸性能的测定 25页
NF EN ISO 10628-2002 加工工厂的流程图.总则 72页
NF EN ISO 10634-1995 水质.难溶解在水中的有机化合物在含水解质中生物可降解性后期评价的处理和制备指南 14页
NF EN ISO 10637-2001 牙科设备.高容量和中容量抽吸系统 27页
NF EN ISO 10642-2004 Hexagon socket countersunk head screws. 17页
NF EN ISO 10644-1998 带普通垫圈的螺钉和垫圈组件.垫圈强度等级为200 HV和300 HV. 13页
NF EN ISO 10650-1-2006 Dentistry - Powered polymerization activators - Part 1 : quartz tungsten halogen lamps. 29页
NF EN ISO 10651-2-2004 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2 : home care ventilators for ventilator-dependent patients. 47页
NF EN ISO 10651-4-2002 肺部呼吸器.第4部分:操作员控制的人工呼吸器的特殊要求 29页
NF EN ISO 10651-6-2004 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6 : home care ventilatory support devices. 40页
NF EN ISO 10664-2005 紧固件--六瓣凹X形 13页
NF EN ISO 10666-1999 自钻自攻螺钉.机械和功能性能 11页
NF EN ISO 10669-1999 自攻螺钉和垫圈组合件用平垫圈.标准和大系列.产品等级A级 9页
NF EN ISO 10673-1998 螺钉和垫圈组件用普通垫圈.小型、常规型和大型系列.A级产品 11页
NF EN ISO 10683-2000 紧固件.非电解用锌片涂覆层 18页
NF EN ISO 10684-2004 Fasteners - Hot dip galvanized coatings. 30页
NF EN ISO 10692-1-2001 气体瓶.微电子工业用气体瓶阀门的连接件.第1部分:输出口连接件 25页
NF EN ISO 10692-2-2001 气体瓶.微电子工业用气体瓶阀连接件.第2部分:气体瓶与阀门连接件的规范和类型试验 15页
NF EN ISO 10695-2000 水的试验--莠去津和西玛津的测定--液-液提取后的气相色谱法 30页
NF EN ISO 10700-1995 钢铁.锰含量的测定.火焰原子吸收光谱测定法 16页
NF EN ISO 10705-1-2001 水质.噬菌体的检测和计数.第1部分:特殊F-RNA的噬菌体的计数 19页
NF EN ISO 10705-2-2001 水质.噬菌体的检测和计数.第2部分:体内大肠杆菌噬菌体的计数 25页
NF EN ISO 10707-1998 水质--有机化合物在水介质中极限需氧生物降解能力的评定--生物化学需氧量分析法(闭瓶试验) 16页
NF EN ISO 1071-2003 焊接. 手工铸铁电弧焊用药皮焊条. 符号. 规范. 20页
NF EN ISO 10712-1996 水质.假单胞菌属putida生长抑制试验(假单胞菌属细胞增长抑制试验) 15页
NF EN ISO 10714-2002 钢铁.磷含量的测定.磷钒钼酸盐分光光度计法 14页
NF EN ISO 10715-2001 天然气.取样指南 51页
NF EN ISO 10723-2004 Natural gas - Performance evaluation for on-line analytical systems. 54页
NF EN ISO 10724-1-2002 塑料制品.热固性粉末模制化合物试样的注模.第1部分:一般原理和多用途试样的模制 22页
NF EN ISO 10724-2-2001 塑料制品.热固性粉末模制化合物(PMCs)的试样注模.第2部分:小型板 14页
NF EN ISO 10806-2004 管道.波形可弯曲金属管用非合金钢与不锈钢接头 31页
NF EN ISO 10807-1997 管道工作--在易爆环境中保护电缆用的金属波纹形软管组件 14页
NF EN ISO 10819-1996 机械振动和冲击.手柄振动.通过手掌式手套测量和评定振动传输系数的方法 19页
NF EN ISO 10821-2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems. 89页
NF EN ISO 10846-1-2000 声学和振动.弹性元件振动声学传输性能的试验室测量.第1部分:原则和指南 27页
NF EN ISO 10846-2-2000 声学和振动.弹性元件振动声学传输性能的试验室测量.第2部分:平移运动用弹性支架的动态劲度.直接法 25页
NF EN ISO 10846-3-2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3 : indirect method for determination of the dynamic stiffness of resilient supports for translatory motion. 47页
NF EN ISO 10846-4-2004 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4 : dynamic stiffness of elements other than resilient supports for translatory motion. 45页
NF EN ISO 10848-1-2006 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 1 : frame document. 34页
NF EN ISO 10848-2-2006 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2 : application to light elements when the junction has a small influence. 18页
NF EN ISO 10848-3-2006 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 3 : application to light elements when the junction has a substantial influence. 14页
NF EN ISO 10882-1-2001 焊接和相关工艺的防护和安全.工作人员呼吸区空气粒子和气体的取样.第1部分:气体粒子的取样 35页
NF EN ISO 10882-2-2000 焊接和相关工艺的防护和安全.工作人员工作区空气粒子和气体的取样.第2部分:气体取样 31页
NF EN ISO 10931-2006 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system. 47页
NF EN ISO 10938-1998 眼科用仪器--图形投影仪 8页
NF EN ISO 10939-1998 眼科仪器.缝灯显微镜 18页
NF EN ISO 10940-1998 眼科用仪器--眼底照相设备 18页
NF EN ISO 10942-1998 眼科用仪器--直接式检眼镜 19页
NF EN ISO 10943-1998 眼科仪器 间接眼膜曲率镜 17页
NF EN ISO 10944-1998 眼科用仪器--斜视诊疗器 12页
NF EN ISO 10960-1996 橡胶管和塑料管.动态条件下耐臭氧性评定 7页
NF EN ISO 10964-1997 粘合剂--螺纹紧固件上厌氧粘合剂的力矩强度的测定 9页
NF EN ISO 10993-10/A1-2006 Biological evaluation of medical devices - Part 10 : tests for irritation and delayed-type hypersensitivity. 10页
NF EN ISO 10993-10-2003 医用设备的生物评定.第10部分:刺激和致敏试验 62页
NF EN ISO 10993-11-2007 医用设备的生物评定.第11部分:影响全身毒性的试验 37页
NF EN ISO 10993-1-2004 医用机械的生物评价 第1部分:评价和试验 24页
NF EN ISO 10993-12-2005 医用设备的生物评定.第12部分:试样制备和参考物质 26页
NF EN ISO 10993-13-1999 医疗器材的生物评价.第13部分:聚合的医疗器材降解产品的识别与量化 20页
NF EN ISO 10993-14-2002 医疗器材的生物评价.第14部分:陶瓷降解产品的识别与合格鉴定 21页
NF EN ISO 10993-15-2001 医疗器材的生物评价.第15部分:金属和合金的医疗器材降解产品的识别与量化 22页
NF EN ISO 10993-16-1997 医用设备的生物评定 第16部分:降解产物和萃取物的毒理学动态研究 21页
NF EN ISO 10993-17-2003 Biological evaluation of medical devices - Part 17 : establishment of allowable limits for leachable substances. 37页
NF EN ISO 10993-18-2005 Biological evaluation of medical devices - Part 18 : chemical characterization of materials. 27页
NF EN ISO 10993-2-2006 医疗器材的生物评价.第2部分:动物福利要求 23页
NF EN ISO 10993-3-2004 医用设备的生物评价 第3部分:遗传毒性,致癌物和再生毒性试验 27页
NF EN ISO 10993-4/A1-2006 Biological evaluation of medical devices - Part 4 : selection of tests for interaction with blood. 13页
NF EN ISO 10993-4-2004 医用设备的生物学鉴定 第4部分:血液互相作用的试验选择 47页
NF EN ISO 10993-5-1999 医疗器材的生物评价.第5部分:体外细胞毒性试验 18页
NF EN ISO 10993-7-1996 医疗器材生物学评价.第7部分:环氧乙烷消毒残余物 55页
NF EN ISO 10993-8-2001 医疗器材的生物评价.第8部分:生物试验用基准材料的选择和合格鉴定 9页
NF EN ISO 10993-9-1999 医疗器材的生物评价.第9部分:潜在降解产品识别和量化框架 17页
NF EN ISO 1101-2006 技术图。确定几何公差。综合,定义,符号,图上的说明。 64页
NF EN ISO 11052-2006 硬质小麦粉和精制麦麸 黄色颜料含量的测定 11页
NF EN ISO 11058-1999 土工织物及其相关产品.垂直于平面的无负载水渗透性的测定(EN ISO 11058) 20页
NF EN ISO 11064-1-2001 控制中心的人体工效学设计.第1部分:控制中心的设计原理 41页
NF EN ISO 11064-2-2001 控制中心的人类工效设计.第2部分:控制间的设计原则 23页
NF EN ISO 11064-3-2000 控制中心的人类工效学设计.第3部分:控制室设计 44页
NF EN ISO 11064-4-2004 Ergonomic design of control centres - Part 4 : layout and dimensions of workstations. 44页
NF EN ISO 11064-6-2005 Ergonomic design of control centres - Part 6 : environmental requirements for control centres. 28页
NF EN ISO 11064-7-2006 Ergonomic design of control centres - Part 7 : principles for the evaluation of control centres. 29页
NF EN ISO 11070-1999 一次性无菌管内导管导引器(EN ISO 11070) 31页
NF EN ISO 1107-2004 Fishing nets - Netting - Basic terms and definitions. 12页
NF EN ISO 11073-10101-2006 Health informatics - Point-of-care medical device communications - Part 10101 : nomenclature. 506页
NF EN ISO 11073-10201-2006 Health informatics - Point-of-care medical device communication - Part 10201 : domain information model. 187页
NF EN ISO 11073-20101-2006 Health informatics - Point-of-care medical device communication - Part 20101 : application profiles - Base standard. 94页
NF EN ISO 11073-30200-2006 Health informatics - Point-of-care medical device communication - Part 30200 : transport profile - Cable connected. 85页
NF EN ISO 11073-30300-2006 Health informatics - Point-of-care medical device communication - Part 30300 : transport profile - Infrared wireless. 75页
NF EN ISO 11091-1999 城市工程和建筑设计.绿色场所的设计.符号的简单表示法 16页
NF EN ISO 1110-1998 塑料制品.聚酰胺.试样的加速调节 7页
NF EN ISO 11102-1-1997 活塞式内燃机--手柄起动装置 第1部分:安全要求和试验 8页
NF EN ISO 11102-2-1997 活塞式内燃机--手柄起动装置 第2部分:脱离角的试验方法 8页
NF EN ISO 11105-1997 游船 汽油发动机和/或汽油箱机舱的通风 13页
NF EN ISO 11111-1-2005 Textile machinery - Safety requirements - Part 1 : common requirements. 90页
NF EN ISO 11111-2-2005 Textile machinery - Safety requirements - Part 2 : spinning preparatory and spinning machines. 38页
NF EN ISO 11111-3-2005 Textile machinery - Safety requirements - Part 3 : nonwoven machinery. 16页
NF EN ISO 11111-4-2005 Textile machinery - Safety requirements - Part 4 : yarn processing, cordage and rope manufacturing machinery. 26页
NF EN ISO 11111-5-2005 Textile machinery - Safety requirements - Part 5 : preparatory machinery to weaving and knitting. 22页
NF EN ISO 11111-6-2005 Textile machinery - Safety requirements - Part 6 : fabric manufacturing machinery. 30页
NF EN ISO 11111-7-2005 Textile machinery - Safety requirements - Part 7 : dyeing and finishing machinery. 47页
NF EN ISO 11114-1-1998 可运输气瓶 气瓶和阀门材料与气体的兼容性 第1部分:金属材料 41页
NF EN ISO 11114-2-2001 可运输的气体瓶.内装气体的气体瓶和阀门的相容性.第2部分:非金属材料 23页
NF EN ISO 11114-3-1998 可运输的气瓶.气瓶和阀门材料与气体内含物的兼容性.第2部分:氧气氛围下自燃试验 13页
NF EN ISO 11114-4-2006 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : test methods for selecting metallic materials resistant to hydrogen embrittlement. 28页
NF EN ISO 11116-1-1999 气体瓶.气体阀门与气体瓶连接用17E锥螺纹.第1部分:规范 14页
NF EN ISO 11116-2-1999 气体瓶.气体阀门与气体瓶连接用17E锥螺纹.第2部分:检验量规 23页
NF EN ISO 11120-1999 气体容器.压缩气体运输用无缝钢容器,构造.试验 38页
NF EN ISO 11124-1-1997 油漆和有关制品应用前金属衬底的制备--金属喷射清洁的磨料规范 第1部分:一般介绍和分类 10页
NF EN ISO 11124-2-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料规范 第2部分:冷硬铁磨料 11页
NF EN ISO 11124-3-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料规范 第3部分:高碳铸钢喷丸和磨料 13页
NF EN ISO 11124-4-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的金属磨料规范.第4部分:低碳铸钢圆形屑 11页
NF EN ISO 11125-1-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第1部分:取样 8页
NF EN ISO 11125-2-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第2部分:粒度分布测定 9页
NF EN ISO 11125-3-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第3部分:硬度的测定 9页
NF EN ISO 11125-4-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第4部分:表面密度的测定 8页
NF EN ISO 11125-5-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第5部分:缺陷粒子的百分比和显微结构的测定 9页
NF EN ISO 11125-6-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第6部分:外来物质的测定 8页
NF EN ISO 11125-7-1997 色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第7部分:湿度的测定 8页
NF EN ISO 11126-10-2005 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第10部分:铁铅石榴石 11页
NF EN ISO 11126-1-1997 油漆和类似产品涂敷前钢油漆底层的制备 用于喷射制备的非金属磨料规范 第1部分:一般说明和分类 10页
NF EN ISO 11126-3-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第3部分:铜精炼渣 9页
NF EN ISO 11126-4-1998 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料规范.第4部分:溶化灰分 9页
NF EN ISO 11126-5-1998 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料规范.第5部分:镍精炼渣 9页
NF EN ISO 11126-6-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料规范.第6部分:冶金炉渣 9页
NF EN ISO 11126-7-1999 涂装油漆和相关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 10页
NF EN ISO 11126-8-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料规范.第8部分:橄榄石砂 9页
NF EN ISO 11126-9-2005 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石 11页
NF EN ISO 11127-1-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料试验方法.第1部分:取样 9页
NF EN ISO 11127-2-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料试验方法.第2部分:粒度分级分析 8页
NF EN ISO 11127-3-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料试验方法.第3部分:表面密度测定 8页
NF EN ISO 11127-4-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料试验方法.第4部分:通过玻璃刀片试验来评估硬度 8页
NF EN ISO 11127-5-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料试验方法.第5部分:湿度测定 8页
NF EN ISO 11127-6-1997 色漆和有关制品应用前钢衬垫的制备 非金属喷砂清理研磨用试验方法 8页
NF EN ISO 11127-7-1997 油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的非金属磨料试验方法.第7部分:可溶于水的氯化物的测定 8页
NF EN ISO 11130-1999 金属与合金的腐蚀.盐溶液中的交替浸入试验 18页
NF EN ISO 11137-1-2006 Sterilization of health care products - Radiation - Part 1 : requirements for development, validation and routine control of a sterilization process for medical devices. 51页
NF EN ISO 11137-2-2006 Sterilization of health care products - Radiation - Part 2 : establishing the sterilization dose. 76页
NF EN ISO 11137-3-2006 Sterilization of health care products - Radiation - Part 3 : guidance on dosimetric aspects. 29页
NF EN ISO 11138-1-2006 消毒器和消毒过程试验用生物系统--第1部分:一般要求 50页
NF EN ISO 11138-2-2006 消毒器和消毒过程试验用生物系统--第2部分:环氧乙烷消毒器用的特殊系统 15页
NF EN ISO 11138-3-2006 消毒器和消毒过程试验用生物系统--第3部分:蒸气消毒器用特殊系统 18页
NF EN ISO 11138-4-2006 测试消毒器和消毒过程用生物系统.第4部分:辐射消毒器用特殊系统 16页
NF EN ISO 11138-5-2006 测试消毒器和消毒过程用生物系统.第5部分:低温蒸汽和甲醛消毒器用特殊系统 15页
NF EN ISO 11140-1-2005 Sterilization of health care products - Chemical indicators - Part 1 : General requirements. 42页
NF EN ISO 11143-2000 牙科仪器.汞齐合金分离器 30页
NF EN ISO 11144-1997 牙科器械.供水和排水管道的接头 8页
NF EN ISO 11145-2006 光学和光学仪器.激光和激光相关设备.词汇和符号 39页
NF EN ISO 11146-1-2005 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angle and beam propagation ratios - Part 1 : stigmatic and simple astigmatic beams. 24页
NF EN ISO 11146-2-2005 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angle and beam propagation ratios - Part 2 : general astigmatic beams. 23页
NF EN ISO 11149-1997 光学和光学仪器--激光及其有关设备--非远距离通讯激光应用的光纤连接器 8页
NF EN ISO 11151-1-2001 激光及其相关设备.标准光学元件.第1部分:紫外线、可视和近红外光谱范围用元件 19页
NF EN ISO 11151-2-2001 激光及其相关设备.标准光学元件.第2部分:红外光谱范围用元件 19页
NF EN ISO 1119-2003 Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles. 12页
NF EN ISO 11192-2006 Small craft - Graphical symbols. 26页
NF EN ISO 11197-2005 医用电源安全的特殊要求 46页
NF EN ISO 11199-1-1999 双臂使用的助步器.要求和试验方法.第1部分:助步支架 24页
NF EN ISO 11199-2-2005 Walking aids manipulated by both arms - Requirements and test methods - Part 2 : rollators. 30页
NF EN ISO 11199-3-2005 Walking aids manipulated by both arms - Requirements and test methods - Part 3 : walking tables. 31页
NF EN ISO 11200-1997 声学--设备和机器发出的噪声--工作岗位和其它特定位置散发的声压级的测量用基础标准的使用指南 21页
NF EN ISO 11201-1996 声学 机器和设备发出的噪声 工作岗位和其它特定位置散发的声压级的测量 在反射面上的接近自由场条件下的鉴定法 22页
NF EN ISO 1120-2002 传送带.机械紧固件的强度测定.静态试验法 11页
NF EN ISO 11202-1997 声学--设备和机器发出的噪声--工作岗位和其它特定位置散发的声压级的测量--现场测量方法 23页
NF EN ISO 11203-1996 声学.机器和设备发出的噪声.根据声功率测定工作岗位和其它特定位置散发的声压级 15页
NF EN ISO 11204-1996 声学 机器和设备发出的噪声 工作岗位和其它特定位置散发的声压级的测量 需要环境校正的方法 26页
NF EN ISO 11205-2004 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity. 27页
NF EN ISO 11210-1995 首饰业--珠宝业用铂合金中铂含量的测定.六氯二铵铂酸沉淀后的重力测定法 10页
NF EN ISO 11212-1-1997 淀粉及其制品.重金属含量.第1部分:原子吸收光谱法测定砷含量(欧洲标准EN ISO 11212-1) 10页
NF EN ISO 11212-2-1997 淀粉及其衍生制品--重金属含量 第2部分:用原子吸收光谱测定法测定汞的含量 10页
NF EN ISO 11212-3-1997 淀粉及其衍生制品--重金属含量 第3部分:用原子吸收光谱测定法测定铅的含量 11页
NF EN ISO 11212-4-1997 淀粉及其衍生制品--重金属含量 第4部分:用原子吸收光谱测定法测定镉的含量 10页
NF EN ISO 11213-1995 改性淀粉.乙酰基含量测定.酶法 13页
NF EN ISO 11214-1996 改良淀粉.氧化淀粉中羧基含量测定 10页
NF EN ISO 11215-1998 改良淀粉.乙酰化分支淀粉已二酸盐酯油酯酸含量测定 15页
NF EN ISO 11216-1998 改良淀粉.羧甲基淀粉中羧甲基团含量测定 13页
NF EN ISO 11248-1999 塑料制品.热固性模制材料.高温下短期性能的评价 9页
NF EN ISO 11252-2005 激光和激光有关设备 激光器件 文件的最低要求 19页
NF EN ISO 11254-1-2000 激光和激光相关设备.光学表面激光诱导损坏的阈值测定.第1部分:连续试验 31页
NF EN ISO 11254-2-2001 激光和激光相关设备.光学表面激光诱导损坏的阈值测定.第2部分:S-on-1试验 36页
NF EN ISO 11254-3-2006 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3 : assurance of laser power (energy) handling capabilities. 30页
NF EN ISO 1127-1996 不锈钢管.尺寸、公差和常规线密度 12页
NF EN ISO 11290-1/A1-2005 Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1 : detection method - Amendment 1 : modification of the isolation media, of the haemolysis test and inclusion of precis 22页
NF EN ISO 11290-1-1997 食品和动物饲料的微生物学.“李斯特防腐液 单核细胞减少症”的横向检查和计算法.第1部分:探测方法 25页
NF EN ISO 11290-2/A1-2005 Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2 : enumeration method - Amendment 1 : modification of the enumeration medium. 12页
NF EN ISO 11290-2-1998 食品和动物饲料的微生物学.单核细胞增多性李司忒氏菌的横向检查和计算法.第2部分:计数方法(欧洲标准EN ISO 11290-2) 30页
NF EN ISO 11306-1998 金属和合金的腐蚀--金属和合金在表面海水中暴露和评估导则 9页
NF EN ISO 1133-2005 塑料制品.热塑性塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测定 25页
NF EN ISO 11334-1-1997 由单臂操纵的助步器--要求和试验方法 第1部分:肘拐杖 16页
NF EN ISO 11334-4-1999 单臂使用的助步器.要求和试验方法. 第4部分:三柱式或多柱式助步手杖 24页
NF EN ISO 11337-2004 Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography. 21页
NF EN ISO 11339-2005 结构胶粘剂.挠性与挠性粘接组件的T-剥离试验 11页
NF EN ISO 11341-2005 色漆和清漆 模拟气候及模拟辐射爆晒 过滤氙弧灯曝晒 25页
NF EN ISO 11343-2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method. 13页
NF EN ISO 11348-1-1999 水试验.磷光菌亮度抑制性测定 25页
NF EN ISO 11348-2-1999 水质.fischeri弧菌属光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用液体干细菌法 21页
NF EN ISO 11348-3-1999 水质.fischeri弧菌属光发射水样品的抑制效果的测定(发光细菌试验).第3部分:使用冻干细菌法 22页
NF EN ISO 1135-4-2005 Transfusion equipment for medical use - Part 4 : transfusion sets for single use. 28页
NF EN ISO 11357-1-1997 塑料 差动量热分析(DSC) 第1部分:总则 16页
NF EN ISO 11358-1997 塑料 聚合物的热解重量分析(TG) 一般原则 14页
NF EN ISO 11369-1997 水质--植物处理剂的测定--固体-液体提取后采用高性能液体色谱法和紫外测定法 28页
NF EN ISO 11378-2-2001 纺织地毯.实验室土壤试验.第2部分:转鼓试验 25页
NF EN ISO 11380-1996 光学和光学仪器.眼光学.量规 7页
NF EN ISO 11381-1996 光学和光学仪器.眼光学.螺纹 8页
NF EN ISO 11399-2001 热环境的人类工效学.有关国际标准的原则及应用 33页
NF EN ISO 11401-1998 塑料.酚醛树脂.通过液相色谱法分离 11页
NF EN ISO 1140-2005 一般用途纤维绳--聚酰胺 12页
NF EN ISO 11402-2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content. 18页
NF EN ISO 11403-1-2003 Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties. 26页
NF EN ISO 11403-2-2004 Plastics - Acquisition and presentation of comparable multipoint data - Part 2 : thermal and processing properties. 20页
NF EN ISO 11403-3-2001 塑料制品.可比较的多点数据的采集和表示法.第3部分:环境对性能的影响 27页
NF EN ISO 11409-1998 塑料.酚醛树脂.差动扫描量热法测定反应热和温度 12页
NF EN ISO 1141-2005 一般用途纤维绳--聚酯 12页
NF EN ISO 11426-1999 金珠宝合金中金的测定.灰吹法(火焰试金) 11页
NF EN ISO 11431-2003 连接产品. 经玻璃窗照射后连续拉力附着粘度试验 12页
NF EN ISO 11432-2005 房屋建筑.密封剂.抗压缩测定 11页
NF EN ISO 11439-2001 气体瓶.用作机动车燃料的车上存储天然气用的高压气体瓶 86页
NF EN ISO 11442-2006 Technical product documentation - Document management. 17页
NF EN ISO 11446-2004 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage. 15页
NF EN ISO 11468-1999 塑料.试验用PVC糊料的制备.溶解器法(EN ISO 11468) 10页
NF EN ISO 11469-2000 塑料--塑料制品的一般识别和标记 9页
NF EN ISO 11489-1995 铂饰用合金中铂含量测定.用氯化汞还原法测定重量 10页
NF EN ISO 11490-1995 钯饰用合金中钯含量的测定--二甲基乙二肟重量分析法 10页
NF EN ISO 11498-1999 牙钻手柄.牙科用低压电动机 19页
NF EN ISO 11499-1999 牙科工艺。牙科喷注筒 13页
NF EN ISO 11501-2004 塑料膜。受热后尺寸变化的测定。 10页
NF EN ISO 11502-2005 Plastics - Film and sheeting - Determination of blocking resistance. 10页
NF EN ISO 11507-2001 色漆和清漆 涂层暴露于人工风化 暴露于UV荧光和水 19页
NF EN ISO 11541-2003 Natural gas - Determination of water content at high pressure. 15页
NF EN ISO 11542-1-2001 塑料制品.超高分子量聚乙烯模制和挤制材料.第1部分:规范用标识系统和基础 13页
NF EN ISO 11542-2-1999 塑料.超高分子量聚乙烯模塑和挤制材料.第2部分:试样制备和性能测定 20页
NF EN ISO 11543-2002 改良淀粉.羟丙基含量的测定.质子核磁共振分光测定法 13页
NF EN ISO 11545-2002 农业浇灌设备.带喷头或喷嘴的中心轴旋转和横向移动浇灌机械.水分配均匀性的测定 23页
NF EN ISO 11546-1-1996 声学.包壳声绝缘性的性能.第1部分:实验室条件下的测量(声明用途) 24页
NF EN ISO 11546-2-1996 声学.外壳声绝缘性的测定.第2部分:现场测量(验收和检定用) 26页
NF EN ISO 11547/A1-2000 小艇.起动机构保护 5页
NF EN ISO 11547-1995 小型船舶--齿轮起动保护装置 6页
NF EN ISO 11551-2004 Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components. 25页
NF EN ISO 11553-1-2005 Safety of machinery - Laser processing machines - Part 1 : general safety requirements. 27页
NF EN ISO 11554-2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics. 28页
NF EN ISO 11562-1998 几何产品规范--表面结构:轮廓法--相位校正过滤器的计量特性 13页
NF EN ISO 11568-1-1996 银行业务 关键字管理 第1部分:关键字管理导言 19页
NF EN ISO 11568-2-1996 银行业务 关键字管理 第2部分:对称密码用关键字管理技术 24页
NF EN ISO 11568-3-1996 银行业务 关键字管理 第3部分:对称密码用关键字寿命周期 16页
NF EN ISO 1157-1999 塑料.稀溶液中的乙酸纤维素.粘度值和粘度率的测定 9页
NF EN ISO 1158-1998 塑料.氯乙烯均聚物和共聚物.氯含量的测定 10页
NF EN ISO 11591-2001 小艇.发动机驱动.由舵手位置看的视野范围 12页
NF EN ISO 11592-2001 船体小于8米的小艇.最大推进功率的测定 22页
NF EN ISO 11593-1998 操纵工业机器人--自动终端操纵装置交换系统--特性用语和表示法 26页
NF EN ISO 11600-2004 连接产品.接合部的水密性密封剂 16页
NF EN ISO 11606-2002 船舶和海洋技术.航海用电磁罗盘 21页
NF EN ISO 11607-1-2006 Packaging for terminally sterilized medical devices - Part 1 : requirements for materials, sterile barrier systems and packaging systems. 38页
NF EN ISO 11607-2-2006 Packaging for terminally sterilized medical devices - Part 2 : validation requirements for forming, sealing and assembly processes. 23页
NF EN ISO 11608-1-2001 医疗用笔式注射器.第1部分:笔式注射器.要求和试验方法 35页
NF EN ISO 11608-2-2001 医疗用笔式注射器.第2部分:针头.要求和试验方法 19页
NF EN ISO 11608-3-2001 医疗用笔式注射器.第3部分:成品药筒.要求和试验方法 23页
NF EN ISO 11609-1998 牙科 牙膏 要求、试验方法和标志 25页
NF EN ISO 11621-2006 可运输气瓶(GPL除外) 用于改变使用的程序 21页
NF EN ISO 11623-2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders. 44页
NF EN ISO 1163-1-1999 氯乙烯均聚物和共聚物非增塑成分。名称。 11页
NF EN ISO 1163-2-1999 塑料.未增塑聚氯乙烯(PVC-U)模塑和挤制材料.第2部分:试样制备和性能测定 11页
NF EN ISO 11640-2000 皮革.色牢度试验.耐往复式摩擦循环的色牢度 11页
NF EN ISO 11641-2004 Leather - Tests for colour fastness - Colour fastness to perspiration. 14页
NF EN ISO 11642-2000 皮革.色牢度试验.耐水色牢度 10页
NF EN ISO 11643-2000 皮革。综合。印染牢度的试验。耐有机溶剂(全氯乙烯)洗涤牢度的测定 12页
NF EN ISO 11644-2004 Leather - Test for adhesion of finish. 17页
NF EN ISO 11646-2000 皮革.面积的测量 8页
NF EN ISO 11654-1997 声学.建筑物用吸音器.吸音额定值 15页
NF EN ISO 11667-1999 纤维增强塑料。预浸件。纤维和树脂含量的测定。 17页
NF EN ISO 11668-2002 色漆和清漆用粘合剂 氯化聚合物树脂 通用试验方法 10页
NF EN ISO 11670-2003 Lasers and laser-related equipment - Test methods for laser beam parameters : Beam positional stability. 28页
NF EN ISO 1167-1-2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of resistance to internal pressure - Part 1 : general method. 16页
NF EN ISO 1167-2-2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2 : preparation of pipe test pieces. 10页
NF EN ISO 11674-2002 船舶和海洋技术.航向控制系统 21页
NF EN ISO 11680-1-2000 林业机械.动力杆式整枝剪的安全要求和试验.第1部分:整体式内燃机的配件装置 42页
NF EN ISO 11680-2-2000 林业机械.动力杆式整枝剪的安全要求和试验.第2部分:背负式电源装置上使用的切削工具 27页
NF EN ISO 11681-1-2004 农林机械 手提式链锯 安全 31页
NF EN ISO 11681-2-2006 森林机械.便携式链锯.安全要求和试验.第2部分:伐木链锯 35页
NF EN ISO 11683-1997 包装--触摸危险警告--要求 11页
NF EN ISO 11688-1-1998 声学.低噪音机器设备设计推荐标准.第1部分:设计 55页
NF EN ISO 11688-2-2004 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2 : introduction to the physics of low-noise design. 57页
NF EN ISO 11689-1997 声学.机器和设备声传播数据的比较程序 23页
NF EN ISO 11690-1-1997 声学.包含机器的噪声降低的工作场所设计用建议作法.第1部分:噪音降低战略 36页
NF EN ISO 11690-2-1997 声学.包含机器的噪声降低的工作场所设计用建议作法.第2部分:降低噪音的方法 36页
NF EN ISO 11690-3-1999 声学.含机械设备的低噪音工作场所用推荐操作规程.第3部分:工作间的声音传播和噪声预测 43页
NF EN ISO 11691-1996 声学.无水流管道上灭声器插入损失的测定.实验室测量方法 12页
NF EN ISO 11721-1-2001 纺织品.含纤维素织物耐微生物性能的测定.土壤掩埋试验.第1部分:腐烂延迟结束的评价 16页
NF EN ISO 11721-2-2004 Textiles - Determination of the resistance of cellulose containing textiles to microorganisms - Soil burial test - Part 2 : identification of long-term resistance of a rot retardant finish. 9页
NF EN ISO 1172-1999 玻璃织物增强塑料。燃烧损失的测定。 12页
NF EN ISO 11732-2005 水质 用流量分析(CFA 和 FIA)和分光计检测法测定含氨氮 28页
NF EN ISO 11733-2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test. 39页
NF EN ISO 11734-1998 水质.消化污泥中有机化合物的"最大"厌氧生物降解力的评价.生物气体制品测量法 20页
NF EN ISO 11737-1-2006 Sterilization of medical devices - Microbiological methods - Part 1 : determination of a population of microorganisms on products. 50页
NF EN ISO 11737-2-2000 医疗器材的消毒.微生物法.第2部分:消毒过程确认进行的无菌试验 24页
NF EN ISO 11758-1998 橡胶或塑料管.氙弧灯照射法.色彩和外形变化测定 17页
NF EN ISO 11806-1997 农林机械.便携手扶式内燃机驱动灌木铲除机和草修剪机.安全性 31页
NF EN ISO 11807-1-2005 Integrated optics - Vocabulary - Part 1 : basic terms and symbols. 29页
NF EN ISO 11807-2-2005 Integrated optics - Vocabulary - Part 2 : terms used in classification. 18页
NF EN ISO 11810-1-2005 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient-protective covers - Part 1 : primary ignition and penetration. 20页
NF EN ISO 1181-2005 一般用途纤维绳--马尼拉麻和西沙尔麻 12页
NF EN ISO 11812-2003 Small craft - Watertight cockpits and quick-draining cockpits. 46页
NF EN ISO 11816-1-2006 牛奶和奶产品.用荧光剂方法对碱性磷酸酶活性的测定.第1部分:牛奶和奶饮料 20页
NF EN ISO 11816-2-2003 Milk and milk products - Determination of alkaline phosphatase activity - Part 2 : fluorometric method for cheese. 17页
NF EN ISO 11819-1-2002 声学.道路表面对交通噪声的影响的测量.第1部分:旁路统计法 43页
NF EN ISO 11820-1997 声学.现场消声器的测量 27页
NF EN ISO 11821-1997 声学--可移动屏蔽物的现场声衰减测量 17页
NF EN ISO 1182-2002 建筑材料着火反应试验.不可燃性试验 34页
NF EN ISO 1183-1-2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1 : immersion method, liquid pyknometer and titration method. 17页
NF EN ISO 1183-2-2005 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method. 16页
NF EN ISO 1183-3-1999 塑料.非泡沫塑料密度的测定方法.第3部分:气体比重瓶法 15页
NF EN ISO 11833-2-2006 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics Part 2 : sheets of thickness less than 1mm. 11页
NF EN ISO 11857-2002 Textile floor coverings - Determination of resistance to delamination. 9页
NF EN ISO 11885-1998 水质--采用电感耦合等离子原子发射光谱技术测定33种元素 18页
NF EN ISO 11890-1-2002 色漆和清漆 挥发性有机化合物(VOC)的测定 第1部分:各种方法 14页
NF EN ISO 11890-2-2007 色漆和清漆 挥发性有机化合物(VOC)的测定 第2部分:气相色谱法 22页
NF EN ISO 11897-2001 包装.热塑性塑料软薄膜制造的包装袋.边缘折叠处的撕裂蔓延 11页
NF EN ISO 11904-1-2003 Acoustics - Determination of sound immission from sound sources placed closed to the ear - Part 1 : technique using a microphone in a real ear (MIRE technique). 31页
NF EN ISO 11904-2-2005 Acoustics - Determination of sound immissions from sound sources placed close to the ear - Part 2 : technique using a manikin (manikin-technique). 28页
NF EN ISO 11905-1-1998 水质--氮的测定--第1部分:使用过氯化硫酸氢盐 21页
NF EN ISO 11908-1998 色漆和清漆用粘合剂 氨基塑料树脂 一般试验方法 8页
NF EN ISO 11909-1998 色漆和清漆用粘合剂 聚异氰酸盐树脂 一般试验方法 10页
NF EN ISO 119-1998 塑料。酚醛塑料模制件。游离酚的测定。碘量测定法 7页
NF EN ISO 11925-2-2002 着火反应试验.直接受火的建筑物的可燃性.第2部分:单一火源试验 27页
NF EN ISO 11957-1997 声学.室内隔声性能的测定.现场实验室测量 19页
NF EN ISO 11960-2005 石油和天然煤气工业--井管或井套用的钢管 305页
NF EN ISO 11961-1997 石油和天然气工业.钻井杆钢管.规范 34页
NF EN ISO 11963-1995 塑料.聚碳酸酯板.类型、尺寸和性能 12页
NF EN ISO 11969-1996 水质.砷的测定.原子吸收分光光度法(氢化物技术) 13页
NF EN ISO 11978-2000 眼科光学.隐形眼镜和隐形眼镜护理用品.由厂商提供的信息 14页
NF EN ISO 11979-10-2006 Ophthalmic implants - Intraocular lenses - Part 10 : phakic intraocular lenses. 26页
NF EN ISO 11979-1-2006 眼科植入物.眼内镜片.第1部分:词汇 22页
NF EN ISO 11979-2-2000 眼科植入物.眼内透镜.第2部分:光学性能和试验方法 29页
NF EN ISO 11979-3-2006 眼科植入物.眼内晶状体.第3部分:机械性能和试验方法 41页
NF EN ISO 11979-4-2000 眼科植入物.眼内晶状体.第4部分:标签及信息 16页
NF EN ISO 11979-5-2006 眼科植入物.眼内晶状体.第5部分:生物相容性 32页
NF EN ISO 11979-8-2006 眼科植入物.眼内透镜.第8部分:基本要求 12页
NF EN ISO 11979-9-2006 Ophthalmic implants - Intraocular lenses - Part 9 : multifocal intraocular lenses. 26页
NF EN ISO 11980-1998 眼科光学--接触透镜和接触透镜保护产品--临床研究导则 25页
NF EN ISO 11981-1999 眼科光学.隐形眼镜和隐形眼镜保护产品.隐形眼镜与隐形眼镜保护产品的物理兼容性测定(EN ISO 11981) 12页
NF EN ISO 11985-1998 眼科光学--接触透镜--暴露在紫外线和可见辐射线(在玻璃试管内)中的寿命 10页
NF EN ISO 11986-2000 眼科光学.隐形眼镜和隐形眼镜护理用品.防腐剂的吸收和释放率测定指南 10页
NF EN ISO 11987-1998 眼科光学--接触透镜--架子寿命的测定 13页
NF EN ISO 11990-2004 Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts. 20页
NF EN ISO 11997-1-2006 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1 : wet (salt fog)/dry/humidity. 23页
NF EN ISO 11997-2-2006 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2 : wet (salt fog)/dry/humidity/UV light. 15页
NF EN ISO 11998-2006 色漆和清漆 涂层的耐湿式洗涤和清洗性测定 19页
NF EN ISO 12001-1997 声学.机械和设备噪声.噪声试验代码的设计和说明规则(欧洲标准EN ISO 12001) 27页
NF EN ISO 1-2002 几何产品规范(GPS).产品产品规范和验证的标准参照温度 9页
NF EN ISO 12005-2004 Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization. 21页
NF EN ISO 12017-1996 塑料.双层和三层壁的聚甲基丙烯酸甲酯板.试验方法 19页
NF EN ISO 120-1998 塑料。酚醛塑料模制件。游离氨和氨化物的测定。比色法 6页
NF EN ISO 12020-2000 水质.铝的测定.原子吸收光谱测定法 16页
NF EN ISO 12048-2001 包装.满装运输包装件.利用压缩试验机的压缩和堆码试验 11页
NF EN ISO 12058-1-2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method. 13页
NF EN ISO 1207-1994 槽式圆头螺钉 产品等级A 9页
NF EN ISO 12085-1998 几何产品规范(GPS).表面结构:轮廓检测法.主要参数 26页
NF EN ISO 12086-1-2006 塑料.含氟聚合物的分散、模塑和挤制材料.第1部分:命名制度及规范的基础 39页
NF EN ISO 12086-2-2006 塑料.含氟聚合物的分散、模塑和挤制材料.第2部分:试样制备和性能测定 58页
NF EN ISO 12100-1-2004 机械安全.基本概念,设计的一般原理.第1部分:基本术语,方法学 45页
NF EN ISO 12100-2-2004 机器安全--设计用基本概念,普通原理--第2部分:技术原理和规范 44页
NF EN ISO 1211-2001 牛奶.脂肪含量的测定.重量分析法(参照法) 21页
NF EN ISO 12114-1997 纤维强化塑料 可热固和预浸渍模压复合物 硬化性能的测定 20页
NF EN ISO 12115-1997 纤维强化塑料 可热固和预浸渍模压混合料 塑性、熟化和寿命的测定 19页
NF EN ISO 12137-1-2006 Paints and varnishes - Determination of mar resistance - Part 1 : method using a curved stylus. 15页
NF EN ISO 12137-2-2006 Paints and varnishes - Determination of mar resistance - Part 2 : method using a pointed stylus. 15页
NF EN ISO 12138-1997 纺织品.纺织纤维易燃性试验前家庭洗涤方法 15页
NF EN ISO 12156-1-2006 柴油燃料.使用高频往复装置(HFRR)对润滑性的评定.第1部分:试验方法 21页
NF EN ISO 12162-1995 压力设备管和接水用热塑性材料.分类和命名.总工作系数(计算) 9页
NF EN ISO 12179-2000 几何产品规范(GPS).表面结构:轮廓检测法.接触(触针)仪器的校准 26页
NF EN ISO 12185-1996 原油和石油产品.密度的测定.振动U形管 15页
NF EN ISO 12193-2004 Animal and vegetable fats and oils - Determination of lead by direct graphite furnace atomic absorption spectroscopy. 13页
NF EN ISO 12205-1996 石油产品.石油中间馏出物氧化稳定性的测定 12页
NF EN ISO 12209-1-2001 气体瓶.压缩呼吸空气的气体瓶阀门的出口连接件.第1部分:轭型连接件 11页
NF EN ISO 12209-2-2001 气体瓶.装压缩呼吸空气用的气体瓶阀门的出口连接.第2部分:螺纹连接件 17页
NF EN ISO 12209-3-2001 气体瓶.压缩呼吸空气气体瓶阀门的出口连接.第3部分:230巴阀门的转接器 11页
NF EN ISO 12213-1-2005 Natural gas - Calculation of compression factor - Part 1 : introduction and guidelines. 20页
NF EN ISO 12213-2-2005 Natural gas - Calculation of compression factor - Part 2 : calculation using molar-composition analysis. 39页
NF EN ISO 12213-3-2005 Natural gas - Calculation of compression factor - Part 3 : calculation using physical properties. 42页
NF EN ISO 12215-1-2001 小艇.船体的构造.第1部分:材料:热固性树脂 12页
NF EN ISO 12215-2-2002 Small craft - Hull construction and scantlings - Part 2 : materials : core materials for sandwich construction, embedded materials. 16页
NF EN ISO 12215-3-2002 小艇.船体构造和材料尺寸.第3部分:材料:钢、铝合金、木材和其它材料 19页
NF EN ISO 12215-4-2002 Small craft - Hull construction and scantlings - Part 4 : workshop and manufacturing. 19页
NF EN ISO 12216-2002 小艇.窗口、左舷灯、舱口、舷窗盖和门.强度和不透水性要求 73页
NF EN ISO 12217-1-2002 小艇.稳定性、浮力评定和分类.第1部分:船身长度大于等于6米的无帆船 62页
NF EN ISO 12217-2-2002 小艇.稳定性、浮力评定和分类.第1部分:船身长度大于等于6米的帆船 73页
NF EN ISO 12217-3-2002 小艇.稳定性和浮力评定和分类.第3部分:船体长度小于6米的船 61页
NF EN ISO 12224-1-1998 助熔填充焊丝和实芯焊条.规范和试验方法.第1部分:分类和性能要求(欧洲标准EN ISO 12224-1) 18页
NF EN ISO 12224-2-1999 软钎焊用药芯焊丝.规范和试验方法.第2部分:钎剂含量的测定 8页
NF EN ISO 12224-3-2004 实心和管状钎料焊丝.规范和试验方法.第3部分:管状钎料焊丝效能的润湿平衡法 14页
NF EN ISO 12228-1999 动物和植物脂肪和油脂.分和总甾醇含量的测定.气相色谱法 24页

标准获取办法:

在线提交 点击提交信息  (推荐)
电话联系 010-8334-5348  刘老师
电子邮件 wwtrans@126.com

 

分享到:
或许你还对下面的文章感兴趣
最新文章
最热关注
本月排行
Copyright 2000-2020 标准信息网. Some Rights Reserved | DESIGN BY [A]